• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.8
• /
• pp.684-692
• /
• 2016

In this paper, a non-offset longitudinal shunt slot excited by an asymmetry compound iris on the broad wall of a rectangular waveguide is presented as an element for a waveguide slot-array antenna(WSAA). By properly adjusting the iris dimension, a resonance of the slot at a desired frequency can be achieved. The proposed resonant slot has some advantageous properties, such as a wide range of normalized resonant conductance, and minimum change of phase in the waveguide at the resonance. In addition, when the slots are arrayed for a waveguide slot antenna, the unwanted cross-polarization level can be reduced because each slot is placed in a straight line. A $8{\times}1$ WSAA with -20 dB side-lobe level(SLL) is designed, fabricated, and tested experimentally. The measured results are well agreed with the simulated ones and have an SLL of -18.13 dB and a cross-polarization level of -48.85 dB at 9.41 GHz, which was improved by about 15 dB of that of the conventional longitudinal slot array antenna.

• Proceedings of the KIEE Conference
• /
• 2003.10b
• /
• pp.131-133
• /
• 2003

일반적인 BLDCM은 슬롯을 갖고 있기 때문에 코깅 토크가 발생하며, 이로 인하여 토크 리플이 증가한다. 이러한 슬롯을 제거한 슬롯리스 BLDCM은 원인적으로 코깅이 존재하지 않으며, 슬롯의 제거로 인하여 이 부분에서의 철손도 발생하지 않게 된다. 따라서, 우수한 효율과 코깅이 없음으로 인하여, 이러한 특성이 요구되는 특수 분야 뿐 아니라, 일반적인 분야에서도 수요가 기대되는 바이다. 본 연구에서는 슬롯리스형 BLDCM에 대하여 일반 BLDCM과 비교되는 특성을 해석하여 성능의 우수성을 보인다.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.19-21
• /
• 2003

일반적으로 PMDC모터에 사용되는 자석은 가격과 재질에 따라서 여러 가지로 분류할 수 있다. 그러나 착자방법에는 등방향과 방사형 착자로 나눌 수 있고 용도에 따라서 다극으로 착자할 수 있다. 하지만 그 기본적인 구조에는 원통형, 판형, 육면체형으로 분류할 수 있는데 구형, 반구형 또는 구형 shell에 관한한 아직까지 소개된 문헌이 빈약하다. 본 논문에서는 슬롯리스 구형직류모터에 사용될 반구형 shell형태의 영구자석의 착자기 구조와 착자방법에 대한 가능성을 찾아보고 이론적으로 증명하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.812_813
• /
• 2009

본 논문에서 로프리스 엘리베이터용 영구자석형(PM) 선형동기전동기(LSM)의 디텐트력을 저감하기 위하여 반응표면법(RSM)을 이용한 디텐트력의 최소화 설계 방법을 제안하였다. RSM을 이용하여 정수 슬롯형과 분수 슬롯형 PM-LSM의 설계변수를 추론하고 유한요소법(FEM)으로 디텐트력을 구하였다. 반응표면법과 유한요소법의 해석결과를 토대로 분수 슬롯형 PM-LSM이 주어진 체적의 엘리베이터 시스템에 적합한 형상임을 입증한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.6
• /
• pp.586-594
• /
• 2013

This paper proposes a new coupling element of microwave slot coupler for designing waveguide slot array which can reduce the effect of undesired higher order mode coupling between coupling and radiating slots in the branch waveguide. The proposed device is composed of a centered longitudinal shunt-series coupling slot at the center of broad wall shared by two crossed rectangular waveguides and an asymmetric compound iris that excites the coupling slot. We first have obtained scattering parameters for the proposed coupler by use of EM S/W tool HFSS and then extracted the parameters of T- network equivalent circuit for the coupling slot. We also have analyzed the resonant properties such as resonant length and normalized admittance by changing the geometrical dimensions. The measured results for the fabricated coupler with short-circuited block ${\lambda}_g/4$ away from the coupling slot are well agreed with the simulated ones.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.1271-1272
• /
• 2013

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.3
• /
• pp.107-114
• /
• 2001

Electro-mechanical battery (EMB) consists of a high-speed fly wheel with an integral motor/ generator suspended on magnetic bearings and in an evacuated housing. Permanent magnet (PM) machines as the EMB motor/ generator are a popular choice, since there are no excitation losses which means substantial increase in the efficiency. In this paper we present the comparison of conventional slotted and slotless ring-wound types, aimed at EMB and other high-speed drives. We firstly discuss the topology of each machine for this particular application. these machines are primarily designed as 1kW two-pole PM generator with the rated speed of 40000 rpm. the motoring torque of 0.51 Nm has to be enough to accelerate the flywheel to the rated speed. We then present the comparison of the open-circuit field, the armature reaction field and winding inductance. next we analyze the induced voltage and the developed torque per unit stack length and unit weight of different machines. Finally, we estimate and compare the losses and the efficiency at motoring and generating modes.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.59-60
• /
• 2018

In this paper, we studied a design method for a band-pass waveguide filter with a modified H-type resonant iris (RI) placed in a thin transverse wall of a rectangular waveguide. The horizontal straight gap at the center of a conventional H-shaped iris is modified to a U-shaped one to increase the equivalent capacitance, and the equivalent inductance is improved by changing the vertical two straight slots into C-shaped ones. A third-order band pass filter using the proposed modified H-shaped iris was designed and, it was observed that the filter operated in the frequency range of 9.22-9.75 GHz with its insertion loss of 0.5 dB and return loss of 17 dB.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.873-875
• /
• 2000

The self- and mutual- winding inductances can have an important influence on both the steady-state and transient dynamic performance of a machine. Especially, slotless topologics have inherently low self- and mutual-stator winding inductance. Thus, this paper describes an analytical model for predicting the winding inductance and results are compared to finite element analyses.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.650-652
• /
• 2000

Proposed slotless PM machine is constructed without stator winding slots. Its stator magnetic material is in the form of a ring and winding have a toroidal configuration and its rotor consists of a 4-pole Halbach array or radially magnetized PM rotor. Thus, airgap flux density distribution and induced emf waveform are essentially sinusoidal. Open circuit magnetic fields and developed torque of each type are presented from the analytical method and finite element method.