• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.2
• /
• pp.413-418
• /
• 2011

The thermodynamic properties of steam table are obtained by measurement or approximate calculation under appropriate assumptions. Therefore they are supposed to have basic measurement errors. And thermodynamic properties should be modeled through function approximation for using in numerical analysis. In order to make noised thermodynamic properties corresponding to measurement errors, random numbers are generated, adjusted to appropriate magnitudes and added to original thermodynamic properties. Both neural networks and quadratic spline interpolation method are introduced for function approximation of these modified thermodynamic properties in the saturated water based on pressure and temperature. In analysis spline interpolation method gives much less relative errors than neural networks at both ends of data. Excluding the both ends of data, the relative errors of neural networks is generally within ${\pm}0.2%$ and those of spline interpolation method within ${\pm}0.5$~1.5%. This means that the neural networks give smaller relative errors compared with quadratic spline interpolation method within range of use. From this fact it was confirmed that the neural networks trace the original values better than the quadratic interpolation method and neural networks are more appropriate method in modelling the saturated steam table.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.3
• /
• pp.195-201
• /
• 2016

Eddy current testing (ECT) is commonly applied for the inspection of automated production lines of metallic products, because it has a high inspection speed and a reasonable price. When ECT is applied for the inspection of a metallic object having an uneven target surface, such as the spline gear of a spline shaft, it is difficult to distinguish between the original signal obtained from the sensor and the signal generated by a defect because of the relatively large surface signals having similar frequency distributions. To facilitate the detection of defect signals from the spline gear, implementation of high-order filters is essential, so that the fault signals can be distinguished from the surrounding noise signals, and simultaneously, the pass-band of the filter can be adjusted according to the status of each production line and the object to be inspected. We will examine the infinite impulse filters (IIR filters) available for implementing an advanced filter for ECT, and attempt to detect the flaw signals through optimization of system design parameters for detecting the signals at the system level.

• Journal of the Korean Data and Information Science Society
• /
• v.19 no.4
• /
• pp.1047-1058
• /
• 2008

Prediction of total sales in information security industry is considered. Exponential smoothing and spline smoothing is applied to the time series of annual sales data. Due to the different survey items of every year, we recollect the original survey data by some basic criterion and predict the sales to 2014. We show the total sales in infonnation security industry are increasing gradually by year.

• Journal of KIISE:Databases
• /
• v.31 no.5
• /
• pp.479-491
• /
• 2004

Location information of mobile objects is applied to vehicle tracking, digital battlefields, location based services, and telematics. Their location coordinates are periodically measured and stored in the application systems. The linear function is mainly used to estimate the location information that is not in the system at the query time point. However, a new method is needed to improve uncertainties of the location representation, because the location estimation by linear function induces the estimation error. This paper proposes an application method of the cubic spline interpolation in order to reduce deviation of the location estimation by linear function. First, we define location information of the mobile object moving on the two-dimensional space. Next, we apply the cubic spline interpolation to location estimation of the proposed data model and describe algorithm of the estimation operation. Finally, the precision of this estimation operation model is experimented. The experimentation comes out more accurate results than the method by linear function, although the proposed location estimation function uses the small amount of information. The proposed method has an advantage that drops the cost of data storage space and communication for the management of location information of the mobile objects.

• Journal of Korea Multimedia Society
• /
• v.13 no.9
• /
• pp.1373-1381
• /
• 2010

Current flight maneuver diagram used by pilots is based on 2D spatial presentation, so it has limitation on display 3D flight information and hard to understand it instinctively. Flight animation authoring tools for this diagram are complex to use and lack useful features like non-linear editing of flight path and real-time interactivity on multiple aircrafts. This research focuses on 3D flight path generation method in the animation system for flight maneuver education. This research combines initial sketch input on 2D diagram with the thrust of an aircraft to generate 3D linear spline as close as to real flight. Using suggested linear spline creation method, the flight path can be visualized, edited, and animated in real-time at the flight maneuver briefing and debriefing.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.3
• /
• pp.239-245
• /
• 2008

A level set based topological shape optimization using extended B-spline basis functions is developed for steady-state heat conduction problems. The only inside of complicated domain identified by the level set functions is taken into account in computation, so we can remove the effects of domain outside parts in heat conduction problem. The solution of Hamilton-Jacobi equation leads to an optimal shape according to the normal velocity field determined from the sensitivity analysis, minimizing a thermal compliance while satisfying a volume constraint. To obtain exact shape sensitivity, the precise normal and curvature of geometry need to be determined using the level set and B-spline basis functions. Using topological derivative concept, the nucleation of holes for topological changes can be made whenever and wherever necessary during the optimization.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.2
• /
• pp.50-55
• /
• 2002

The standard approach of image resampling is to fit the original image with continuous model and resample the function at a desired rate. We used the B-spline function as the continuous model because it oscillates less than the others. The main purpose of this paper is the derivation of a nonuniform optimal resampling algorithm. To derive it, needing approximation can be computed in three steps: 1) determining the I-spline coefficients by matrix inverse process, 2) obtaining the transformed-spline coefficients by the optimal resampling algorithm derived from the orthogonal projection theorem, 3) converting of the result back into the signal domain by indirect B-spline transformation. With these methods, we can use B-spline in the non-uniform resampling, which is proved to be a good kernel in uniform resampling, and can also verify the applicability from our experiments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.11
• /
• pp.2008-2013
• /
• 2006

In numerical analysis on evaluating the thermal performance of the thermal equipment, numerical values of thermodynamic properties such as temperature, pressure, specific volume, enthalpy and entropy are required. But the steam table itself cannot be used without modelling. In this study applicability of neural networks in modelling the wide temperature range of wet saturated vapor region was examined. the multi-layer neural network consists of a input layer with 1 node, two hidden layers with 10 and 20 nodes respectively and a output layer with 6 nodes. Quadratic and cubic spline interpoations methods were also applied for comparison. Neural network model revealed similar percentage error to spline interpolation. From these results, it is confirmed that the neural networks could be powerful method in modelling the wide range of the steam table.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.08a
• /
• pp.193-196
• /
• 2000

최근 컴퓨터를 이용한 CAD 디자인 시스템이 날염디자인제도(textile printing design trace)에 널리 사용되고 있다 CAD를 이용한 날염디자인은 기존의 수작업에 비해 공정을 간편하게 하고, 상당히 많은 시간과 경비의 단축을 가능하게 하였다. 그러나 CAD를 이용한 날염디자인제도 역시 상당부분 숙련자들의 수작업을 요구하고 있다. 본 논문에서는 날염디자인제도에서의 컬러 분할 전처리 과정으로 원 이미지를 저주파 통과 필터링하고 컬러분할을 수행하였다. 이렇게 분할된 이미지의 윤곽선을 추출하고 스플라인(Spline)기법을 사용, 더 부드럽고 완만한 곡선을 생성하도록 하였다. 모든 과정은 Matlab을 사용하여 구현하였으며 분할된 이미지를 날염제도공정으로의 적용 가능성에 대해 검토하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.161-164
• /
• 2003

A study on the gray images morphing using morphology and spline interpolation is realized. The adapted method is that join the 2 broken line together with the dilation of morphology to the morphing image, remove the holes to be a soft edge at the image boundaries and extract the featuring points with the cubic spline interpolation. As a result of experiment the method elicits more smoothing image morphing in detail and speed up the interframe processing.