• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.3
• /
• pp.274-284
• /
• 2003

Multi-level converter that is high-capacity electric power conversion system is used widely to electric motor drive system and FATCs(Flexible AC Transmission Systems). H-Bridge converter has been prevalently applied to shunt-type system because it can be easily expanded to the multi-level. In steady states, converter is normally operated in the range of 0.7∼0.8 of modulation Index. Even though zero vectors are not imposed to high modulation index, DC-Link voltage Is constant. It means that converter has another boost vector except for zero vectors among several vectors in 3-level converter. This paper has examined the principle of boost vector and investigated the difference between another boost vector and zero vectors in 3-level converter. In addition, this paper has analysed and compared the charging currents and the capacitor voltages of two topologies. The currents and voltages are related to reference voltage. Therefore, it proposed the calculation method for the voltage ripple and the charging current of each capacitor and compared various DC-Link voltage control methods through the simulation.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.1
• /
• pp.1-8
• /
• 2002

The color interpolation scheme can play an important role in overcoming the physical limitation of the CCD image sensor and in increasing the resolution of color signals, while most conventional approaches result in blurred edges and false color artifacts. In this paper, we have proposed an improved edge-adaptive color interpolation scheme for a progressive scan CCD image sensor with RGB color filter array The edge indicator function proposed utilizes not only the within-channel correlation but also the cross-channel correlation, and reflects the edge characteristics of an image adaptively. The color components unavailable for at each channel are interpolated along the edge direction, not across the edges, so that aliasing artifacts are supressed. Furthermore, we eliminated false color artifacts resulting from the color image formation model in the edge-adaptive color interpolation scheme by adopting the switching algorithm based on the color edge detection. Simulation results of the proposed algorithm indicate that the improved edge-adaptive color interpolation scheme produces quantitatively better and visually more pleasing results than conventional approaches.

• Korean Journal of Optics and Photonics
• /
• v.28 no.6
• /
• pp.351-355
• /
• 2017

In this paper, we conduct a simulation of manipulating various pulsed laser operations through tuning the modulation depth of the saturable absorber in a laser cavity. The research, showing that various pulsed operations could be manipulated from Q-switching through Q-switched mode locking to mode locking by tuning the modulation depth of the saturable absorber in a cavity, has been studied by experimental means. We conduct a simulation with the Haus master equation to verify that these experimental results are consistent with expectations from theory. The time dependence of the gain was considered to express Q-switching fluctuation through applying a rate equation with the Haus master equation. Laser operation was manipulated from mode locking through Q-switched mode locking to Q-switching as modulation depth was increased, and this result agreed well with the theoretical expectation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.9
• /
• pp.940-946
• /
• 2015

In this paper, we study a method that amplifies the output gain of a high voltage pulse using 300 kHz or higher frequency. We conducted a study on a method for amplifying the output gain using the resonance between the capacitance components of the load and the parasitic components of the circuit, instead of the conservative method for amplifying the pulse-amplitude by raising the voltage of the power stage. In particular, the method simplifies the circuit configuration throughout the appliance of flyback-type topology instead of the bridge-type. There are advantages that prevent damage from overload and the heat in the output circuit through the hard switching by amplifying the gain of the output voltage applying to the load as given by the capacitance component of the output electrode to the output pulse waveform. This study proposed a method to enhance the spatial and electrical efficiency of the contact-type heating device through the dielectric heating method applied to the field of medical and industrial heating.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.3
• /
• pp.359-364
• /
• 2016

As cable TV networks have a media feature that is a broadband wire network, they can provide not only TV broadcasting services but also communication services. Accordingly, the cable TV network is mentioned as the optimal network for convergence of broadcasting and communication services. Recently, Available frequencies of the cable TV network have become insufficient as enhancement of video quality, increment of VoD service, and growth of high-speed internet service. This paper presents a new implementation method of switched digital video (SDV) technology that is introduced for obtaining additional frequency band. In the SDV system, only TV channels requested from viewer are sent and non-requested channels are dropped. The presented SDV uses a sharing method of TV broadcasting and communication service in a same frequency band. This method shows increase of spectrum efficient from switching of TV service channels without building a complex system.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.403-404
• /
• 2013

최근 scaling down의 한계에 부딪힌 DRAM과 Flash Memory를 대체하기 위한 차세대 메모리(Next Generation Memory)에 대한 연구가 활발히 진행되고 있다. ITRS (international technology roadmap for semiconductors)에 따르면 PRAM (phase change RAM), RRAM (resistive RAM), STT-MRAM (spin transfer torque magnetic RAM) 등이 차세대 메모리로써 부상하고 있다. 그 중 RRAM은 간단한 구조로 인한 고집적화, 빠른 program/erase 속도 (100~10 ns), 낮은 동작 전압 등의 장점을 갖고 있어 다른 차세대 메모리 중에서도 높은 평가를 받고 있다 [1]. 현재 RRAM은 주로 금속-산화물계(Metal-Oxide) 저항 변화 물질을 기반으로 연구가 활발하게 진행되고 있다. 하지만 근본적으로 공정 과정에서 산소에 의한 오염으로 인해 수율이 낮은 문제를 갖고 있으며, Endurance 및 Retention 등의 신뢰성이 떨어지는 단점이 있다. 따라서, 본 연구진은 산소 오염에 의한 신뢰성 문제를 근본적으로 해결할 수 있는 다양한 금속-질화물(Metal-Nitride) 기반의 저항 변화 물질을 제안해 연구를 진행하고 있으며, 우수한 열적 안정성($>450^{\circ}C$, 높은 종횡비, Cu 확산 방지 역할, 높은 공정 호환성 [2] 등의 장점을 가진 WN 박막을 저항 변화 물질로 사용하여 저항 변화 메모리를 구현하기 위한 연구를 진행하였다. WN 박막은 RF magnetron sputtering 방법을 사용하여 Ar/$N_2$ 가스를 20/30 sccm, 동작 압력 20 mTorr 조건에서 120 nm 의 두께로 증착하였고, E-beam Evaporation 방법을 통하여 Ti 상부 전극을 100 nm 증착하였다. I-V 실험결과, WN 기반의 RRAM은 양전압에서 SET 동작이 일어나며, 음전압에서 RESET 동작을 하는 bipolar 스위칭 특성을 보였으며, 읽기 전압 0.1 V에서 ~1 order의 저항비를 확보하였다. 신뢰성 분석 결과, $10^3$번의 Endurance 특성 및 $10^5$초의 긴 Retention time을 확보할 수 있었다. 또한, 고저항 상태에서는 Space-charge-limited Conduction, 저저항 상태에서는 Ohmic Conduction의 전도 특성을 보임에 따라 저항 변화 메카니즘이 filamentary conduction model로 확인되었다 [3]. 본 연구에서 개발한 WN 기반의 RRAM은 우수한 저항 변화 특성과 함께 높은 재료적 안정성, 그리고 기존 반도체 공정 호환성이 매우 높은 강점을 갖고 있어 핵심적인 차세대 메모리가 될 것으로 기대된다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.5
• /
• pp.451-465
• /
• 1987

With the introduction of ISDN network, the D channel protocol has bee defined as a signalling method for ISDN user-network interface. Therefore the NT2(Network Termination 2) which carry out concentration and switching function, must process the D channel related information. This paper describes how the D channel protocoal is applied and implented in a small ISDN subscriber concentrating system that has NT2 functions. The application protocol proposed is addressed taking into consideration the compatibility with ISDN standard facilities, TE(Terminal Equipment) or ET(Exchange Terminator), This protocol has been implementes using a general multitask operating system and it has the features of the minimized information processing and the simpified algorithm which are suitable for a small system. Its application programs are divided into various tasks to facilitate the addition and the modification of function. In this paper, we briefly outline the protocol defined in CCITT and show the application protocol that has fitted in a small concentrating system with NT2 functions. Also we present the experimental results and implementation method of this protocol.

• Journal of Korea Multimedia Society
• /
• v.16 no.1
• /
• pp.75-86
• /
• 2013

This paper presents a technique to implement embedded systems using interrupts of the one-chip microcontroller with many peripherals based on a multiple finite state machines model. The multiple finite state machine model utilizes the structure of FSMD used for hardware design and the features of flow control by interrupts. The main finite state machine corresponds to the main program and the sub-state machines corresponds to the interrupt subroutines. Therefore, interrupts from the peripherals can be processed immediately in the sub-state machines. The request and reply variables are used to interface between the finite state machines. Additional operating system is not necessary for the context switching between the main state machine and the sub-state machine, because the flow-control caused by interrupt can be replaced with the switching. An embedded system modeled on multiple finite state machine with ASM charts can be easily implemented by the conversion of ASM charts into C-language programs. This implementation technique can be easily adopted to the hardware oriented embedded systems because of the detail description of the model and the fast response to the interrupt events in the sub-state machine.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.5
• /
• pp.537-543
• /
• 2006

There have been many recent studies on the nonlinear rainfall-runoff modeling, where the use of neural networks is shown to be quite successful. Due to fundamental limitation of linear structures, employing linear models has often been considered inferior to the neural network approaches in this area. However, we believe that with an appropriate extension, the concept of linear impulse responses can be a viable tool since it enables us to understand underlying dynamics principles better. In this paper, we propose the use of multiple impulse responses for the problem of rainfall-runoff analysis. The proposed method is based on a simple and fixed strategy for switching among multiple linear impulse-response models, each of which satisfies the constraints of non-negativity and uni-modality. The computational analysis performed for a certain Korean hydrometeorologic data set showed that the proposed method can yield very meaningful results.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.5
• /
• pp.927-934
• /
• 2019

Recently, mobile devices have evolved into small computers with various functions according to user requirements. Careful attention must be paid to the design of the power supply network for the stable operation of the application processor (AP), the wireless communication modem, the high performance camera, and the various interfaces of the mobile device to implement various functions of the mobile device. In this paper, we analyzed and verified the method of optimizing the design parameters such as the position, capacity, and number of decoupling capacitors to meet the target impedance required by the driver IC chip to ensure the stability of the power supply network of mobile devices that should be designed as wiring type due to mounting density limitation. The proposed wired power supply network design method can be applied to various applications including high-speed signal transmission line in addition to mobile applications.