• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.298-303
• /
• 2000

A procedure to predict the fatigue life of rubber components based on the signed principal strain method was proposed. A tension-compression rubber specimen with Jang-gu shape was designed and principal strain distribution was obtained by using the nonlinear finite element analysis. Finite element analysis and fatigue test of strut rubber mount were conducted to evaluate the fatigue life prediction procedure proposed. A procedure was employed to predict the fatigue life of strut rubber mount. Predicted fatigue lives have a good agreement with tested lives within a factor of 3.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.19-20
• /
• 2012

According to develop urban area, the depth and floor area of basement tend to become deeper and larger. Excavation work for basement floor work is very important because its cost take 20% of total construction cost. Therefore, many studies of developing retaining wall system have performed for feasibility and safety in deep excavation work. In this study, new supporting system used high-strength pipe for retaining wall is introduced to reduce the construction cost and improve the safety and constructability by analyzing case study.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1613-1618
• /
• 2004

Diffuser is an important fluid-mechanical equipment to convert kinetic energy into pressure energy. Many of the experimental and theoretical researches have been done in a diffuser but the understanding of energy transfer and detailed mechanism of energy dissipation is unclear. In this study, computations were performed using a numerical method with SIMPLE algorithm for conical diffuser with various diffuser angles and diffuser lengths. Also, we investigated the pressure recovery coefficient in conical diffuser by inserting strut. In this paper, we showed that the strut can cause a rising pressure recovery.

• 설비공학논문집
• /
• 제15권7호
• /
• pp.579-585
• /
• 2003

The ejector system is used for making a vacuum in an enclosed tank. This research represents the method to improve ejector performance by inserting a strut at the center of ejector outlet. This proposed ejector system is so simple and have a low cost to improve the ejector performance. There are many kinds of method for obtaining a lower vacuum pressure. The ejector is consists of nozzle, straight pipe and outlet diffuser and we focused on the outlet diffuser for high ejector performance. The strut is located at the center of ejector outlet diffuser. As the experimental result, we compared the vacuum pressure with and without a strut and without strut, and the ejector performance showed an improvement with 40% or more than the case without strut. This means that the stable fluid low energy loss was obtained by inserting the strut.

• 한국지반공학회논문집
• /
• 제15권1호
• /
• pp.31-40
• /
• 1999

스크류잭은 스트러트에 충분한 선행하중을 가할 수 없기 때문에 스크류잭을 이용한 버팀대공법은 주변지반의 변위를 억제하는데 효과적이지 못하다. 따라서 버팀 굴착시 주변지반의 과도한 변형을 방지하기 위하여 새로운 선행하중잭을 개발하였다. 본 논문에서는 새로 개발된 선행하중잭과 그 장치를 이용하여 시공한 현장 중 3곳에서 측정한 흙막이벽체의 수평변위에 대한 결과를 소개하였다 현장에서 계측한 결과에 의하면 흙막이벽체의 최대수평변위는 굴착심도의 0.15% 이내로, 스트러트에 가해지는 선행하중에 의하여 최소화될 수 있는 것으로 밝혀졌다. 그리고 경제성 분석을 위하여 스크류잭을 이용한 버팀대공법과 버팀대 선행하중공법에 의한 공비와 공기를 비교한 결과 버팀대 선행하중공법이 공사비와 공사기간의 단축에도 효과적인 것으로 나타났다.

• KIEAE Journal
• /
• 제8권1호
• /
• pp.87-92
• /
• 2008

Sheathing work used for excavation in a crowded downtown is generally a temporary strut method using H-piles and sheathing wall includes lagging, CIP, SCW or slurry wall. A temporary strut serving the support for sheathing wall acts to resist the earth pressure, but it shall be removed when installing the underground structure members. A traditional temporary strut might cause the stress imbalance of the sheathing wall when it is demolished, resulting in time extension and the risk of collapse. A traditional temporary strut method thus needs to be improved for schedule and cost reduction, risk mitigation and for preparation for potential civic complaint. A permanent strut method doesn't require installing and demolishing the temporary structure that will lead to reducing the time and cost and the structural risk during the demolition process. And given the girder, the part of the underground structure, serves the role of strut, it can secure the wider interval compared to the traditional method, which enables to secure the wider space for the convenience of excavation as well as enhance the constructability and efficient site management. The thesis was intended to study the composite girder designed to use the strut as permanent structure so as to reduce the excavation and floor height.

• Elastomers and Composites
• /
• 제45권4호
• /
• pp.291-297
• /
• 2010

차량에서 스트러트 인슐레이터는 도로노면으로부터 발생하는 소음과 진동을 방지하는 역할을 한다. 대부분의 점탄성 마운트들은 고무로 되어있으며 천연고무가 주성분이다. 이러한 고무 부품들은 초기에는 제 역할을 하지만 오랜 시간 고온과 반복하중에 노출되면 성능저하가 일어난다. 고무성능 변화는 NVH를 떨어뜨리고 승차감을 저하시킨다. 본 연구에서는 차량실험을 통해 스프링 변위를 측정하였고, 재현실험에서 가속도 센서를 이용하여 운행거리와 차량연식에 따른 인슐레이터 고무성능을 가속도 값, 고무 영구 변형량, 경도를 나타내었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제11권4호
• /
• pp.62-70
• /
• 2007

본 연구는 철근콘크리트 기둥과 철골보로 이루어진 내부 접합부의 전단강도에 관한 연구이다. 일반적으로 RCS 접합부의 공칭전단강도는 철골웨브와 콘크리트의 전단저항 합으로 산정하고 있다. 본 연구에서는 기존에 RCS 접합부의 콘크리트 전단강도 계산에 사용되었던 압축장 이론의 단점을 분석하여 보다 합리적인 압축스트러트 모델을 제안하였다. 제안된 모델의 적합성을 기존 연구자에 의해 수행된 실험결과와의 비교평가를 통하여 실시해 본 결과, 실험결과와 계산값이 잘 일치하는 것으로 나타났다.

• 한국건설관리학회논문집
• /
• 제5권3호
• /
• pp.71-78
• /
• 2004

In conventional method of supporting soil shuttering wall during excavation a system of struts and wales to provide cross-lot bracing is common in trench excavations and other excavations of limited width. This method, however, becomes difficult and costly to be adopted for large excavations since heavily braced structural systems are required. Another expensive and unsafe situations are expected when temporary struts must be removed for the construction of underground structures. This paper introduces innovative strut systems which can be used as permanent underground structures after its role as brace system to resist earth pressure during excavation phase. Underground structural system suggested from architect is checked against the soil lated pressures before the analysis of stresses developed from gravity loads. In this technology, named SPS(Struts as Permanent System), retaining wall is installed first and excavation proceeds until the first level of bracing is reached. Braces used as struts during excavation will serve as permanent girders when buildings are in operation. Simultaneous construction of underground and superstructure can proceeds when excavation ends with the last level of braces being installed. In this paper, construction sequence and the calculation concept are explained in detail with some photo illustrations. SPS technology was applied to three selected buildings. One of them was completed and two others are being constructed Many sensors were installed to monitor the behavior of retaining wall, braces as column in terms of stress change and displacement. Adjacent ground movement was also obtained. These projects demonstrate that SPS technology contributes to the speed as well as the economy involved in construction.

• 콘크리트학회논문집
• /
• 제15권2호
• /
• pp.297-304
• /
• 2003

본 연구에서는 철근콘크리트 기둥과 철골보로 구성된 혼합 골조구조의 접합부에 대한 구조적 특성을 평가하였다. 주요변수로는 본 연구에서 제안한 자주식(子株式) 횡보강근 상세와 기존의 RCS 공법에서 사용되고 있는 ㄱ-4조각 조합형 및 용접형 등의 횡보강근 상세를 대상으로 하였다. 실험체는 총 5개의 내부접합부를 대상으로 2/3 축소로 제작하여 접합부의 전단 및 내진성능을 평가하였다. 실험의 결과, 모든 실험체에서 최대내력 이후 강도 및 강성의 큰 저하없이 실험이 종료되었다. 따라서, 자주식(子株式) 횡보강근을 사용한 RCS 접합부의 구조성능은 4조각 조합형 및 용접형 등의 기존 공법과 동등 이상의 구조적 성능을 확보하는 것으로 나타나 외부 판넬의 전단기여도는 압축스트러트에 의해 평가하는 것이 보다 적절할 것으로 판단된다.