• Title/Summary/Keyword: 습식 집진기

Search Result 19, Processing Time 0.025 seconds

실내 공기청정기 기술개발동향

  • 김용진
    • The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
    • /
    • v.33 no.4
    • /
    • pp.12-16
    • /
    • 2004
  • 공기청정기의 기술 현황 고찰과 함께 현재 국내 공기청정기의 기술 개발 현황 및 제품성능의 발달에 대한 추이에 대하여 고찰하고자 한다. 공기청정기는 실내 공기에 존재하는 입자상 또는 가스상의 오염물질을 제거하는 장치로, 구조 및 기능에 따라 집진만 또는 집진 및 탈취를 목적으로 하는 장치로 크게 기계식과 전기식인 것으로 구분할 수 있으며, 기계식은 다시 건식과 습식으로 구분할 수 있다. 기계식은 여재를 사용하거나 물을 분무하여 집진만 또는 집진 및 탈취론 하는 공기청정기이며, 전기식은 고전압을 이용하여 분진을 하전 시켜 집진만 또는 집진 및 탈취를 하는 공기청정기이다.(중략)

  • PDF

Comparison of Cold Vapor Atomic Absorption Spectrophotometry Analysis and EPA Method 101A for Measurement of Mercury in the Flue Gas (배출가스중 수은 측정을 위한 환원기화 원자흡광광도법과 EPA Method 101A의 비교 연구)

  • 김경희;최양일;박일수;홍지형;차준석;석광설;김대곤
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 1999.10a
    • /
    • pp.92-93
    • /
    • 1999
  • 수은은 상온에서 액체상태로 존재하는 유일한 금속으로서, 증기압이 매우 높기 때문에 가장 쉽게 휘발될 수 있는 중금속이다. 다른 중금속들은 거의 입자 상태로 변환되기 때문에 전기 집진기 등과 같은 일반적인 입자 제어시설에서 98%이상이 제거되지만, 증기압이 매우 높은 수은은 다단계 습식 스크러버, 활성탄을 사용하는 전기집진기/습식 스크러버가 결합된 특정한 방지시설에 없는 한 거의 대부분이 그대로 배출된다.(중략)

  • PDF

A Study on the Emission Characteristics of Mercury from Municipal Solid Waste Incineration (생활 폐기물 소각시설에서의 수은 배출특성에 관한 연구)

  • 강경희;홍지형;최양일;박일수;차준석;석광설;김대곤
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 2000.04a
    • /
    • pp.103-104
    • /
    • 2000
  • 수은은 상온에서 액체상태로 존재하는 유일한 금속으로서, 증기압이 매우 높기 때문에 가장 쉽게 휘발될 수 있는 중금속이다. 다른 중금속들은 거의 입자 상태로 변환되기 때문에 전기 집진기 등과 같은 일반적인 입자 제어시설에서 98%이상이 제거되지만, 증기압이 매우 높은 수은은 다단계 습식 스크러버, 활성탄을 사용하는 전기집진기/습식 스크러버가 결합된 특정한 방지시설에 없는 한 거의 대부분이 그대로 배출된다. (중략)

  • PDF

Applications of Pulse Energization Electrostatic Precipitator for the Removal of High Resistivity Dust (고비저항 먼지 처리를 위한 펄스형 전기 집진기의 적용)

  • 정재우;이용환;조무현;오종석;박정호
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 2001.11a
    • /
    • pp.149-150
    • /
    • 2001
  • 산업공정에서 배출되는 입자상 오염물질은 인체 및 환경에 미치는 영향이 직접적이고 가시공해의 주된 원인이 되므로 인관 주민의 민원을 유발시키는 등 주요 지역현안 문제의 원인이 되고 있다. 먼지를 제거하기 위한 대표적인 기술로는 전기집진기, 여과집진기, 사이클론, 습식집진기를 들 수 있으며, 대규모 산업공정에서는 정전기적 힘에 의해 집진하는 전기집진기가 일반적으로 적용되고 있다. 전기집진기는 비교적 높은 효율의 집진 성능을 보장하나 전력소모량이 비교적 많으며 미세먼지, 특히 고비저항을 가진 먼지의 제거효율이 낮다는 단점을 가지고 있다. (중략)

  • PDF

Study on Wet Electric Precipitation with Electrospray for Removal of PM1.0 in Exhaust Gas (배가스 내 PM1.0 미세먼지 제거를 위한 정전분무 습식 전기집진기에 대한 연구)

  • Cho, Yeonjoo;Lim, Hyunjeong;Kim, Soyeon;Choi, Sangmi;Jeong, Min Kyu;Kim, Minsung
    • Plant Journal
    • /
    • v.16 no.1
    • /
    • pp.34-37
    • /
    • 2020
  • The need to improve the performance of the dust collector by increasing the fine dust pollution in Korea is eminent. In this study, electrostatic spray wet electrostatic precipitator is used to remove Particulate Matter (PM). In order to enter the Cone-jet mode, which is the most stable spray mode among the various modes of electrostatic spraying, an appropriate voltage-flow condition must be satisfied, and a voltage-flow interval enabling this can be expressed as Stability Island. The voltage at which the conduit mode starts in the Stability Island section is referred to as the electrostatic spray minimum voltage (Onset Voltage). However, the conventional electrostatic spray is uses a very low flowrate, at most few millilitres per minute. The use of much higher flowrates has introduced different patterns of electrospray modes. In this study, the different spray modes will be studied in detail.

축류식 가이드 베인 구조 -반건식 세정기

  • 한국환경기술인연합회
    • Environmental engineer
    • /
    • s.121
    • /
    • pp.46-49
    • /
    • 1996
  • 반건식 세정기는 기존습식처리 설비의 단점인 폐수 및 백연의 발생, 설비의 내구성 저하 등을 보완한 유해가스 처리설비로 탁월한 가스 및 중금속 제거효율, 백연 및 폐수의 발생이 전무하며, 반응생성물의 분리제거로 후단집진설비의 부하를 최대한 줄 일 수 있는 21세기 첨단 유해가스 제거기술의 결정체이다.

  • PDF

The Design Conditions and the Initial Operation Results of 1 Ton/Day Class Dry Feeding Coal-Gasification System (건식 석탄공급형 1 Ton/Day급 가스화시스템 설계조건 및 시운전결과)

  • Seo, Hai-Kyung;Chung, Jae-Hwa;Ju, Ji-Sun
    • Transactions of the Korean hydrogen and new energy society
    • /
    • v.20 no.4
    • /
    • pp.352-359
    • /
    • 2009
  • KEPRI is developing a Korean type coal-gasification system and the scale is 20 ton/day. Prior to this pilot plant, a 1 ton/day class gasification system will be used for pre-testing of several coal types. This paper introduces the configuration and design conditions of this 1 ton/day class system, presenting the gas/coal ratio, oxygen/coal ratio, cold gas efficiency, CFD analysis of gasifier, and others. The existing combustion furnace for residual oil was retrofitted as a coal gasifier and a vertical and down-flow type burner was manufactured. Ash removal is carried out through a water quencher and a scrubber following the quencher, and the sulfur is removed by adsorption in the activated carbon tower. The gas produced from the gasifier is burned at the flare stack. In this paper, the results of design conditions and initial operation conditions of I ton/day gasification system are compared together.