• 한국의류산업학회지
• /
• 제10권5호
• /
• pp.660-667
• /
• 2008

The purpose of this study was to modify a Flared Skirt for women according to the somatotype of lower body. The subjects for the wear test were 3 students, who were in $mean{\pm}1{\sigma}$ each somatotype. The results of this study are as follows: First, the Flared Skirt pattern was modified according to each type. The front waist line rising measurement proposed for type 1 and type 2 were 0.5cm, because of lower front silhouette with waist shape. The back waist line rising measurement proposed for type 2 was 1cm and type 3 was 0.5cm, because of lower back shape with hip. Second, the wave-height of nodes were regular at front and back in type 1. Also, the wave-height of nodes were evenly distributed side and center. The variation ratio of wave-height of back nodes were lower than existing pattern in type 2 and type 3. It means the variation ratio of wave-height of back nodes were regular in modification pattern. Altogether, modification patterns were more regular and lower than existing pattern in the number of nodes, the distribution ratio of nodes, the wave-height of node, the variation ratio of wave height of nodes.

• 복식문화연구
• /
• 제14권2호
• /
• pp.271-285
• /
• 2006

The purpose of this study was to develop a new basic skirt pattern for 4 lower body types of Plus-sized women. To reduce a time and economic loss about putting it on, This study applied a 3D sample module in the course to develop a basic skirt pattern which is fit, functional and beautiful. A data analysis used the SPSS 11.0 statistics program. To verify the difference, This study used the variance analysis and Duncan's test for the postmortem verification. The result was as follows. To reflect a feature according to an abdomen projection and hip projection, we added the maximum hip circumference to the waist circumference and hip circumference for necessary for a skirt draft item. The front hip circumference sets to the H/4+1cm(ease)+D/4. The back hip circumference set to the H/4+0.5cm(ease)+D/4. The D is the hip circumference in the maximum hip circumference to subtract. The front waist circumference sets to the W/4+0.5cm(ease)+0.5cm(A front and back's difference)+D/4. The back waist circumference sets to the W/4+0.5cm(ease)-0.5cm(A front and back's difference)-D/4. Compare with 4 lower body types of Plus-sized Women, A type 2 and type 4 abdomen projections are bigger. We raised a front waistline of skirt pattern to a 0.3cm upside, and take about 1.3cm down the skirt length from a developed skirt pattern. Consequently, the appearance of a front skirt length was improved with a side skirt length.

• 복식문화연구
• /
• 제22권4호
• /
• pp.543-554
• /
• 2014

The purpose of this study was to find whether hemline cycles exist and whether hemlines show greater within-year variability over time. Utilizing US Vogue data from 1950 to 2013 on hemline length of women's daywear, total 2102 day-dresses or skirts on full fashion pictures were analyzed. The skirt length was divided by the total length of figure in the picture which was measured from shoulder to ankle. Aggregated yearly means smoothed by means of three-point moving averages were used to provide a better indication of the long-term direction of movement of the hemline. Within-year hemline variability was smoothed by the way of three-point moving average as well. The data showed five cycles on hemline change processes. The first cycle took 21 years from 1950 to 1971, which was the longest period and had the biggest hemline changes. The second cycle was the shortest from 1971 to 1977, in which hemline moved between below-knee length and midcalf. The hemline in the third cycle moved between midcalf and miniskirt. The third cycle took 16 years from 1977 to 1993. The forth was a short cycle from 1998 to 2001, and hemlines moved moderately between below-knee length and above-knee length. The fifth cycle has been on going since 2001, and the hemline has been getting longer after 2007. The within-year variability of hemlines was bigger in 1980s than previous years and was steadily increased.

• 한국의류학회지
• /
• 제34권7호
• /
• pp.1111-1125
• /
• 2010

Study is a basic analysis of a future virtual clothing system based on a comparative analysis of all the shirring, using a 3-dimensional apparel cad system. Frilled skirts shirred at the lower hemline were the subject of this study for a comparison of expression and shape of shirring. It compared the silhouette and details expressed in virtual and real skirts made of woolen fabrics and polyester satin, with different widths (1.5, 2 and 2.5 widths). It was found that the virtual skirt could not express shirring as exquisitely as the real skirt due to fabric thickness and other fabric characteristics. In addition, the increase in widths caused the frill shape to deform badly. In the case of a virtual skirt made of polyester satin, the increased multiplication factor let the frill spread out sharply (unlike the real skirt). Simulated skirts of polyester satin and woolen spread out to the sides with the sidelines of their frills hanging down markedly (unlike the real cloths) when the frills changed from 1.5 widths to 2 widths. When it came to the virtual skirt, side-line from the hip down all the way short of frill contorted with the wrinkle multiplication factor of 2 and 2.5 widths. This phenomenon was more notable in polyester satin skirts than in woolen skirts.

• 전자공학회논문지D
• /
• 제36D권12호
• /
• pp.11-20
• /
• 1999

직접 결합과 사이 결합을 이용하여 신호를 인가하는 두 가지 경우의 마이크로스트립 헤어핀 콤 여파기를 직경 50 mm, 두께 0.5 mm인 하나의 $LaAlO_3$ 기판 위에 양면 증착한 YBCO 박막을 이용하여 설계 제작하였다. 두 가지 헤어핀 콤 여파기 모두 중심 주파수가 1.773 GHz 이였고, 대역폭이 12 MHz 이었으며, 통과 대역에서 최소 삽입 손실이 0.5 dB 이었고, 저지 대역에서는 매우 강한 반사 손실 특성을 지니고 있었다. 직접 결합 헤어핀 콤 여파기는 통과 대역 아래쪽과 위쪽에 감쇠 폴이 생겼으나, 사이 결합 헤어핀 콤 여파기는 통과 대역 아래쪽에서만 감쇠 폴이 존재하였다. 따라서 직접 결합 헤어핀 콤 여파기가 사이 결합 헤어핀 콤 여파기에 비해서 더 좋은 스커트 특성을 보여주었다.

• 대한전자공학회논문지TC
• /
• 제46권12호
• /
• pp.59-64
• /
• 2009

본 논문을 통하여 Metamaterial 특성을 가지는 CRLH 전송선 구조를 이용하는 초광대역 대역저지 여파기의 설계를 제안한다. 기존에 사용되던 주기구조, 또는 다단의 CRLH 전송선이 아닌, 단일 쎌 구조를 이용하여 기존 반파장 공진기 기반의 여파기나 임피던스 교번형 저역통과 여파기 등에서 나타나는 길이가 길어지며 Chebyshev형의 낮은 스커트 특성을 가지는 단점을 보완하고, 기존에 없던 초소형 구조를 제시한다. 또한, 초광대역 저지특성을 위하여 계단형 임피던스 구조를 포함한 강결합 Metamaterial 구조를 제안하고 0차 공진을 이용한 초소형화 기법을 제시한다. 본 논문에서 제안하는 설계의 타당함은 3D EM 모의실험과 제작 및 측정을 통하여 검증하며 여파기의 크기를 ${\lambda}_g/10$ 이하로 감소, 12 GHz를 초과하는 차단대역, 통과대역의 0.7 dB 삽입손실 등의 주파수 영역 특성 결과를 보인다.

• 한국전자파학회논문지
• /
• 제17권12호
• /
• pp.1199-1205
• /
• 2006

본 논문은 두 개의 대역 저지 반파장 슬롯을 방사체에 삽입하여, 향상된 대역 저지 특성을 갖는 보우타이형 광대역 모노폴 안테나를 제안하였다. 제안된 안테나는 전자기적으로 급전된 보우타이 형태의 방사 평면과 접지면 사이에 반원 모양의 기생 접지면을 추가한 구조이다. 향상된 대역 저지 특성을 얻기 위하여 두 수평 슬롯간의 결합량을 조절하였다. 측정된 안테나는 $4.96{\sim}5.51GHz$에서 저지 특성을 갖고, $2.7{\sim}6.9GHz$에서 정재파비 2.0 이하를 만족하는 광대역 특성을 나타내었다. 단일 슬롯 사용과 비교하면, 넓은 저지 대역폭과 향상된 스커트 특성을 나타내었다. 측정된 안테나의 방사 패턴은 이상적인 모노폴 안테나와 유사한 특성을 가지며, 저지 대역에서의 안테나 이득은 다른 동작 주파수에 비해 x-z 평면을 기준으로 $5{\sim}10dB$ 이상 감소되었다.

• 한국전자파학회논문지
• /
• 제18권8호
• /
• pp.913-921
• /
• 2007

본 논문에서는 새로운 구조의 방향 탐지용 소형 안테나를 제안하였다. 제안한 안테나는 800 MHz 이상의 고주파 대역에서도 안테나의 복사 패턴이 일그러지지 않도록 끝이 구부러진 스커트 모양의 디스크가 연결되었으며, 200 MHz 이하의 저주파 대역에서 증폭기와의 임피던스 매칭이 가능하도록 다단 구조의 매칭 스터브가 삽입되었다. $20{\sim}700 MHz$에서 제안된 안테나는 60cm 다이폴 안테나에 비해 크기가 1/2로 축소되었음에도 불구하고 유사한 성능을 가진다. 또한, 다이폴 안테나와 달리 $700{\sim}1,300 MHz$에서 복사 패턴이 크게 일그러지지 않고 주 빔 방향으로 널이 발생하지 않으며 넓은 빔 폭을 가진다.

• 대한가정학회지
• /
• 제31권3호
• /
• pp.175-186
• /
• 1993

The present study was designed to find out the construction conditions of tight skirt for sale in relation to its brand, target age and length. The 15 tight skirts each from 3 brand groups(designer character, national and minor brand) of 2 target age groups(youth and middle age) and the 15 tight skirts each from 3 skirt length groups(mini, natural line and maxi) of only the minor brand-a total of the 120 tight skirts on the market-were measured. The data were analyzed with use of SAS package. The statistics were based on frequency, percentage, average, standard deviation, one-way ANOVA, two-way ANOVA, Pearson's correlation and linear regression analysis. The main results were as follows. 1. There were significant differences in the construction conditions of tight skirt according to its brand and target age. There was a significant difference particurarly in the difference between hip girth and hem girth according to brand target age. The difference between hip girth and hem girth of designer's character brand skirt was larger than that of national brand & minor brand skirt, and that of skirt targeting the youth was larger than that of skirt targeting the middle aged. 2. There were significant difference particurarly in the differences in the construction conditions of tight skirt according to its length. There was a significant difference particurarly in the difference between hip girth and he girth according to skirt length, and that of maxi skirt was larger than that of mini & natural line skirt. There was a good correlation between skirt length and slit length and between skirt length and skirt length above the slit. The longer the skirt length was, the longer the slit length and the skirt length above the slit were.

• 한국의류산업학회지
• /
• 제13권5호
• /
• pp.661-671
• /
• 2011

This study was designed to produce rounded belt pattern and tight-skirt pattern drafting method using 3D body scan data. Subjects were thirty women in their early twenties. In order to figure out the optimum cutting points, namely, where darts are made, using CAD program, curve ratio inflection points on the horizontal curve of waist, abdomen, and hip to find 1 point in the front, two points in the back part. The average length from center front point to maximum curve ratio was 7.7 cm(46.3%) on the waist curve; 7.9 cm(39.4%) on the abdomen curve. And the average length from center back point to maximum curve ratio point was 6.9 cm(39.0%) for first dart and 11.2 cm(63.3%) for second dart on the waist curve; 8.9 cm(35.8%) for first dart and 15.7 cm(63.3%) for second dart on the hip curve respectively. The cutting lines from were made up by connecting curve inflection points. After divided using cutting lines, each patch was flattened onto the plane and all the technical design factors related with patternmaking were measured, such as dart amount, lifting amount of side waist point, etc. Based on the results of correlation analysis among these factors, regression analysis was done to produce equations to estimate the variables necessary to draw up pattern draft method; F1=F8+1.1, $F4=2.5{\times}F2+0.9$, $F5=0.9{\times}F4+1.0$, $F6=0.3{\times}F4+0.4$, $B1=0.9{\times}B8+2.3$, $B4=2.1{\times}B2+1.3$, $B5=0.9{\times}B4+3.5$, and $B6=0.3{\times}B4+0.4$.