• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.10
• /
• pp.2147-2153
• /
• 2009

A Hybrid type Linear Pulse Motor(LPM) for low cost is designed as single side stator structure. The static and dynamic characteristics measurement systems are designed. Experimental measurement systems, which measure the static and dynamic characteristic of the LPM, are uggested for the prototype LPM. It becomes known the values of the thrust forces. Finally the microstep drive method is adopted to the drive of prototype LPM. The waveform difference is measured between the microstep method and rectangular wave. From the experimental results, it can be confirmed that the repetitive ripple of the thrust force of the prototype LPM are reduced by taking the microstep drive method.

• Journal of Power System Engineering
• /
• v.13 no.4
• /
• pp.62-67
• /
• 2009

In this paper we designed a prototype hybrid type linear pulse motor (HLPM) with single side stator structure for low cost. The measurement system which can get the motor characteristics of the HLPM was suggested. The static and dynamic characteristics of the thrust force are measured analyzed. And the microstep drive method is adopted and tested to the drive of prototype HLPM. The thrust waveform is measured respectively to know the differences of the thrust waveform between the microstep drive method and rectangular wave. From the experimental results, it can be confirmed that the repetitive ripple of the thrust force of the prototype HLPM is reduced by taking the microstep drive method.

• Proceedings of the KAIS Fall Conference
• /
• 2001.05a
• /
• pp.129-134
• /
• 2001

본 논문에서는 자동차 계기판 지시계 구동용 액츄에이터 연구의 일환으로써 소형 2상 스텝모터에 대하여 유한요소 수치해석을 이용한 설계, 해석 및 One Chip을 이용한 유량, 온도, RPM 및 속도 지시계 동시제어용 전용 구동 IC를 설계하였다. 일반적으로 자동차 계기판에 사용되어지고 있는 지시계의 구동원으로 코일형의 액츄에이터를 사용하고 있으나, 동작구간내의 선형성 및 속응성 저하와 구조상 큰 체적으로 인한 공간확대의 문제가 야기되어지고 있다. 따라서, 본 연구에서는 고 에너지 밀도를 갖는 소형의 영구자석과 저 손실 특성을 갖는 정밀 기어부 설계를 통하여 경량. 박형의 PM형 스텝모터를 설계하였으며. 또한 다수 모델 제어용 전용 드라이버 IC 설계 및 제작을 하였다. 실제로 제작한 모델을 대상으로 특성평가를 행하였으며, 이로부터 높은 선형성 및 고정밀도와 저소음 특성을 갖는 자동차 계기판 지시계용 구동원 및 드라이버의 활용 가능성을 확인 할 수 있었다.

• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.318-321
• /
• 1997

This paper is about improving characteristic of plant by using micro-step driver method in 5 phase step motor for satisfying the condition of low oscillation and high accuracy in soldering machine. We choose open loop control method for minimizing hardware system and use one chip microprocessor, power MOSFET nd some device to realize accurate micro-step driver system.

• Proceedings of the KIEE Conference
• /
• 1988.11a
• /
• pp.21-23
• /
• 1988

Microstepping drive of 3 phase VR step motor with 2 phase exciting scheme is proposed. Considering the presence of harmonic components of inductance, the current reference is calculated. The experimental results show high accuracy of divided step position and resonance or instability in operating range.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.530-534
• /
• 1989

In this paper we addressed the basic concept of microstepping, analyzed the combined effect of the motor detent torque and the current profile, and implemented a microstepping drive system using an one-chip microprocessor, power MOSFET's, and a 1.8 degree bifilar-wound hybrid-type step motor excited by a bipolar drive. Experimental results show that microstepping produces greater resolution, eliminates resonant step loss, and reduces motor vibrations.

• Proceedings of the KIEE Conference
• /
• 1986.07a
• /
• pp.37-40
• /
• 1986

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.10a
• /
• pp.353.2-353
• /
• 2001

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.234-236
• /
• 2001

자동차 산업의 활성화로 인하여 차량의 연료 소비의 고효율화 및 구동모터의 고정밀 설계 기술의 향상이 대두되고 있는 실정이다. 특히, LPG 차량의 연료 펌프 모터의 고속화, 저진동, 저 소음화의 추세로 인하여 기존의 Brush타입의 DC모터를 대체하기 위한 Brushless DC 모터의 개발이 증대되고 있다. 본 논문에서는 이러한 Brushless DC모터의 고정밀 속도제어 및 빠른 응답 특성을 가지는 제어기를 개발하였으며, 회전자의 위치를 파악하기 위하여 역기전력을 이용한 센서리스형 제어기를 개발하였다. 본 논문에서 개발한 제어기는 가변속도제어범위를 가지며. 2000rpm에서 정격 속도를 가진다. 제어기의 성능 검증을 위하여 정격 속도에서의 단위스텝 응답 특성 실험을 하였으며, 각각의 게인 설정에 따른 제어 성능 실험을 하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.677-680
• /
• 2008

Miniaturization of equipments which have wireless network function and sensor have changed utilization method of computer in daily life, and have contributed to development for ubiquitous computing environment. In this paper, we design camera control system based wireless mobile and web-environmental through which nurse, doctor and family of patient can share and observe the information on condition of patient in hospital. Besides, this camera control system makes it possible to integrate diverse equipments of hospital into one system, and to conduct remote control function which can be applied to the patient control system. It is impossible to control shooting direction of camera apparatus in a remote area for observing patient in a hospital room through general web camera. So in this paper, we showed new design; we attached step motor which can rotate 360 degrees to web camera, and the step motor can operate through control board. Besides, we developed application for two environments, mobile and web-based environment, which enables us to offer proper efficiency in accordance with condition of observer through observation of control and collected image data.