• Journal of Oral Medicine and Pain
• /
• v.32 no.4
• /
• pp.365-373
• /
• 2007

Destruction of oral soft and hard tissues and resulting problems seriously affect the life quality of xerostomic patients. Although artificial saliva is the only regimen for xerostomic patients with totally abolished salivary glands, currently available artificial salivas give restricted satisfaction to patients. The purpose of this study was to contribute to the development of ideal artificial saliva through comparing viscosity and wettability between CMC solutions and human saliva. Commercially-available CMC is dissolved in simulated salivary buffer (SSB) and distilled deionized water (DDW). Various properties of human whole saliva, human glandular saliva, and a CMC-based saliva substitutes known as Salivart and Moi-Stir were compared with those of CMC solutions. Viscosity was measured with a cone-and-plate digital viscometer at six different shear rates, while wettability on acrylic resin and Co-Cr alloy was determined by the contact angle. The obtained results were as follows: 1. The viscosity of CMC solutions was proportional to CMC concentration, with 0.5% CMC solution displaying similar viscosity to stimulated whole saliva. Where as a decrease in contact angle was found with increasing CMC concentration. 2. The viscosity of human saliva was found to be inversely proportional to shear rate, a non-Newtonian (pseudoplastic) trait of biological fluids. The mean viscosity values at various shear rates increased as follows: stimulated parotid saliva, stimulated whole saliva, unstimulated whole saliva, stimulated submandibular-sublingual saliva. 3. Contact angles of human saliva on the tested solid phases were inversely correlated with viscosity, namely decreasing in the order stimulated parotid saliva, stimulated whole saliva, unstimulated whole saliva, stimulated submandibular-sublingual saliva. 4. Boiled CMC dissolved in SSB (CMC-SSB) had a lower viscosity than CMC-SSB (P < 0.01 at shear rate of $90s^{-1}$). 5. For human saliva, contact angles on acrylic resin were significantly lower than those on Co-Cr alloy (P < 0.01). 6. Comparing CMC solutions with human saliva, the contact angles between acrylic resin and human saliva solutions were significantly lower than those between acrylic resin and CMC solutions, including Salivart and Moi-Stir (P <0.01). The effectiveness of CMC solutions in terms of their rheological properties was objectively confirmed, indicating a vital role for CMC in the development of effective salivary substitutes.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.3
• /
• pp.785-794
• /
• 2014

Hydrologic responses in watershed are determined by complex interactions among climate, land use, soil and vegetation. In order to effectively investigate hydrologic response in watershed, one needs to analyze the characteristics of climate as well as other factors. In this study, the relative contribution of climate factors and watershed characteristics on hydrologic response is investigated by using hydrologic indexes such as the aridity index and the Horton index. From preliminary analysis, it is shown that the Horton index is proper in terms of classifying hydrologic responses in main natural watersheds of south Korea. While climate and watershed characteristics both contributes to hydrologic responses, the degree contributed from each factor is changed depending on annual climatic humid conditions. In dry conditions, the climate factor is the predominant influence on hydrologic responses. However, in wet conditions, the contribution of watershed characteristics on hydrologic responses is relatively increased.

• Korean Journal of Medicinal Crop Science
• /
• v.2 no.3
• /
• pp.211-218
• /
• 1994

This experiment was conducted to obtain basic information for the establishment of in vitro initial culture system in Fritillaria thuubergii Miq. Methods of surface sterilization of scale segments as explant and effect of antibiotics added into the culture medium on contamination of explant and chilling treatment of mother bulb on bulblet formation were investigated. Portent of contamination of cultured scale segments was significantly higher in the outer scale segments which were unsuitable as initial culture explant than inner scale segments. Contamination of explants taken from inner scale of bulb was reduced by surface sterilizing explants in the solution of $4{\sim}5%$ sodium hypoclorite for $10{\sim}15$ mimutes. Addition of antibiotics such as kanamycin, vancomycia cefotaxim, agrirnycin and agreptomycin and dithane as fungicide and$lncyte^{tm}$ into MS medium was effective to reduce bateriological contamination, but did not work to control fungi. It had effective to delay the degree of contamination caused by fungi and bacteria haboring in cultured explants. Bulblet formation from cultured scale segments was promoted by dry storage for $2{\sim}4$ weeks or moisture storage of mother bulbs for $4{\sim}6$ weeks at $10^{\circ}C$ before excision of explants. Addition of kinetin into medium could not exerted for the bulblet formation from the scale segment of dry storaged bulb compared to control. But explant taken from 6 week moisture storaged bulb formed more than 10 bulblets per explant on the medium containing $3{\sim}5mg/L$ kinetin.

• Journal of Bio-Environment Control
• /
• v.22 no.3
• /
• pp.262-269
• /
• 2013

This study was carried out in order to examine the germination characteristics of Ligularia fischeri seeds, and it was to develop the more efficient pre-treatment and production system of the seeds. It was performed by two ways - temperature control (10, 15, 20 and $25^{\circ}C$) and shading treatment (Full sunlight, 35%, 50%, 75% and 95% of full sunlight). Seed pre-treatment before the each experiment was carried out by temperature (with low temperature and wetting treatment (LTW) for 0, 15, 30, 45 and 60days) and shading treatment (with drying at room temperature (DRT), drying at low temperature (DLT) and water soaking (WS) for 2 days). Seeds of L. fischeri were, regardless of seed pre-treatment, germinated well at $10^{\circ}C$ and the more temperature went up, the more germination rate went down. As a result of surveying shading treatment, 75% shading with DRT was the highest germination rate (68.1%) and 95% shading with WS was the lowest germination rate (48.6%). It was showed over-growth under 95% shading treatment experiment and withered in the full sunlight. As a result of surveying the whole experiment, L. fischeri seeds pre-treated with LTW for 15 days germinated well at $10^{\circ}C$ and under 50~75% shading treatment.

• Journal of Navigation and Port Research
• /
• v.36 no.10
• /
• pp.825-832
• /
• 2012

GPS signal delay that caused by dry gases and water vapor in troposphere is a main error source of GPS point positioning and it must be eliminated for precise point positioning. In this paper, we implemented to generate tropospheric delay grid map over the Korean Peninsula based on post-processing method by using the GPS permanent station network in order to determine the availability of tropospheric delay generation algorithm. GIPSY 5.0 was used for GPS data process and nationwide AWS observation network was used to calculate the amount of dry delay and wet delay separately. As the result of grid map's accuracy analysis, the RMSE between grid map data and GPS site data was 0.7mm in ZHD, 7.6mm in ZWD and 8.5mm in ZTD. After grid map accuracy analysis, we applied the calculated tropospheric delay grid map to single frequency relative positioning algorithm and analyzed the positioning accuracy enhancement. As the result, positioning accuracy was improved up to 36% in case of relative positioning of Suwon(SUWN) and Mokpo(MKPO), that the baseline distance is about 297km.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.1
• /
• pp.47-54
• /
• 2008

In this study, the effect of water content condition was investigated on the Mohr-Coulomb shear strength parameters which are commonly used as the input data in the soil slope analysis. For the purpose, a series of direct shear test was conducted in different water content conditions on the two types of weathered soils and a dam core material, obtained from the domestic slope construction sites and the dam construction site, respectively. The comparisons between the values of the Mohr-Coulomb ${\phi}_{peak}$ and $c_{peak}$, estimated from the relationships between the normal stress and the peak shear stress for the samples in the four different water content conditions (i.e., dry side, optimum, wet side, and saturated), showed that overall, the values of $c_{peak}$ decreased gradually while those of ${\phi}_{peak}$ did not vary much with increasing the water content. A rough estimate for the varying ratio of the values of ${\phi}_{peak}$ and $c_{peak}$ indicated that the values of $c_{peak}$ decreased by every 25% of the $c_{peak}$ values in dry side, while those of ${\phi}_{peak}$ were constant, as the water content condition changed from dry, optimum, and wet to saturated, respectively.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.1037-1047
• /
• 2013

A systematic laboratory compaction testing was performed with the laboratory seismic measurements of the compacted specimens sampled from various compaction fills and was supplemented with in-situ seismic testing to investigate the effects of compaction energy on the elastic wave velocities of the railway roadbed materials. The both variances of the compressive and shear wave velocities with moisture content curve ($V_p$-w and $V_s$-w curves) are similar to the general trend of the density-moisture content curve(${\gamma}_d$-w curve). At the wet side of optimal moisture content (OMC), either $V_p$ or $V_s$ does not significantly increase, which is well reflecting the no gaining in density with the increasing compaction energy exceeding modified-D compaction effort. $V_p$ increases linearly with ${\gamma}_d$ at the dry side of OMC, while it does exponentially at the wet side. The in-situ wave velocities were found to be influenced by the level of confinement and $V_s$ was more sensitive to compaction energy than $V_p$.

• Geophysics and Geophysical Exploration
• /
• v.9 no.4
• /
• pp.304-315
• /
• 2006

We have examined the applicability of f-k analysis to the GPR direct wave measurement for water content to characterize vadose zone condition. When the vadose zone consists of a dry surface layer over wet substratum, we obtained f-k spectra where most of the energy is bounded by the air and dry soil velocities. In this case, dry soil velocity was successfully estimated by using high frequency data. On the other hands, when wet soil overlies dry substratum, the f-k spectra show a contrasting response where most of the energy travels with the velocity bounded by dry and wet soil velocities. In this case, the radar waves are trapped and guided within wet soil layer, exhibiting velocity dispersion. By adopting modal propagation theory, we could formulae a simple inversion code to find two layer's dielectric constants as well as layer thickness. By inverting the velocity dispersion curve obtained from f-k spectra of synthetic modeling data, we could obtain good estimates of dielectric constants of each layer as well as first layer thickness. Moreover, we could obtain more accurate results by including the higher mode data. We expect this method will be useful to get the quantitative property of real subsurface when the field condition is similar.

• Korean Journal of Weed Science
• /
• v.7 no.1
• /
• pp.19-28
• /
• 1987

These experiments were conducted to recognize the germination change in relation to storage period, using 25 kinds of field-collected weed seeds stored under the dry and low temperature ($4{\pm}1^{\circ}C$), and to establish a simple germination induction methods in some kinds of them. No or weak dormancy was observed in Lepidium virginicum, Rumex japonicus, Cirsium japonicum var. ussuriense, Aeschnomene indica and Ludwigia prostrate. The germination of Digltaria sanguinalis, Portulaca oleracea, Amaranthus spp., Echinochloa crux-galli, Polygonum persicaria, Cyperus iria, and Aeschynnmene indica was enhanced by $H_2SO_4$ treatment for 20, 2, 2, 50, 40, 3 or 5 minutes, respectively. Favorable germination in Polygonum persicaria and Echinochloa crus-galli was obtained by soaking in water for 25 days and 50 days, respectively. Moisture treatment for 21 days and 14 days caused the enhancement of germination in Cyperus difformis and Aneilema keisak, respectively. Combination of various treatments in Cyperus iria was most effective when the seeds treated with $H_2SO_4$ for 3 minutes incubated in alternating temp. after soaking in 0.2% $KNO_3$, but their effect on Digitaria sanguinnlis was little.

• Geotechnical Engineering
• /
• v.11 no.4
• /
• pp.63-74
• /
• 1995

Much of Taegu and Kyungpook areas are composed of sedimentary rocks. This paper is concerned with the engineering characteristi os of weathered shale soils and mudstone soils. In this study, the engineering characteristics of weathered shale soils and mudstone soils are investigated by performing tests such as compaction, gradation, CBR permeability and crushability according to compaction energy and water content. The experiments were carried out to obtain the relationships of the ratio of surface area(Sw'/Sw) and the indez of crushing(IC) The results are found as follows : (1) Weathered shale soils are larger than weathered mudstone soils in maximun dry den sixty, but weathered shale soils are smaller than weathered mudstone soils in OMC. (2) Minimum permeability is found in OMC's 1~2% wet side, and the more compaction energy is high, the more the change's range of permeability becomes narrow. (3) There is linear correlation between the ratio of surface area and the indez of crushing. IC : 14.286sw'/Sw -8.429(r=0.9937) (4) Soaked CBR value becomes maximum in OMC's dry side, and it decreases as the water content increases. Whereas the more compaction energy is high the more unsoaked and soaked CBR values are high in OMC's dry side, unsoaked and soaked CBR values are opposed to that in OMC's wet side.