• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1999.11a
• /
• pp.162-166
• /
• 1999

30-40대 중년 여성 100명을 대상으로 Brassiere착용 상황, 요구사항을 조사, 분석하고 시판 Brassiere의 착용실험을 통해 착용감을 평가함으로써 Brassiere에 대한 소비자 요구와 착용감 평가차원을 추출하였다. 주관적 착용감 평가실험은 25명이 참여 하였으며, 실험은 온도 28$^{\circ}C$, 습도 65%RH의 인공기후실에서 실시하였다. Brassiere 착용감의 구성차원을 추출하기 위해 평가용어를 이용하여 평정한 값들을 요인분석한 결과, fit성 및 체형보정성, 심미성, 압박감, 동작에 의한 브라의 착용위치 변화의 4가지 요인으로 이루어졌음을 확인하였다. Brassiere 착용감을 예측하기 위해 평가용어를 회귀변수로 하여 회귀분석한 결과, Y=3.262+0.723X$_1$-0.646X$_2$ (Y: 착용감, X$_1$: 가슴과 컵모양이 잘 맞는다, X$_2$: 와이어 부분이 불편하다)로 나타났다. Brassiere 착용감에 대한 소비자의 정성적인 요구사항을 정량적으로 측정하기 위한 제품 디자인 요소중, 와이어와 주소재의 신축성이 착용감에 중요하게 작용하는 것으로 나타났다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.948-948
• /
• 2012

합천댐유역에 대한 기후변화에 따른 수문학적 영향을 정량적으로 분석하기 위해, 기상청에서 제공하는 공간해상도 27km의 MM5 RCM(Regional Climate Model)을 사용하였다. RCM의 기상변수들은 공간적 스케일의 상이성과 RCM 기후변수들의 불확실성 때문에 유출모형인 SWAT의 입력자료로 사용하기에는 어려움이 있다. 특히, RCM 변수들 중 강수량의 경우 한반도 지역의 6월과 10월 사이에 연강수량의 67%이상이 집중되는 계절성을 반영하지 못하고 있는 실정이기 때문에 국내 유역의 유출량 산정에 사용하기 위해서는 지역적 상세화(Downscaling)가 필요하다. 본 연구에서는 RCM 기후변수에 내포된 공간적 스케일의 상이성과 불확실성을 최소화하기 위해 강우관측소 지점을 단위로 한 다지점 인공신경망 기법을 적용하여 강수량, 습도, 최고기온 및 최저기온에 대한 상세화를 실시하였다. 강수의 경우 여름철 태풍사상을 모의하기 위한 Stochastic Typhoon Simulation기법과 Baseline(1991~2010)과 Projection(2011~2100) 사이의 강수량 보정을 위한 Dynamic Quantile Mapping 기법을 적용하여, 강수량의 불확실성을 최소화 하고자 하였다. 상세화된 기후자료를 이용한 SWAT 모형의 일(Daily) 단위 강우-유출 모의결과를 2011~2040년, 2041~2070년, 2071~2100년으로 구분하여 추세분석을 실시하였다.

• Journal of Sensor Science and Technology
• /
• v.30 no.4
• /
• pp.243-249
• /
• 2021

Humidity is an important physical quantity that is closely related with the quality of everyday life as well as the quality control of products in various industries. Here, we have developed a divided-flow type humidity generator of which humidity generation is faster than the saturator-based humidity generator in ppm level. The operation principle of the divided-flow humidity generator is first introduced. Then, the performance of the divided-flow humidity generator is verified by testing the radiosonde humidity sensor at low temperature. As a result, the humidity generated from the divided-flow humidity generator is consistent with the saturator-based precision humidity generator within 1.6% relative humidity in the range from 10% to 40% at -45 ℃. It is also found that the radiosonde humidity sensor shows measurement errors by 3% - 5% at -45 ℃ when it is only calibrated at room temperature. The response times of radiosonde humidity sensor using the divided-flow humidity generator are between about 2 and 9 minutes, whereas those by the saturator-based humidity generator are about 20 minutes. In this regard, the divided-flow humidity generator has a merit in terms of fast humidity changes for the calibration of radiosonde humidity sensors at low-temperatures.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.21 no.4
• /
• pp.238-249
• /
• 2019

The evapotranspiration is estimated based on weather factors such as temperature, wind speed and humidity, and the Hargreaves equation is a simple equation for calculating evapotranspiration using temperature data. However, the Hargreaves equation tends to be underestimated in areas with wind speeds above 3 m s^-1 and overestimated in areas with high relative humidity. The study was conducted to determine Hargreaves equation coefficient in 82 regions in Korea by comparing evapotranspiration determined by modified Hargreaves equation and the Penman-Monteith equation for the time period of 2008~2018. The modified Hargreaves coefficients for 50 inland areas were estimated to be 0.00173~0.00232(average 0.00196), which is similar to or lower than the default value 0.0023. On the other hand, there are 32 coastal areas, and the modified coefficients ranged from 0.00185 to 0.00303(average 0.00234). The east coastal area was estimated to be similar to or higher than the default value, while the west and south coastal areas showed large deviations by area. As results of estimating the evapotranspiration by the modified Hargreaves coefficient, root mean square error(RMSE) is reduced from 0.634~1.394(average 0.857) to 0.466~1.328(average 0.701), and Nash-Sutcliffe Coefficient(NSC) increased from -0.159~0.837(average 0.647) to -0.053~0.910(average 0.755) compared with original Hargreaves equation. Therefore, we confirmed that the Hargreaves equation can be overestimated or underestimated compared to the Penman-Monteith equation, and expected that it will be able to calculate the high accuracy evapotranspiration using the modified Hargreaves equation. This study will contribute to water resources planning, irrigation schedule, and environmental management.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.5 no.2
• /
• pp.141-145
• /
• 2000

The daily fluctuations of occurrence rate and standing stock of zooplankton, the relationship between dry and wet weights of gelatinous zooplankton, and the size distributions of body length and body weight of zooplankton were investigated in the sea around Cheju Island from September 1996 to August 1997. Mean ratios of wet to dry weights were 66.46 (raging from 47.05 to 84.64) in the gelatinous zooplankton and 10.89 (raging 9.21 to 14.85) in the non-gelatinous zooplankton which consisted of crustaceans such as copepods, decapods, mysids, and ostracods etc. Rarios of gelatinous zooplankton to non-gelatinous zooplankton (G/NG) in wet weight was 0.99 (0.28-2.30), indicating high occurrence rate of gelatinous in the study area. The seasonal and diel fluctuations of the gelatinous zooplankton were very large, and G/NG ratios greatly varied with seasons and dat/night cycles. The size distributions of body length of zooplankton (250-500 urn: 35.5% in maximum), and wet (0.1-0.2 mg: 34.4%) and dry weights (0.025-0.05 mg: 44.8%) showed much difference depending composition of the zooplankton groups. These results show that quantitative estimations of zooplankton produc- tivity only based on wet weight should be corrected to better understand and evaluate marine resources in Korean waters.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.5
• /
• pp.23-34
• /
• 2004

In this paper we propose a feature point tracking algorithm using optical flow under non-prior taming active feature model (NPT-AFM). The proposed algorithm mainly focuses on analysis non-rigid objects[1], and provides real-time, robust tracking by NPT-AFM. NPT-AFM algorithm can be divided into two steps: (i) localization of an object-of-interest and (ii) prediction and correction of the object position by utilizing the inter-frame information. The localization step was realized by using a modified Shi-Tomasi's feature tracking algoriam[2] after motion-based segmentation. In the prediction-correction step, given feature points are continuously tracked by using optical flow method[3] and if a feature point cannot be properly tracked, temporal and spatial prediction schemes can be employed for that point until it becomes uncovered again. Feature points inside an object are estimated instead of its shape boundary, and are updated an element of the training set for AFH Experimental results, show that the proposed NPT-AFM-based algerian can robustly track non-rigid objects in real-time.

• Progress in Medical Physics
• /
• v.19 no.1
• /
• pp.49-55
• /
• 2008

This study aims to conduct the comparative analysis of the radiation dose according to before and after the calibration of the ionization chamber used for measuring radiation dose in the MDCT, as well as of $CTDI_w$ according to temperature and pressure correction factors in the CT room. A comparative analysis was conducted based on the measured MDCT (GE light speed plus 4 slice, USA) data using head and body CT dosimetric phantom, and Model 2026C electrometer (RADICAL 2026C, USA) calibrated on March 21, 2007. As a result, the $CTDI_w$ value which reflected calibration factors, as well as correction factors of temperature and pressure, was found to be the range of $0.479{\sim}3.162mGy$ in effective radiation dose than the uncorrected values. Also, under the routine abdomen routine CT image acquisition conditions used in reference hospitals, patient effective dose was measured to indicate the difference of the maximum of 0.7 mSv between before and after the application of such factors. These results imply that the calibration of the ion chamber, and the correction of temperature and pressure of the CT room are crucial in measuring and calculating patient effective dose. Thus, to measure patient radiation dose accurately, the detailed information should be made available regarding not only the temperature and pressure of the CT room, but also the humidity and recombination factor, characteristics of X-ray beam quality, exposure conditions, scan region, and so forth.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.2 no.3
• /
• pp.75-79
• /
• 2000

Calibrations of fast-response krypton hygrometers were carried out using a dew-point hygrometer to investigate the changes in their absorption coefficients due to long-term field operation. Absorption coefficients changed proportionally with the number of hours of field operation. The increase in absorption coefficient indicates that the water vapor flux, calculated with the original absorption coefficient, would underestimate the true flux in the field. To minimize the uncertainty in quantifying evapotranspiration and surface energy budget studies, frequent calibrations (for example, every 1500 hours of field operation) of krypton hygrometer are recommended.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.10a
• /
• pp.36-36
• /
• 1998

상대 습도가 높은 다습 환경이나 강우 또는 강설 환경하에서 기체의 비행 성능을 평가하기 위해서는, 이러한 환경하에서 수분 유입으로 인한 제트 엔진의 성능변화를 고려하여야 한다. 수분 유입으로 인한 제트 엔진의 성능 변화는 주로 수분 함유량에 따른 자동 유체의 물성치 변화에 기인하는 것으로, 본 연구에서는 다양한 형태의 수분 유입이 압축기, 연소기, 터어빈 및 배기 노즐과 같은 엔진 구성품의 공력 성능에 미치는 영향을 정량적으로 고찰하고 이를 종합하므로써 제트 엔진이 겪는 공력 성능의 변화를 예측하였다. 예측 결과를 기존의 해석 및 시험 결과와 비교하므로써 그 신뢰도를 검증하였으며, 이로써 제트 엔진의 운용 환경과 관련된 고 비용의 시험 또는 시험에 근거한 성능 보정을 대체할 수 있다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.5
• /
• pp.541-546
• /
• 2024

Climate conditions, especially transport and storage, are a very important factor in the process of sampling and testing insulation oil in the field. The samples of insulating oil exposed to the atmosphere affect the dielectric strength, total acid number and moisture test value by oxygen and high humidity environment and may also affect the results according to the criteria specified in each test. Therefore, reliable test values for insulating oil testing require consideration of the atmospheric environment of the test site, including oxygen and humidity. In this paper, each test was conducted on insulating oil exposed to various time and humidity environments, and the effect of the atmospheric environment on the test results was analyzed by comparing and analyzing with the first insulating oil.