• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.3
• /
• pp.411-411
• /
• 2000

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.3
• /
• pp.440-447
• /
• 2000

The effects of DP finishing conditions including process technique and finishing agent on the mechanical properties and hand of cotton fabrics were investigated. 100% cotton fabrics were treated with NMA/DMDHEU and NMA/YF using wet-fixation and steam-fixation process. For comparison, conventional pad-dry-cure process was used with DMDHEU. After DP finishing, tensile and compressional resilience increased and bending hysteresis decreased, resulting in the improvement of dimensional stability of cotton fabric. WF and SF process rendered fabrics better shear properties, tensile energy, and compressional linearity and energy than PDC process. However, SF process produced fabrics with higher geometrical roughness than WF process. After DP finishing, primary hand values except Koshi increased, resulting in the increase of total hand value of cotton fabric.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.4
• /
• pp.330-336
• /
• 2017

This study performs a root cause analysis of the sticking that occurs in the hydraulically actuated wet type multi-disc friction clutch in a ship's diesel engine propulsion system that uses rubber elastic coupling. The fishbone method was used to study the sticking through dismantling investigation of the reduction gear and clutch, investigation of the components, and onboard system tests including nondestructive testing. The friction plate sticking is caused by the slip due to friction heat resulting from the leakage of control oil through cracks in the assembled hollow shaft. The friction plate cooling oil also leaks simultaneously through the crack, and partial sticking occurs due to the hot spots in the friction plates. These are caused by insufficient amount of cooling oil due to oil leakage.

• Journal of the Korean Society of Radiology
• /
• v.12 no.3
• /
• pp.305-312
• /
• 2018

A dry and wet wipe test for radioisotope leakage checking was conducted by fixing the radioisotope $^{14}C$ to the glass surface and used for observing the transfer factor and surface shape of the test paper through wipe test. The dry wipe test showed that transfer factor in the tissue paper was twice as high as in the paper filter, and the wet wipe test showed that transfer factor in the paper filter paper was three times higher than the tissue paper. Although paper filters are general choice for leakage checking, it has been shown that tissue paper can be an alternative in the dry wipe test.

• 보존과학연구
• /
• s.37
• /
• pp.43-51
• /
• 2016

A wooden rice chest in National Museum of Korean Contemporary History was colored by black lacquer but it was degraded and fallen apart partially. The condition of the paint of front and left sides were relatively fine, but the coat of the top, back and right sides were exfoliated. The legs at the bottom of the chest were severly degraded and turned whitish. After condition checking flakes and deterioration of film, the conservation treatment was undertaken with cleaning surface. Wet cleaning was conducted that area had lots of dust area. Apply watery animal glue to degraded lacquer layers. The legs were exfoliated a lot, so applied watery animal glue several times. Other side of rice chest except Gaepan, that was not felt sense of difference, colored centrally Gaepan.

• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.1
• /
• pp.39-47
• /
• 2007

It is investigated how KOH and Rthylenediamine(EDA) treatment conditions on Polyimide film surface affect the interfacial fracture energy between electroless plated Ni and Polyimide film by $180^{\circ}$ peel test. Estimated values of interfacial fracture energy were 24.5 g/mm and 33.3 g/mm for the KOH treatment times under 1 and 5 minutes, respectively, while, those were 31.6 g/mm and 22.3 g/mm for EDA treatment times under 1 and 5 minutes, respectively. Interfacial bonding between electroless plated Ni and Polyimide seems to be dominated by chemical bonding effect rather than mechanical interlocking effect. It is found that chemical treatment produces carboxyl and mine functional groups which are closely related the interfacial bonding mechanism. Finally, it is speculated that interfacial fracture energy seems to be controlled by O=C-O bonding near cohesive failure region.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.83-83
• /
• 2011

나노섬유는 마이크로 섬유에 비해 $10^3$배 정도의 넓은 표면적을 가지며, 다른 섬유와 비교하여 유연성, 투습성과 같은 특성이 우수하다. 나노섬유의 제조방법은 여러 가지가 있으나, 상용화의 가능성, 적용 고분자의 다양성, 제조공정의 단순성, 다양한 제품기술에의 응용성 등을 고려하여 선택하여야 한다. 나노섬유의 제조기술은 방법에 따라 전기방사, 복합방사, 멜트블로운 공정, 에어레이드 공정, 습식 공정 등으로 나눌 수 있다. 전기방사 등 나노섬유를 대량생산하여 상용화하려는 노력을 지속적으로 하고 있으나 나노섬유의 염색가공에 관련되어 기술적 한계로 제품전개에 많은 어려움을 겪고 있다. 그리하여 본 연구에서는 나노섬유 단독으로 제품화하기에는 강도 등의 문제로 PET에 워터펀칭한 복합소재로 개발하여 900nm 이하의 나노섬유에 대한 최적의 날염조건과 현장적용 생산기술을 개발하고자 하였다. 나노섬유 복합소재에 대하여 Brown, Red, Blue, Black 색상의 안료와 Urethane, Rubber, Acrylic, Eco Binder를 사용하여 날염 실험하였으며, 최적의 조건으로 현장생산에 적용하여 생산하였다. 안료의 고착성을 높여 날염성과 염색견뢰도를 증진시키기 위하여 원적외선 열처리기를 개발하여 현장생산에 접목시켰다. 원적외선 열처리기는 벙커C유 또는 가스 등을 사용하는 텐터나 증열기와는 다르게 전기를 에너지원으로 하여 원적외선 램프를 이용한 건열시스템의 형태로 저공해 및 그린 형태의 열처리기 시스템으로, 섬유에 대한 원적외선의 조사거리, 원적외선 램프의 간격, 적용 온도, 원단이송 속도 등에 따른 최적의 원적외선 열처리기 날염조건을 설정하였다. 바인더에 따른 날염성은 우레탄계 바인더를 사용하였을 경우에 가장 선명하고 깊은 색상을 보였으며, 아크릴계 바인더의 경우가 가장 낮은 색상을 보였으며 염색견뢰도는 대체적으로 양호한 결과를 얻었다. 그리고, 최근 환경적인 추세에 맞추어 에코 바인더를 사용하여 날염한 결과 염색성과 내구성 등은 우레탄계와 아크릴계 바인더의 중간 정도의 결과를 보였다.

• Journal of Sensor Science and Technology
• /
• v.7 no.1
• /
• pp.73-82
• /
• 1998

In silicon surface micro-machining, the newly developed GPE(gas-phase etching) process was verified as a very effective method for the release of highly compliant micro-structures. The developed GPE system with anhydrous HF gas and $CH_{3}OH$ vapor was characterized and the selective etching properties of sacrificial layers to release silicon micro-structures were discussed. P-doped polysilicon and SOI(silicon on insulator) substrate were used as a structural layer and TEOS(tetraethyorthdsilicate) oxide, thermal oxide and LTO(low temperature oxide) as a sacrificial layer. Compared with conventional wet-release, we successfully fabricated micro-structures with virtually no process-induced striction and residual product.

• Journal of Conservation Science
• /
• v.29 no.4
• /
• pp.321-332
• /
• 2013

Namwon Singyeri Maaeyeoraejwasang (Rock-Carved Seated Buddha Statue) is composed mainly foliated granite and is different metamorphic grade and weathering degree on rock location. As the results of deterioration evaluation, upper part of the buddha statue was estimated that granularity decomposition was serious and rock strength was lower than lower part. Furthermore organism assessed most effect of among weathering factors. Chl. a amount of organism species were calculated $0.2{\mu}g/cm^2$ of crustaceous lichen, $1.1{\mu}g/cm^2$ of foliose lichen, $2.3{\mu}g/cm^2$ of bryophyte. Organism was taken treatment in order of amount of Chl. a and pre-cleaning, dry cleaning, wet cleaning in sequence. It should be establish conservation plan that strengthening in consideration of lithology characteristics and setting in good condition environment to conserve long-term of Maaeyeoraejwasang.

• 보존과학연구
• /
• s.32
• /
• pp.99-112
• /
• 2011

The three-storied stone pagoda located in Seungansaji temple site consists mainly of medium to fine-grained biotite granite and granitic gneiss, and partly macrocrystalline gneiss, muscovite gneiss and gabbro. The surface of the stone pagoda is extensively colonized by lichen and moss due to surrounding trees and lawns, and severly deteriorated. Therefore, a comprehensive deterioration diagnosis has been carried out and conservation treatment was conducted in this study. For the conservation treatment, dry cleaning is performed throughout all the surface of the pagoda for naturally grown lichen and biological contaminants using a soft brush and wooden knife. Crustose lichen strongly adhere to the surface was removed by wet cleaning using distilled water. Also, protective railings were reinstalled to an appropriate height with taking the distance from the stone pagoda into account. Finally, the ground around the stone pagoda was repaired with clay sand, and dike was installed with a natural gradient to facilitate water drainage.