• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 춘계학술대회 논문요약집
• /
• pp.137-137
• /
• 2004

최근, 나노 위치결정 시스템이 우주항공, 광통신, 의학 등 많은 분야에서 사용되고 있다. 이러한 나노위치결정 시스템에 있어서 가장 중요한 것은 안정성이다 열팽창과 가공에 의한 오차를 줄이기 위해 단일재료를 사용하고 대칭구조로 구성해야만 한다. 또한 나노 스케일의 분해능을 가지기 위해서는 스틱 슬립(stick-slip) 마찰이나 백래쉬(backlash) 기구가 없어야만 가능하다. 이러한 조건들을 만족하기 위해서 선행 연구자들은 유연힌지(flexure hinge)를 사용한 컴플라이언스 기구(compliance mechanism)를 제안하였고 이미 마이크로/나노 위치결정 시스템에 대한 연구와 개발이 이루어졌다.(중략)

• Tribology and Lubricants
• /
• 제31권1호
• /
• pp.6-12
• /
• 2015

This paper investigates the stick-slip characteristic of magnetorheological elastomer (MRE) between an aluminum plate and the surface of the MRE. MRE is a smart material and it can change its mechanical behavior with the interior iron particles under the influence of an applied magnetic field. Stick-slip is a movement of two surfaces relative to each other that proceeds as a series of jerks caused by alternate sticking from friction and sliding when the friction is overcome by an applied force. This special tribology phenomenon can lead to unnecessary wear, vibration, noise, and reduced service life of work piece. The stick-slip phenomenon is avoided as far as possible in the field of mechanical engineering. As this phenomenon is a function of material property, applied load, and velocity, it can be controlled using the characteristics of MRE. MRE as a soft smart material, whose mechanical properties such as modulus and stiffness can be changed via the strength of an external magnetic field, has been widely studied as a prospective replacement for general rubber in the mechanical domain. In this study, friction force is measured under different loads, speed, and magnetic field strength. From the test results, it is confirmed that the stick-slip phenomenon can be minimized under optimum conditions and can be applied in various mechanical components.

• 폴리머
• /
• 제37권5호
• /
• pp.642-648
• /
• 2013

이상소음은 고분자 판재가 상호간에 미끄럼 운동을 할 때 마찰에 의한 스틱-슬립 메카니즘에 의하여 발생한다. 본 연구에서는 실험적 방법을 통하여 이상소음을 줄이기 위하여 가전제품에 많이 사용되는 ABS, PP, MIPS, POM 고분자 소재에 대하여 ABS를 기초로 하여 소재간의 조합이 이상소음에 미치는 영향을 알아보았다. 소재간 마찰에 의한 이상소음을 평가하기 위한 실험방법과 장치를 제안하였으며, 실험변수로는 소재의 조합뿐만 아니라 고분자 판재의 표면 거칠기, 수직 접촉하중, 상대운동 속도 등을 두었다. 본 연구를 통하여 이상소음 저감을 위해서 ABS 소재와 POM 소재 조합이 가장 좋음을 알 수 있었으며, 다른 재료조합에 대한 결과도 상호 비교하였다.

• 한국음향학회지
• /
• 제43권1호
• /
• pp.49-59
• /
• 2024

최근 환경규제가 강화되고 고유가 문제로 인하여 전기차 시장이 점차 커지고 있으며 또한 내연기관 자동차에서도 엔진의 Noise, Vibration, Harshness(NVH) 관련 소음이 저감되고 외부에서 유입되는 소음의 차폐 기술이 발전됨에 따라 Buzz, Squeak, Rattle(BSR) 이음의 민감도가 증가하는 추세이다. 본 연구에서는 자동차의 Panoramic Curved Display(PCD)에서 발생하는 Stick-slip 이음과 고분자 플라스틱의 표면에너지 및 극성 성분과의 상관관계에 대하여 분석하였다. 극성 고분자 소재인 Acrylonitrile Butadiene Styrene(ABS)와 PolyCarbonate-Acrylonitrile Butadiene Styrene(PC-ABS)를 대상으로 컴파운드 소재를 제작하여 평가하였다. 결과적으로 고분자 플라스틱의 극성성분이 3.86 mN/m 이상일 때 Stick-slip 거동이 발생하였으며, 시간에 따른 마찰 거동에서 absolute transition slope가 증가할수록 Stick-slip의 이음 가능성이 증가하고 마찰계수의 값 차이가 클수록 Stick-slip 이음의 세기가 증가하였다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 제35회 춘계학술대회
• /
• pp.296-303
• /
• 2002

Tribology, in other words, interacting surfaces in relative motion, is essential in life. The relative motion on surfaces may cause some problems with heat, vibration, noise, and so on. Unwanted vibrations by friction, which may arise during the operation of machines, are costly in terms of reduction of performance and service life. All these phenomena inolve stick-slip. The telescopic boom operations involves stick-slip oscillations like slideways. Unwanted stick-slip oscillations on telescopic boom operations cannot achieve smooth sliding and many developers of that machine makes a lot of effort to remove or reduce it. So this paper presents stick-slip oscillation with pressure of the hydraulic cylinder which drives booms, and attempts a theoretical approach for the numerical analysis for its stick-slip condition.

• 한국철도학회논문집
• /
• 제12권6호
• /
• pp.887-894
• /
• 2009

라인 레이저와 고속카메라를 이용한 고해상도 레일 마모도 측정 시스템에 대한 최적의 측정 정밀도를 확보하기 위하여 영상 평가지표를 기반으로 촬영 영상에 대한 영상평가를 수행하고 레일 마모도 측정 시스템의 성능을 정량적으로 분석함으로서 시스템 구성과 설치에 따른 레일 마모도 측정 시스템의 성능을 정량적 평가지표(MTF, NPS, DQE)로 추정할 수 있는 방안을 제시하였다.

• Tribology and Lubricants
• /
• 제21권1호
• /
• pp.16-20
• /
• 2005

Friction and wear characteristics between two steel surfaces under fretting condition are investigated experimentally. The fretting damage caused by low-amplitude oscillatory sliding can be classified into three regimes of gross-slip, mixed-slip and partial-slip due to stick-slip phenomenon. One of the most important characteristics of fretting wear is the transition from gross-slip to mixed-slip. This study was focused on getting the degree of stick-slip out of the friction transition under fretting condition. Fretting wear is divided into three conditions of gross-slip/mixed-slip/partial-slip. The criteria for the division are friction and displacement amplitude, wear scar morphology and dissipated energy. In this test, friction force and displacement were measured for detecting the transition from mixed-slip to gross-slip and qualitatively predicting the degree of the wear.

• 한국공작기계학회논문집
• /
• 제11권5호
• /
• pp.7-14
• /
• 2002

In order to achieve high precision machine tools, the research for performance enhancement of feed drive systems is required. Development of the high speed feed drive system has been a major issue for the past few decades in machine tool indestries. Because table levitation system decrease the table weight, an effect of reaction by weight is minimized and lost motion can be removed at maximum. In case fled system is designed with drive motor, ball screw and support bearing load capacity selection, an effect of decrease of the table weight exist. So, the table weight through an effect of decrease call it into the realization of cost down. Stick-slip friction has a great influence on the contouring accuracy of CNC machine tools. In this paper table levitation system has been developed for the stick-slip in a fled drive systems.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.331.1-331
• /
• 2002

Four degrees of freedom mathematical model is presented to describe the fundamental mechanisms of the disc brake squeal noise. A contact parameter is introduced to describe the coupling between the in-plane and the out-of-plane motions. The friction coeficient including "relative velocity" and ′normal force" can be generally formulated as the form of multiplication with polynominal parameters(${\beta}$, ${\gamma}$). (omitted)

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.982-986
• /
• 2000

Perpendicular guideway mechanism has a different behavior with horizontal guideway mechanism due to the slider weight. So, to decrease its weight effect, counter balances such as weight type and hydraulic cylinder type are used. But it can also make another motion behavior by weight rate of slider and counter balance, its connected position. Therefore, it is necessary to find design parameters and analyze their effect. This paper dealt with the optimal design of perpendicular guideway mechanism. For analysis, the theoretic model as same as real machine tool and sib plate to adjust the clearance was used. Rotational angle and displacement of slider, pressure distribution, friction distribution were calculated. Stick slip, intermittent motion of slider according to friction change was adapted to the perpendicular guideway mechanism.