• Korean Journal of Applied Biomechanics
• /
• v.18 no.1
• /
• pp.73-83
• /
• 2008

The purpose of this study was to investigate kinematic variables of three types of volleyball jump blocking motions through 3D video analysis. The subjects participated in this study were 7 male university volleyball players and 7 male physical education majors. 1. Regardless of blocking types, peak vertical velocity and jump height in the skilled group were faster and higher than the unskilled group. 2. The skilled group was flexed lower than the unskilled group at E2 of the hip, knee, and ankle joint during the cross over step blocking. 3. In all types of step, the peak angular velocity of the hip, knee, and ankle joint was showed at E2. 4. The skilled group was slower than the unskilled group at E2 of the angular velocity of the hip, knee, and ankle joint during cross over step blocking. In conclusion, the cross over step blocking in which the use of the upper extremities was relatively more available was effective to improve a defence skill for the jump height.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.826-830
• /
• 2000

Sculptured surface machining plays a vital role in the process of bring new Products to the market place. A great variety of products rely on this technology for the production of the dies and moulds used in manufacturing. And, the use or CNC machines and CAD/CAM system has become a vital parts or product development process. But, cusp is inevitable by-product in sculptured surface machining, and it is very difficult to calculate the cusp height correctly. In this study, an analytical cusp height model is proposed considering the radius of the ball end mill, radius of machined workpiece and the inclined angle of convex or concave circular surface. Experiments were performed to check the validity of this proposed model and experimental results showed that the proposed cusp model were very effective.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1055-1057
• /
• 2002

산업이 발전할수록 정밀 위치제어 알고리즘에 대한 요구가 증가하고 있으며, 선형 전동기의 보급에 따라 1um 단위의 고급 위치 제어 알고리즘에 대한 중요성이 커지고 있다. 위치제어에 있어서 작업의 신속성 및 정밀도를 높이기 위해서는 제어의 오버슛 현상을 억제할 필요가 있으며, 현장에서 직접 활용이 가능하도록 하려면 보다 간단한 구조의 제어 알고리즘이 요구된다. 위치제어에서 가장 큰 문제는 전동기의 최대 속도 및 최대 전류 제한에 의한 비선형성이 위치의 과도한 오버슛으로 나타난다는 것이며, 기존의 고급 알고리즘에서는 미리 제공되는 S-커브 형태의 위치 명령 패턴을 사용하여 속도 및 전류 제한을 회피하고 있다. 본 연구에서는 고급 제어 알고리즘과 동일한 성능을 내면서 복잡한 패턴 생성기를 사용하지 않고도 실제 위치가 오버슛없이 부드러운 S-커브 형태로 목표값에 수렴하는 새로운 형태의 위치제어기를 제안한다. 제안된 제어기는 비교적 간단한 구조로 인하여 헌장 적용력이 매우 뛰어나며, 이득 설정이 간편하다는 장점을 지니고 있다.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.6
• /
• pp.303-307
• /
• 2011

This paper describes an audio watermarking using Quantization Index Modulation (QIM) on significant peaks in frequency domain. The audio signal is broken up into L samples length frames with non-overlapping and rectangular window. The zero-crossing rate of each frame is calculated for decision whether it is proper to be watermarked or not. If the frame is legitimate, frequency magnitude response is computed by discrete Fourier transform. For the QIM, we set the quantization step size based on maximum value of frequency magnitude response and select n significant peaks with w samples around them in frequency domain, totally $n{\times}(w+1)$ samples. Finally, watermark embedding is performed. Decoder extract watermarks based on Euclidean distance, that is a blind detection. The proposed method is robust against many attacks of watermark benchmark.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.1 s.307
• /
• pp.91-100
• /
• 2006

A scheme is proposed for implementing the block LMS algorithm in a block floating point framework that permits processing of data over a wide dynamic range at a processor complexity and coat as low as that of a fixed point processor. The proposed scheme adopts appropriate formats for representing the filter coefficients and the data. Using these and a new upper bound on the step size, update relations for the filter weight mantissas and exponent are developed, taking care so that neither overflow occurs, nor are quantifies which are already very small multiplied directly. It is further shown how the mantissas of the filter coefficients and also the filter output can be evaluated faster by suitably modifying the approach of the fast block LMS algorithm

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.3
• /
• pp.173-179
• /
• 2017

This paper analyzes actuator characteristics for main wing and tail surfaces of an ornithopter by using a motion capture test. Experiments with the ornithopter are conducted indoor, and its fuselage is held on a jig to reduce interaction with vibration generated by flapping motion. The motion capture system detects the movement of markers attached on the main wing and tail wing tip. Experimental results show that the main wings tend to change its amplitude according to the flapping frequency, and the lift and thrust generation simulation is implemented by applying the experimental results and the ornithopter specification to Modified Strip Theory. Step input excitation is applied for experimental analysis of the tail wing in horizontal and vertical directions. As a result, horizontal and vertical tail wings have different characteristics in terms of overshoot, final value, damping ratio and natural frequency because they have different wing structures and linkages.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.345-359
• /
• 2002

The purpose of the study was to provide the fundamental data to instruct athletes through the analysis athletes' movement in javelin. Three athletes in the level of national representative were participated in this study. The study analyzed kinematic variables(lead foot and releasing javelin) through 3-D analysis and obtained the following results. 1. During withdrawal, it is important to maintain of running horizontal velocity. 2. It was showed that throng average height was $84{\pm}3.3%$ and javelin adequative degree, Among the athletes, $S_2$ who had the best record was released the javelin with the fast velocity, but throw the javelin with the less releasing velocity. 3. $S_2$ released after lead foot were completely landed and therefore it is no problem in a kinematic aspect. However, $S_1$ angle was too small. it caused increase of release velocity to be prevented. 4. $S_2$ showing the best result indicated shorter in duration time. Generally, the shorter duration time in release phase showed the longer release distance. Especially $S_1$ and $S_3$ showing the worse result indicated the longer duration time in preparatory phase, causing the breakup of force. Therefore to improve the record, it should be decreased the duration time in preparatory phase. 5. Compared with $S_1$ and $S_3$, $S_2$ showing the best record indicated the higher velocity in center of mass, trunk, upper arm, lower arm and hand That is the higher velocity of upper arm at release leaded the better velocity transfer from upper arm to following lower arm and hand, these action should be considered to be helpful of better record. According to the above conclusion, when the athletic leaders cauch athletes, they should focus on maintaining knee angle, upper body and hip angle in a previous stage of release and throwing angle, throwing height, throwing velocity in a release stage.

• The Korean Journal of Petroleum Geology
• /
• v.13 no.1
• /
• pp.1-16
• /
• 2007

The southeastern Korean Peninsula has experienced crustal multi-deformations according to changes of global tectonic setting during the Cenozoic. Characteristic features of the crustal deformations in relation to major Cenozoic tectonic events are summarized as follows. (1) Collision of Indian and Eurasian continents and abrupt change of movement direction of the Pacific plate (50${\sim}$43 Ma): The collision of Indian and Eurasian continents caused the eastward extrusion of East Asia block as a trench-rollback, and then the movement direction of the Pacific plate was abruptly changed from NNW to WNW. As a result, the strong suction-force along the plate boundary produced a tensional stress field trending EW or WNW-ESE in southeastern Korea, which resultantly induced the passive intrusion of NS or NNE trending mafic dike swarm. (2) Opening of the East Sea (25${\sim}$16 Ma): The NS or NNW-SSE trending opening of the East Sea generated a dextral shear stress regime trending NNW-SSE along the eastern coast line of the Korean Peninsula. As a result, pull-apart basins were developed in right bending and overstepping parts along major dextral strike slip faults trending NNW-SSE in southeastern Korea. The basins can be divided into two types on the basis of geometry and kinematics: Parallelogram-shaped basin (rhombochasm) and wedged-shaped basin (sphenochasm), respectively. In those times, the basins and adjacent basement blocks experienced clockwise rotation and northwestward tilting contemporaneously, and the basins often experienced a kind of propagating rifting from NE toward SE. At about 17Ma, the Yonil Tectonic Line, which is the westernmost border fault of the Miocene crustal deformation in southeastern Korea, began to move as a major dextral strike slip fault. (3) Clockwise rotation of southeastern Japan Island (about 15 Ma): The collision of the Izu-Bonin Arc and southeastern Japan Island, as a result of northward movement of the Philippine sea-plate, induced the clockwise rotation of southeastern Japan Island. The event caused the NW-SE compression in the Korea Strait as a tectonic inversion, which resultantly tenninated the basin extension and caused local counterclockwise rotation of blocks in southeastern Korea. (4) E-W compression in the East Asia (after about 5 Ma): Decreasing subduction angle of the Pacific plate and eastward movement of the Amurian plate have constructed the-top-to-west thrusts and become a major cause for earthquakes in southeastern Korea until the present time.