• Proceedings of the KSRS Conference
• /
• 2008.03a
• /
• pp.74-79
• /
• 2008

영상 융합은 센서의 자료 저장 능력과 센서에 들어오는 방사에너지 감지의 한계를 해결하고 고해상도의 멀티스펙트럴 영상을 생성할 수 있다는 측면에서 중요한 의의를 지닌다. 특히, 성분대입(component-substitution) 기반의 영상융합 기법은 대용량의 자료를 빠르게 처리할 수 있고, 융합된 영상의 분광왜곡이 적다는 장점을 지니고 있다. 본 연구에서는 최적화기법 중의 하나인 담금질 모사기법(Simulated Annealing, SA)을 이용하여 다양한 성분대입 기반 영상융합 알고리즘들을 분석 및 평가하였다. 담금질 모사기법은 원하는 목적함수가 지역적 최소값이 아닌 광역적 최소값에 수렴이 가능하도록 하는 기법으로 다양한 분야에서의 광역 최적화 기법에 사용된다. 융합 기법의 최적화된 변수를 추출하기 위하여 인위적으로 공간해상도를 낮춘 위성영상을 입력자료로, 원 멀티스펙트럴영상을 참조자료로 사용하였으며, 두 영상간의 분광유사 척도를 담금질 모사 기법의 목적 함수로 구성하였다. 이를 통해 해당 목적함수의 광역적 최소값을 추출하고, 최종적으로 해당 영상에 융합 기법 별 최적화된 변수를 결정하였다. 제안된 최적화 변수의 평가를 위하여 IKONOS 위성영상에 융합을 적용하고, 알고리즘별 분광왜곡량을 비교하였으며 이를 통하여 고해상도 위성영상에 가장 적합한 성분대입 기반 영상융합 기법 및 그에 따른 최적화 변수를 도출할 수 있었다.

• Proceedings of the Korea Contents Association Conference
• /
• 2014.11a
• /
• pp.69-70
• /
• 2014

연안지역에 대한 항공 하이퍼스펙트럴 영상으로부터 객체기반 분류방법을 이용하여 토지피복분류를 수행하고 기존에 주로 사용되어온 화소기반 분류기법에 의한 결과와 비교하였으며, 생성된 토지피복도로부터 해륙경계선인 수애선벡터를 용이하게 추출하는 방법을 제시하였다.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.182-186
• /
• 2003

일반적으로 영상은 공간, 분광 및 시간 해상력을 바탕으로 고해상과 저해상 영상으로 구분된다. 최근 IKONOS 와 QuickBird 등 공간해상력이 1m 이하인 위성 영상들이 국내에 공급되어 바야흐로 고해상 위성영상을 이용한 다양한 활용분야들이 연구되고 있다. 이에 반하여 고분광해상력을 갖는 하이퍼스펙트럴 영상에 대한 연구는 미흡한 실정이다. 국제적으로는 항공기탑재 센서들을 이용한 다양하고 광범위한 조사분석 연구가 이루어지고 있으나, 국내에서는 장비와 관심의 부재로 인하여 초기적인 연구 단계에 있는 실정이다 하이퍼스펙트럴 센서는 환경, 지질, 목표물 인식 분야에 있어 많은 관심을 받고 있으며 위성탑재 초다중분광센서가 운용되기 시작하면서 연구의 활성화가 더욱 기대되고 있다. 본 연구에서는 EO-1 위성의 Hyperion 센서 데이터를 이용하여 노이즈 제거를 위한 영상 전처리 과정을 실시하고 분광특성에 따른 무감독 분류를 통한 인덱싱 기법과 널리 알려진 분광 라이브러리를 활용한 대상물, 특히 인공지물 추출 기법을 실험하였다. 이를 위하여 MNF(Maximum/Minimum Noise Filtering) 변환 및 분광 매칭(Spectral Matching) 기법, 분광 라이브러리 처리 등을 수행하였다. 결과의 비교를 위하여 동일 지역의 Landsat ETM+ 데이터를 이용하여 상호비교를 통한 검증작업으로서 그 성과를 판단하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.4
• /
• pp.1-10
• /
• 2002

For the time-domain simulation of incipient breaking waves, usually the boundary integral method has been used so far, and it seems to be successful except a problem of too much computation time. The present paper shows a new computation technique for the simulation of breaking wave experiment. This technique uses the high-order spectral/boundary element method and the boundary integral method in sequence, and reduces the computation time remarkably. The wave generation and energy focusing process is efficiently simulated by the high-order spectral/boundary element method. Only the wave over-turning process is simulated by the boundary integral method. In the example calculation result, salient features of breaking waves such as high particle velocities and accelerations are shown.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.3
• /
• pp.15-20
• /
• 2008

High-spatial resolution remote sensing satellites (IKONOS-2, QuickBird and KOMPSAT-2) have provided low-spatial resolution multispectral images and high-spatial resolution panchromatic images. Image fusion or Pan-sharpening is a very important in that it aims at using a satellite image with various applications such as visualization and feature extraction through combining images that have a different spectral and spatial resolution. Many image fusion algorithms are proposed, most methods could not preserve the spectral information of original multispectral image after image fusion. In order to solve this problem, modified induction technique which reduce the spectral distortion of fused image is developed. The spectral distortion is adjusted by the comparison between the spatially degraded pan-sharpened image and original multispectral image and our algorithm is evaluated by QuickBird satellite imagery. In the experiment, pan-sharpened image by various methods can reduce spectral distortion when our algorithm is applied to the fused images.

• Journal of Advanced Navigation Technology
• /
• v.17 no.3
• /
• pp.298-305
• /
• 2013

In this paper, we propose simple combining schemes for sensing ATSC digital television signals with spectral correlation density (SCD). The detection algorithms exploiting the cyclostationarity exhibited by the pilot of ATSC digital television signals usually use the SCD value at a given particular frequency. However, we found that non-zero SCDs are found to be distributed over a certain range of frequencies in multipath fading environment. To utilize a set of non-zero SCD values computed in the vicinity of the pilot location, we formulate a class of combining methods in analogy with the maximal ratio combining, the square law combining and the equal gain combining. We show that the proposed simple combining schemes improve the detection performance by 0.5~1.0dB under multipath fading environments.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.5
• /
• pp.314-324
• /
• 2010

In waveguide structures, waves may be partially reflected by local non-uniformities. The effects of local non-uniformities has been previously investigated by means of a combined spectral element and finite element (SE/FE) method at relatively low frequencies. However, since the SE is formulated based on a beam theory, the SE/FE method is not appropriated for analysis at higher frequencies where complex deformation of the waveguide occurs. So it is necessary to extend this approach for high frequencies. For the wave propagation at higher frequencies, a combined spectral super element and finite element (SSE/FE) method is introduced in this paper. As an example of the application of this method, wave reflection and transmission due to a local defect in a rail are simulated at frequencies between 20kHz and 30kHz. Also numerical errors are evaluated by means of the conservation of the incident power.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.2
• /
• pp.87-95
• /
• 2018

This paper introduces a new explicit spectral element method for the simulation of SH-waves in semi-infinite domains. To simulate the wave motion in unbounded domains, it is necessary to reduce the infinite extent to a finite computational domain of interest. To prevent the wave reflection from the trunctated boundaries, perfectly matched layer(PML) wave-absorbing boundary is introduced. The forward problem for simulating SH-waves in PML-truncated domains can be formulated as second-order PDEs. The second-order semi-discrete form of the governing PDEs is constructed by using a mixed spectral elements with Legendre-gauss-Lobatto quadrature method, which results in a diagonalized mass matrix. Then the second-order semi-discrete form is transformed to a first-order, whose solutions are calculated by the fourth-order Runge-Kutta method. Numerical examples showed that solutions of SH-wave in the two-dimensional analysis domain resulted in stable and accurate, and reflections from truncated boundaries could be reduced by using PML boundaries. Elastic wave propagation analysis using explicit time integration method may be apt for solving larger domain problems such as three-dimensional elastic wave problem more efficiently.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.2
• /
• pp.175-181
• /
• 2011

In remote sensing, it has been a difficult task to obtain a multispectral image with high spatial resolution because of the technical limitation of satellite sensors. In order to solve these problems, various pansharpening algorithms have been tried and proposed. However, most pansharpened images created by various approaches tend to distort the spectral characteristics of the original multispectral image or decrease the visual sharpness of the panchromatic image. To minimize the spectral distortion of pansharpened image while preserving spatial information of the panchromatic image, a hybrid pansharpening algorithm based on the spatial correlation was proposed. In this paper, we analyzed the spatial and spectral distortion of the hybrid pansharpened images generated by the various spatial correlation methods. In the experiments, we proved that the method by using Laplacian filtering was more efficient than other high frequency extraction algorithms in the viewpoint of spectral distortion and spatial sharpness.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.7
• /
• pp.761-768
• /
• 2010

This paper presents an effective method to achieve the wideband waveform for high resolution SAR(Synthetic Aperture Radar) using the frequency multiplication technique. And also this paper analyzes the root causes for the spectral regrowth due to 3rd-order intermodulation in chirp bandwidth expansion scheme using quadrature modulator and frequency multipliers. The amplitude and phase imbalance requirement are defined based on the simulation results in terms of quadrature channel imbalance. This minimizes the degradation of range resolution, peak sidelobe ratio and integrated sidelobe ratio. The wideband chirp generator using the frequency multiplier and memory map scheme was manufactured and the compensation technique was presented to reduce the spectral regrowth of SAR waveform by minimizing the amplitude and phase imbalance. After I and Q channel imbalance adjustment, the carrier level reduces －28.7 dBm to －53.4 dBm. Chirp signal with 150 MHz bandwidth at S-band expands to 600 MHz bandwidth at X-band. The sidelobe levels are reduced by about 8 to 9 dB by compensating the amplitude balance between I and Q channels.