• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.5 no.3
• /
• pp.138-143
• /
• 2012

In the study, we were develop unification of examination paper switchboard that reduced the hassle about previously glucose measurement. Examination paper case was produced to magazine for minimize when you use the previously products occurred hand pollution or loss rate. And, Quantity of examination paper can be checked in real time by seeking the convenience of patients. In this study, we selected one model but you can product any examination paper case. Data was construct through surveys to questionnaires and satisfaction. Purchasing was received to high rating 67%. In this study, we were trying minimize inconvenience during self scan for diabetes patient. Further, we were suggest various products that were improve the functionality and practicality through practicality in design.

• Journal of Advanced Navigation Technology
• /
• v.23 no.5
• /
• pp.415-423
• /
• 2019

In this paper, a design method for a high-sensitivity microstrip patch sensor antenna (MPSA) loaded with a bent-slot was studied for the permittivity measurement. The bent-slot similar to a single-ring complementary split ring resonator was added along a radiating edge of the patch in order to enhance the sensitivity to the permittivity. The sensitivity of the proposed MPSA was compared with that of a conventional rectangular MPSA and a thin rectangular-slotted MPSA. Three MPSAs were designed and fabricated on a 0.76-mm-thick RF-35 substrate so that the input reflection coefficient would resonate at 2.5 GHz in the absence of the superstrate under test. When five different Taconic substrates with a relative permittivity ranging from 2.17 to 10.2 were used as the superstrate under test, experiment results show that the sensitivity of the proposed MPSA, which is measured by the shift in the resonant frequency of the input reflection coefficient, is 4.1 to 6.1 times higher than that of the conventional MPSA.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.6
• /
• pp.388-395
• /
• 1986

Dispersion characteristics of shielded single, coupled and edge-offset microstrip structures are investigated by using hybrid mode analysis with Galerkin's method in the spectral domain. Two new basis functions for the longitudinal strip current are proposed and convergence rates of the solutions for the basis functions are compared. Current distribution of the coupled line is obtaind from that of the single line by using shift theorem of the Fourier transform. In addition, effects of off-centered inner strip conductor on dispersion are also discussed Numerical results include various structual parameters and are compared with other available data and good agreements are observed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.469-470
• /
• 2015

General microstrip patch antenna has small bandwidth. Also this patch antenna is strongly influenced by the thickness of dielectric substrate and its relative permittivity. In this paper, wideband microstrip patch antenna operating in 2.4GHz ISM band is studied. Input impedance and return loss for designed microstrip patch antenna by using MoM method and is estimated.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.3
• /
• pp.1-6
• /
• 1990

When TE waves incident to the infinite conductor grating plane, current distributions on the strip is found by the spectral domain analysis and the moment method. Current distributions on the strip as the parameter of incident angle of waves are calculated for the grating plane of which strip space is $0.05{\lambda}{\sim}5{\lambda}$, and of which the ration of strip width to its space is 0.4 - 0.8 . In order to varify the validity of the present method, the numerical results are compared with other method.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1421-1422
• /
• 2015

본 연구는 스트립 힘센서에 기반한 무구속 호흡측정에서 스트립센서 최적 위치를 고찰하는 것을 주목적으로 한다. 이를 위해 압전센서를 사용하여 스트립 힘센서를 제작하였으며, 머리, 흉부, 복부 아래에 위치시켜 호흡성분을 검출하였다. 호흡성분 측정 정확성은 온도센서를 사용하여 코에서 동시에 측정된 기준 호흡과, 각 위치에서 측정된 결과의 비교를 통해 분석하였다. 결과적으로, 12명의 피험자를 대상으로 실험을 수행한 결과, 스트립센서를 사용하여 측정된 호흡간격은 기준센서 대비 $1.3669{\pm}0.5639$ 초 (머리), $0.9844{\pm}0.6336$ 초 (흉부), $0.7133{\pm}0.5185$ 초 (복부)의 평균절대오차를 보였다. 이는 복부에서 검출된 호흡성분이 기준호흡과 가장 유사함을 보여준다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2010.07a
• /
• pp.229-232
• /
• 2010

본 논문에서는 900MHz대역의 대각선 슬롯형 마이크로스트립 패치 안테나를 설계하였다. 제안한 마이크로스트립 패치안테나는 안테나 크기, 절단 길이, 급전위치, 공기층의 높이 등과 같은 중요 파라미터를 고려하여 설계하였다. 설계한 마이크로스트립 패치안테나는 915MHz에서 최소의 반사손실을 가지며, 반사손실을 -16dB 이하에서 정재파비가 1.2이하일 경우, 약 26MHz의 대역폭을 확보함을 알 수 있다. 또한, 설계한 대각선 슬롯형 마이크로스트립 패치 안테나는 915MHz 중심주파수 대역에서 이득이 6dB이고, 축비가 2.8dB 되어 우수한 특성을 갖는다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.5
• /
• pp.773-781
• /
• 2000

We proposed an eccentric annular ring microstrip slot antenna for improving a narrow bandwidth of the conventional annular ring microstip slot antenna. The proposed antenna has an asymmetric slot and a normal microstrip feedline. This antenna is analyzed and optimized by using the finite difference time domain (FDTD) method. The impedance bandwidth of the optimized antenna is more than 1 octave that is much broader than the conventional annular ring microstrip slot antenna for the same size.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.9
• /
• pp.1949-1956
• /
• 1997

The mode parameters of asymmetrical coupled microstrip lines on composite substrates are derived by using closed form expression. A 10 dB directional couplers, where the center frquency is 1.8 GHZ, are fabricated on a single-layer substrate and on compsite substrates respectively. It is shown that coupler on a single-layer substrate.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.58-59
• /
• 2011

Microstrip line on dielectric substrate depending on the type of its configuration can be applied to be antenna, communication filters, and resonators. When driving frequency is considered more than X-band, unnecessary signal leakage should be occurred because of flowing through the planar circuit at banding position. So leakage signal will affect other planar circuit, and then EMC problem has to be introduced. In this paper, the affection of banding planar circuit on dielectric substrate was investigated.