• 제목/요약/키워드: 슬루율

검색결과 5건 처리시간 0.02초

낮은 전자기 간섭 특성을 가진 차내 통신을 위한 데이터 송신기 설계 (Design of a Low EMI Data Transmitter for In-Vehicle Communications)

  • 박준영;전현규;이원영
    • 한국전자통신학회논문지
    • /
    • 제18권4호
    • /
    • pp.571-578
    • /
    • 2023
  • 본 논문에서는 차내 통신을 위한 데이터 송신기에 지연고정루프를 접목한 회로를 제안한다. 낮은 전자기 간섭 특성을 가진 송신기의 설계를 위해 낮은 슬루율을 가지며, 회로 소자의 공정에 따른 변화로 인한 슬루율 변화량을 보정할 수 있는 지연고정루프를 적용하였다. 시뮬레이션 결과에 의하면, 지연고정루프가 적용된 송신기는 기존의 송신기보다 낮은 슬루율 변화량을 가진다. 제안한 구조의 회로는 65nm 공정으로 설계되었으며, 데이터 전송속도는 20Mbps, 공급전압은 1.1V이다. 지연고정루프가 있는 송신기는 기존의 송신기에 대비하여 빠른 조건에서 53.6% 낮은 슬루율 변화량, 느린 조건에서 13.07% 낮은 슬루율 변화량을 가진다.

광대역 하이브리드 직교 폴라 송신 플랫폼 구현에 관한 연구 (A Study on the Implementation of Wideband Hybrid Quadrature Polar Transmitter Platform)

  • 장상현;이일규;김형중;강상기
    • 한국통신학회논문지
    • /
    • 제36권1A호
    • /
    • pp.28-34
    • /
    • 2011
  • 본 논문에서는 소출력 우선 통신 기기(SRD : Short Range Device)에 적용 기능한 광대역 하이브리드 직교 폴라 송신(Wideband Hybrid Quadrature Polar transmitter) 구조를 제시하였다. 먼저 시스템 성능 분석을 위한 시뮬레이션 환경을 구축한 후 송신기 성능 파라미터들에 의한 성능 열화 분석을 실시하였다. 주요 성능 열화 요인으로 VVA(Voltage Variable Attenuator)의 슬루율(Slewrate), 크기 및 위상 신호의 시간 지연 그리고 DAC(Digital-to-Analog Converter) 비트수를 고려하였으며, 성능 열화 분석 시뮬레이션을 통해서 송신기 요구 규격을 만족하는 최소 요구 파라미터 값을 확인하였다. 또한 성능 분석 결과를 바탕으로 광대역 하이브리드 직교 폴라 송신기 플랫폼을 구현하였고 3GPP 표준 규격을 참조하여 송신기 성능 측정 및 분석을 실시하였으며 그 결과를 확인하였다.

병렬전류감산기를 이용한 슬루율 가변 연산증폭기 설계 (Design of a CMOS Programmable Slew Rate Operational Amplifier with a Switched Parallel Current Subtraction Circuit)

  • 신종민;윤광섭
    • 전자공학회논문지B
    • /
    • 제32B권5호
    • /
    • pp.730-736
    • /
    • 1995
  • This paper presents the design of a CMOS programmable slew rate operational amplifier based upon a newly proposed concept, that is a switched parallel current subtraction circuit with adaptive biasing technique. By utilizing the newly designed circuit, it was proven that slew rate was linearly controlled and power dissipation was optimized. If the programmable slew rate amplifier is employed into mixed signal system, it can furnish the convenience of timing control and optimized power dissipation. Simulated data showed the slew rate ranging from 5. 83V/$\mu$s to 41.4V/$\mu$s, power dissipation ranging from 1.13mW to 4.1mW, and the other circuit performance parameters were proven to be comparable with those of a conventional operational amplifier.

  • PDF

유압서보밸브의 인-프로세스 성능 진단에 관한 연구 I - 유압실린더 위치제어계의 경우 - (A Study on In-Process Performance Diagnosis of Hydraulic Servovalves - First Report : Position Control System -)

  • 김성동;김경호;송재수;함영복;이재천
    • 유공압시스템학회논문집
    • /
    • 제3권1호
    • /
    • pp.7-14
    • /
    • 2006
  • In this paper, an in-process diagnosis method for performance of position control servo system was studied, which was based upon null bias, slew-rate ratio and delay time measurement. Slew-rate ratio and delay time were analyzed by theoretical analysis, computer simulation and experiment. As a result of these analysis, when spool of servovalve was weared, slew-rate ratio was decreased and delay time was increased.

  • PDF

전력선 통신에서 오버 샘플링과 Slew Rate 제한을 이용한 임펄스 잡음 제거 기법 (Mitigation of Impulse Noise Using Slew Rate Limiter in Oversampled Signal for Power Line Communication)

  • 오우진;나타라잔 발라
    • 한국정보통신학회논문지
    • /
    • 제23권4호
    • /
    • pp.431-437
    • /
    • 2019
  • 전력선 통신(PLC: Power Line Communication)은 저비용으로 고속 전송이 가능하여 스마트 그리드와 연계하여 다양하게 활용되고 있다. 그러나 전력선 채널은 임펄스 잡음으로 인하여 많은 문제가 있어 이를 해결하기 위하여 다양한 연구가 진행되어 왔다. 최근에는 아날로그 신호에 대한 비선형 필터에 적응형 clippling을 사용하는 ACDL(Adaptive Cannonical Differential Limiter)이 제안되었다. 본 논문에서는 이의 특성을 분석하고 간략화하여 오버샘플링된 디지털신호에 대해 slew rate를 검출하는 방안과 유사함을 보였다. 제안된 방식은 모의 실험으로 PRIME 표준에서 성능을 검증하여 ACDL과 동일 수준 이상의 성능을 가지면서도 훨씬 간단히 구현이 가능한 장점을 확인하였다. BER 성능은 동등하면서도 복잡도는 10%이하로 줄어든다.