• Journal of Korea Multimedia Society
• /
• v.11 no.8
• /
• pp.1059-1071
• /
• 2008

Users in ubiquitous computing environment can easily access and use a multitude of devices and services anywhere and anytime. The key technology to realize this scenario is the method to intuitively provide proper user interfaces for each device and service. Previous attempts simply provided a designated user interface for each device and service or provided an abstract user interface to control common functions of different services. To select a target appliance, either user directly specified the target device or depended on sensors such as RFID tags and readers limiting the applicable scenarios. In this paper, we present UbiController which uniquely uses camera on the mobile device to recognize markers of appliances to acquire user interface for controlling task. UbiController aims to provide automatic discovery of multiple services in the smart home environment, support traditional GUI and novel camera-based recognition method as well as intuitive interaction methods for users. In this paper, we show experiments on the performance of UbiController's discovery and recognition methods and user feedback on interaction methods from a user study.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.5
• /
• pp.292-299
• /
• 2018

The vehicle exterior design is the main parameter of aerodynamic wind noise, but the modification of it is nearly impossible at a proto-type stage. Therefore, it is very important to verify exterior design and estimate the correct wind noise level at the early vehicle design stages. The numerical simulations of aerodynamic wind noises around A-pillar and wiper were developed for specific vehicle exterior designs, but could not be directly used for the discussions with designers because these need complex modeling and simulation process. This study proposes new approach to A-pillar and wiper wind noise estimation at design stage using response surface methodology of modeFRONTIER, of which database is composed of PowerFLOW simulation, PowerCLAY modeling, SEA-Baced (Statistical Energy Analysis-Based) interior noise simulation, and turbulent acoustic power simulation. New design parameters are defined and their contributions are analyzed. A state-of-the-art, easy and reliable CAT (Computer Aided Test) tool for A-pillar and wiper wind noise are acquired from this study, which shows high usefulness in car development.

• Nuclear Medicine and Molecular Imaging
• /
• v.43 no.5
• /
• pp.443-450
• /
• 2009

Purpose: Conventional image reconstruction uses simplified physical models of projection. However, real physics, for example 3D reconstruction, takes too long time to process all the data in clinic and is unable in a common reconstruction machine because of the large memory for complex physical models. We suggest the realistic distributed memory model of fast-reconstruction using parallel processing on personal computers to enable large-scale technologies. Materials and Methods: The preliminary tests for the possibility on virtual manchines and various performance test on commercial super computer, Tachyon were performed. Expectation maximization algorithm with common 2D projection and realistic 3D line of response were tested. Since the process time was getting slower (max 6 times) after a certain iteration, optimization for compiler was performed to maximize the efficiency of parallelization. Results: Parallel processing of a program on multiple computers was available on Linux with MPICH and NFS. We verified that differences between parallel processed image and single processed image at the same iterations were under the significant digits of floating point number, about 6 bit. Double processors showed good efficiency (1.96 times) of parallel computing. Delay phenomenon was solved by vectorization method using SSE. Conclusion: Through the study, realistic parallel computing system in clinic was established to be able to reconstruct by plenty of memory using the realistic physical models which was impossible to simplify.

• Journal of the Korea Computer Graphics Society
• /
• v.26 no.3
• /
• pp.49-59
• /
• 2020

In this paper, we propose a speech animation synthesis specialized in Korean through a rule-based co-articulation model. Speech animation has been widely used in the cultural industry, such as movies, animations, and games that require natural and realistic motion. Because the technique for audio driven speech animation has been mainly developed for English, however, the animation results for domestic content are often visually very unnatural. For example, dubbing of a voice actor is played with no mouth motion at all or with an unsynchronized looping of simple mouth shapes at best. Although there are language-independent speech animation models, which are not specialized in Korean, they are yet to ensure the quality to be utilized in a domestic content production. Therefore, we propose a natural speech animation synthesis method that reflects the linguistic characteristics of Korean driven by an input audio and text. Reflecting the features that vowels mostly determine the mouth shape in Korean, a coarticulation model separating lips and the tongue has been defined to solve the previous problem of lip distortion and occasional missing of some phoneme characteristics. Our model also reflects the differences in prosodic features for improved dynamics in speech animation. Through user studies, we verify that the proposed model can synthesize natural speech animation.

• Journal of radiological science and technology
• /
• v.29 no.1
• /
• pp.47-52
• /
• 2006

This study analyzed the correlations between variables like characteristics related to admission, academic achievement, obtainment of a radiological technology license. A majority of participants were from Daegu and academic high schools. Many participants were accepted by general admission selection, and their reason to apply to Daegu Health College was high graduate employment. Their selection for the academic program was made by their parents and themselves. Those who took the same course twice held 35.1%, and those who got an academic warning took 8.5%. The degree of participants' academic achievement showed somewhat low, and they had difficulty in taking their major courses. The average grade for admission was lower in a following selection order: college graduates, general, special, and rural areas. The admission selections and taking science courses in high school showed little significant correlations with obtainment of a radiological technology license. However, the obtainment of the license had significant correlations with retaking the same course, getting an academic warning, and the degree of academic achievement. The results also revealed that the obtainment of the license had little significant correlations with a part-time job experience, having a boy/girlfriend, and student club participation, but it had significant correlations with accommodations and study club participation. In conclusion, it is important to point out that radiological technology graduates' obtainment of a license is closely related with the degree of their academic achievement and their college life.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.1100-1109
• /
• 2022

Herein, a case study was conducted on the bilge pumping performance of a 24,000TEU class container ship with an overall length of 400m. Although the bilge system of the 24,000TEU class container ship was designed in accordance with the rule requirements of the Classification Society, the bilge system did not satisfy the 2 m/s requirements of SOLAS Reg.II-1/35-1 under the rated flow rate and maximum flow rate conditions of the bilge pump installed in the ship. In particular, assumptions were made that No.1 ~ No.4 cargo holds were flooded and filled entirely by sea water and the evaluation of bilge pumping performance had been performed for No.1 ~ No.4 cargo holds. According to the evaulation results of the, the mean water velocity at the main bilge pipe for No.2, No.3, and No.4 cargo holds did not meet the 2 m/s criterion. To resolve this problem, in this study, the branch bilge pipe in each cargo hold was changed from 150A to 200A and the mean water velocity at the main bilge pipe for No.2, No.3, and No.4 was calculated as 2.479m/s, 2.476m/s, and 2.459m/s, respectively.

• Journal of The Korean Association For Science Education
• /
• v.42 no.2
• /
• pp.227-238
• /
• 2022

One of the main roles of the science teacher is to help students become active agents in their learning of science. This study described how an elementary science teacher used students' emotional resources to conduct emotionally responsive teaching and what were the learning outcomes of this approach. The participants of the study included the teacher himself and his 6^th grade students, and emotionally responsive teaching was applied in the science unit of 'Various Living Things and Our Human Lives'. Multiple types of data, including the teacher's teaching logs, video recordings of the lessons in the unit, and interviews with the students, were collected. The data were analyzed qualitatively, and the results were described using a self-study method. The teacher took advantage of three kinds of students' emotional resources (i.e., character drawing, t-shirt design, and raps) to organize his emotionally responsive teaching. The learning outcome included the students' positive emotions and active participation in science lessons, their epistemic practices such as explorations and justifications of knowledge, and the students' reconstruction of knowledge in consideration of their everyday lives. It was suggested that emotionally responsive teaching can promote elementary school students' active participation in science learning, resulting in meaningful learning outcomes in emotional, cognitive, and conceptual aspects. Further studies should thus be conducted to understand the characteristics of emotionally responsive teaching and its detailed teaching strategies.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.4
• /
• pp.379-390
• /
• 2022

While the construction industry is striving to make changes suitable for the 4th industrial revolution era through the introduction of 4th industrial revolution technologies, such change is progressing more slowly than in other industries. Nevertheless, the recent digitization and digital transformation of the construction industry can provide a new paradigm to address and innovate the chronic problems faced by the construction industry. Therefore, in this study, a case study using a data hub and API for use of the data hub, which is essential for digitalization and digital transformation, was conducted, and the efficiency and feasibility of using the data hub and API were considered. When the API system was introduced, it was found that the average budget savings per person was about 23%, and the costbenefit ratio was about 4.4 times higher, indicating that the feasibility of the project was very high. The results and framework of this study can serve as fundamental research data for related research, and provide a worthy case study to promote the introduction of related technologies. This will ultimately contribute to digitalization and digital transformation for smartization of the construction industry.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.5
• /
• pp.289-296
• /
• 2009

All over the world more and more attention is being paid to green management which enables environment-friendly sustainable development. To keep up with these global trends and in response to the government's "low carbon green growth" policy, many efforts are being made in the port and logistics in order to drastically reduce carbon emissions and save operating expenses. To this end, the engine power source of the cranes in the container terminal is being replaced with electricity from fossil fuel. Among those cranes, especially e-RTGC has been proved to be practical and excellent in its performance through many previous studies. However, no empirical study has yet been made on its introduction effects when e-RTGC has been introduced to the container terminal. In the meantime, however, many domestic container terminals have introduced e-RTGC, and so some data have been accumulated for further research. Under these circumstances, this study has tried to make an empirical study through the case study of D container terminal, checking the restriction factors to be considered at the time of eURTGC introduction, and analyzing its introduction effects and problems. We have high expectations that this study will provide key consideration factors and empirical analysis data to the decision makers who plan to introduce an e-RTGC system, and also will be used as a reference to the development direction of e-RTGC.

• Information Systems Review
• /
• v.25 no.4
• /
• pp.183-204
• /
• 2023

Due to the COVID-19 pandemic, lots of occasions need to be held in online environment. This is the reason why "Metaverse" gets lots of attention in 2021. A number of companies made announcements on Metaverse, and this situation also boomed stock market. This paper investigates the relationship between Metaverse initiatives and business value of the firm (i.e., stock prices). We examine this relationship by using event study method with Lexis-Nexis News data from 2019 to 2021. The results indicate that Metaverse initiatives significantly impact positive influence on firm's value. In the technological perspective, technical factors affect more positive market returns, including Metaverse enablers (e.g., NFT, VR devices, digital twin) and common infrastructure (e.g., semiconductor, AI, cloud), and especially virtual environment was emphasized. Additionally, in the strategical perspective, radical innovation (e.g., pivoting, acquisition) impact more positive market return rather than incremental innovation (e.g., partnership, investment). Also, firms from non-service industries can achieve benefits from Metaverse initiatives rather than service industry in some degree.