• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.276-281
• /
• 2002

본 연구에서는 정밀 쇄미 선별 시스템을 개발하기 위하여 원통형 홈 쇄미 선별기의 시작품을 제작하고 이것의 설계인자와 운전인자에 따른 성능 분석을 수행한 결과는 다음과 같다. 1. 원통형 홈 쇄미 선별기의 시작품은 홈의 직경이 작은 선별원통을 상단에, 홈의 직경이 큰 선별원통을 하단에 장착하는 2단형으로 설계 제작하였다. 각 단의 trough에는 스크류 컨베이어를 설치하였으며, 원통의 회전 속도와 trough의 각도 및 원통의 수평각을 변경시킬 수 있도록 하였다. 홈의 크기가 작은 상단에서 쇄미를, 홈의 크기가 큰 하단에서 준완전립을 선별하도록 하였다. 2. 원통형 홈 쇄미 선별기의 원통 회전속도가 증가하면 처리 용량이 증가하며, 이 속도에 따른 최적의 trough 각이 존재하는데, 본 실험에서는 회전 속도 35rpm에서 trough 각 37$^{\circ}$, 45rpm에서 55$^{\circ}$, 55rpm에서 73$^{\circ}$로 분석되었다. 3. 원통형 홈 쇄미 선별기의 공급율이 증가할수록 선별효율과 수거율(준완전립+쇄미)은 급격히 감소하지만, 순도(준완전립+쇄미)는 완만히 증가하였고, 완전립의 수거율과 순도는 95%이상을 유지하며 일정한 경향을 보였다. 본 실험 범위에서는 원통형 홈 쇄미선별기의 선별효율은 각 공급율에서 공히 원통의 분당 회전수 35rpm, trough 각 37$^{\circ}$에서 최대치를 나타내었다. 이 최적 조건에서 공급을 400-800kg/h 범위의 선별효율 평균치는 70% 정도로 분석되었다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.29-34
• /
• 2002

주요 결과를 요약하면 다음과 같다. 가. 벼 종자, 상토, 흔합 접착액 등 펠렛재료를 스크류 컨베이어에 의해 회전 성형롤에 공급, 압축성형 배출함으로써 직경 12 mm의 구형 벼 펠렛종자를 제조할 수 있는 벼 펠렛종자 제조장치를 설계·제작하였다. 나. 설계·제작된 벼 펠렛종자 제조장치의 제조능력은 시간 당 약 13,000 개 ∼ 37,000 개인 것으로 나타났고 이때 성형률은 약 61% ∼ 71%였다. 하지만 벼 종자 손실률은 약 17% ∼ 48%로 매우 큰 것으로 나타나, 펠렛재료의 손실과 종자손상을 줄이기 위한 성형롤 및 펠렛재료 공급장치의 개선이 필요한 것으로 보인다. 다. 제조된 펠렛종자의 무게는 제조 직후에는 1.66 g, 완전 건조 후에는 약 1.3 g으로 나타났으며, 제조된 펠렛종자의 직경은 약 12.0 mm에서 건조 후 약 11.2 mm로 축소되었다. 라. 제조된 한 개의 벼 펠렛종자 내 포함된 벼 종자의 개수는 상토와 벼 종자의 혼합비에 따라 다르게 나타났는데 혼합비 6 : 1에서 펠렛종자 당 종자 개수는 4.1 립, 혼합비 7 : 1에서 3.6 립, 그리고 혼합비 8 : 1에서는 3.1 립으로 나타났다. 마. 건조 후 벼 펠렛종자의 압축강도를 측정한 결과 건조기를 이용한 경우는 118 N ∼ 137 N, 음지 건조의 경우는 88 N ∼ 108 N으로 조사되었으며, 대체적으로 운반 및 파종 과정에서의 취급성은 문제가 없을 것으로 보인다.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.31 no.2
• /
• pp.56-63
• /
• 2022

The mandibular 4 anterior incisor restoration has small teeth and a small space, so the choice of abutment is always a concern. The mandibular 4 anterior incisor extraction is caused by periodontal disease, interdental embrasure greatly open is advantageous of oral hygiene management. Try to make it small diameter with custom abutment, it is limited to the space for the screw. Rather than setting the post site of one body implant to a horizontal cross-section, it is advantageous to set it to a longitudinal cross-section, for interdental embrasure formation. When using an internal bone level implant, rather than using a two-piece abutment, using a one-piece abutment can more effectively secure space for interdental embrasure.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.1
• /
• pp.71-80
• /
• 2013

Before and after the test constructions, and after an 11-month hiatus from the pilot pile installations, the in-situ tests (CPT, SPT) were carried out at the ground adjacent to the noise- and vibration-free screw concrete piles installed by 2 kinds of construction methods (i.e., the toe-jetting shoe type, the pre-digging type). In the toe-jetting shoe type construction methods, after construction, the soil strength within 3.5D (where, D = pile diameter) from the pile center decreased greatly by about 46% of the original ground and, after an 11-month hiatus, a strength recovery adjacent to the piles appeared about 71% of the original ground. In the pre-digging type construction methods, a strength recovery adjacent to the piles appeared 100% of the strength of the original ground.

• Journal of Animal Environmental Science
• /
• v.11 no.3
• /
• pp.153-160
• /
• 2005

This study was conducted to determine the effect of floor type of finishing building and increasing market weight of finishing Pigs on Performance, carcass traits and pork quality. Four hundred and forty-four finishing pigs were confined and administered with different floor type(concrete slat and bedded with sawdust) and increasing market weight(110kg to 130kg) of finishing building. The result obtained from this study were summarized as follows; 1. There was no significant difference between the floor type of finishing building in the body weight gain, feed intake and gain per feed. And also increasing market weight of finishing pigs was not affected the performance of finishing pigs. 2. Increasing market weight of finishing pigs affect the carcass yield. The market weight at 130kg showed more amount of each cut of carcass, especially the belly portion was higher, but backfat thickness was not different. 3. Carcass traits did not show any significant difference due to the difference of market weight of finishing pig and floor type of finishing building. 4. There was no significant difference in the chemical compositions and meat color of pork loin between the floor type of finishing building and increasing market weight of finishing pigs.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.6
• /
• pp.20-31
• /
• 2005

Three dimensional Monte-Carlo simulations of non-ergodic transport of a lion-reactive solute plume by steady-state groundwater flow under a uniform mean velocity in isotropic heterogeneous aquifers were conducted. The log-normally distributed hydraulic conductivity, K(x), is modeled as a random field. Significant efforts are made to reduce tile simulation uncertainties. Ensemble averages of the second spatial moments of the plume and plume centroid variances were simulated with 1600 Monte Carlo runs for three variances of log K, ${\sigma}_Y^2=0.09,\;0.23$, and 0.46, and three dimensionless lengths of line plume sources normal to the mean velocity. The simulated second spatial moment and the plume centroid variance in longitudinal direction fit well to the first order theoretical results while the simulated transverse moments are generally larger than the first order results. The first order theoretical results significantly underestimated the simulated dimensionless transverse moments for the aquifers of large ${\sigma}_Y^2$ and large dimensionless time. The ergodic condition for the second spatial moments is far from reaching in all cases simulated, and transport In transverse directions may reach ergodic condition much slower than that in longitudinal direction. The evolution of the contaminant transported in a heterogeneous aquifer is not affected by the shape of the initial plume but affected mainly by the degree of the heterogeneity and the size of the initial plume.

• Journal of Veterinary Clinics
• /
• v.22 no.4
• /
• pp.328-335
• /
• 2005

The objective of this study was to evaluate tire effects of modified triple pelvic osteotomy(TPO). The procedures of modified TPO were composed of two iliac osteotomies and a pubic symphysiotomy at a tittle. Medical records of modified TPO treatment on 36 dogs and of unilateral TPO on 7 dogs were reviewed on the basis of signalment, body weight, operation time, Healing time of osteotomy sites and complications from October 2002 to September 2004. The values of clinical status and hip dysplasia, Norberg angle, percentage of femoral head coverage and pelvic diameter from radiographs taken preoperative, immediately postoperative, 2, 4, 8, 12 and 24 weeks after operation, respectively, were measured. In .unilateral TPO, the dogs could start standing without assistance from $3.0\pm1.0days$ and walking from $8.3\pm0.6days$ (n=3). Mean clinical grade before and 24 weeks after surgery were $2.2\pm0.42$(n=6) and $3.5\pm0.7$ (n=2), respectively. Mean operation time was $107.3\pm38.9$ minutes (n=4). In modified TPO, the dogs were seen to staff standing without assistance from $4.9\pm3.7$ days and walking from $7.3\pm4.8days$ (n=25). Mean clinical grade before surgery and 24 weeks after surgery were $2.3\pm1.5$ (n=27) and $3.2\pm0.7$)(n=9), respectively. Postoperative clinical grade significantly improved against preoperative clinical grade (P<0.01). Mean operation time was $143\pm42.8$ minutes (n=24). This was shorter than time f3r twice unilateral TPO. By comparison with preoperative values, postoperative mean radiographic grade, percentage of femoral head coverage and Norberg angle measured at the recheck time point significantly increased (P<0.01). Mean postoperative pelvic diameter was significantly larger than preoperative pelvic diameter in modified TPO (P<0.01) but not in unilateral TPO. These results indicated that modified TPO was effective technique for the treatment of hip dysplasia in dogs.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.78-78
• /
• 2017

현재 국내에 공급되고 있는 잡곡류 수확기는 보행형 예취기, 탈곡기 위주의 저능률 기계화 수준으로 고능률의 콤바인 수확기 개발이 필요하며, 특히 잡곡류가 소규모 경작지의 영세농가 위주로 재배되어 저가격의 소형 콤바인 수확기 개발이 절실히 요구되고 있다. 따라서 본 연구는 소규모 밭의 두류 및 잡곡 수확작업에 적응성이 뛰어나며, 농기계 임대사업소의 활용도를 높일 수 있고, 여성과 고령자도 쉽게 운전할 수 있어 수확작업의 노동력을 크게 절감할 수 있는 저가격의 25kW급 자주식 소형 콤바인을 개발하고자 시작기를 설계 제작하였다. 시작기의 주요부로 엔진은 25kW/2600rpm 3기통 디젤엔진을 탑재하였으며, 동력전달부는 주변속 3단, 부변속 2단의 선택맞물림 기어식의 변속장치를 이용하였다. 주행부는 궤도형으로 조향클러치와 습식 원판식 제동장치를 채용하였다. 전처리부는 선단거리 1700 mm의 디바이더와 상하좌우 수동 조절되는 회전속도 약 42 rpm의 정오각형 릴로 구성하였으며, 전처리부의 최대 승강높이는 740 mm이었다. 작물이송부는 돌기부착 오거와 체인컨베이어로 구성되어 있으며, 탈곡부는 단동형 축류식의 직경 440 mm, 길이 1180 mm의 급동과 높이 65 mm, 지름 10 mm의 46개 강봉형 급치, 격자형 수망으로 구성하였으며, 회전속도는 약 325 rpm으로 작동하도록 하였다. 선별 정선부는 요동 송풍선별식으로 곡립판, 볏짚체, 곡립체, 송풍팬으로 구성하였고 송풍팬의 회전속도는 약 850 rpm, 요동진동수는 약 5.8 Hz로 작동하도록 하였다. 곡물이송부와 재처리부는 수평이송 외경 103 mm, 수직이송 외경 110 mm의 피치가 모두 82 mm인 스크류컨베이어를 이용하였으며, 곡물탱크는 용량이 250 로 2개의 배출구로 곡물을 포대에 담도록 하였다. 그 외 시작기는 운전조작부, 유압장치부, 전기장치부 등을 갖도록 설계 제작하였다. 전체적인 기체의 크기는 길이${\times}$폭${\times}$높이 $3935{\times}1900{\times}2440mm$이었으며, 기체 중량은 약 1753 kg이었다. 콩 대상 기초 성능시험 결과 시작기의 작업속도는 약 0.5 m/s, 작업능률은 약 11 a/h로 나타났다.

• Korean journal of applied entomology
• /
• v.45 no.1 s.142
• /
• pp.75-78
• /
• 2006

Development of pellet-type artificial diet for insect was tried by using a twin screw extruder(TSE). Screws were arranged several times and two reverse screws were equipped on the foreparts of 2 axes of TSE. Pellet-type diet could be produced successfully under conditions of TSE set as the following. : 300 rpm of main motor speed, 228 rpm of feed motor speed, $75m{\ell}/min$ of running water speed and 5 mm of extrusion diameter. The optimum adding quantity of water to the manufactured diet was $1.2{\sim}1.5$ times of dry diet. On the rearing results of beet armyworm, Spodoptera exigua and common cutworm, Spedoptera litura with the pellet-type diet, the final survival ratio (emergence rate) of these two species was over than 50%, and so it was concluded that the manufactured pellet-type artificial diet was sufficient dietetically to rear those insects.