• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.4
• /
• pp.1-8
• /
• 2005

Plasma researches using parallel-plate electrodes are widely used in semiconductor application such as etching and thin film deposition. Therefore, a quantitative understanding and control of plasma behavior are becoming increasingly necessary because their important applications and simulation techniques have been actively carried out in order to solve such problems above. In this paper, we developed a two-dimensional(2D) self-consistent fluid model, because 2D models can deal with real reactor geometries. The fluid model is based on particle continuity equations for taking account of an electrode system in a cylindrical geometry. An pure Ar gas was used at 500[mTorr] and radio-frequency (13.56(MHz)). Four models were simulated under the different electrode geometries which have chamber widths of 5.25, 6.0, 8.0, and 10.0[cm] and we compared their results with each other. Plasma uniformity and a do self-bias voltage were also discussed.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.1
• /
• pp.28-35
• /
• 2004

$N_2$ has been one of the most useful gases in industrial application, for example, plasma ashing, surface cleaning and decomposition of pollution gases. In order to clarify $N_2$ plasma properties and increase practical applications, many experimental and theoretical investigations have been carried out until now on. In this papa, we examined the characteristics of $N_2$ RF Plasmas using one-dimensional fluid model. $N_2$ plasmas showed a double-layer structure in both sheath regions as the power source voltage becomes higher. Generally, a double-layer structure should be showed in electro-negative plasmas, but not in electro-postive plasmas such as $N_2$ discharge. However, most electrons in $N_2$ plasmas lost their energy by many excitation reactions in the near of both electrodes where electron collisions were actively executed and such continuous reactions during an RF period made this structure strong with increase of the power source voltage. The dependence of $N_2$ plasma properties on pressure was also discussed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.1
• /
• pp.83-87
• /
• 2008

We have a lot of interest in alternative fuels to provide energy independence from oil producing country and to reduce exhaust emissions for air pollution prevention. Biodiesel, which can be generated from natural renewable sources such as new or used vegetable oils or animal fats, may be used as fuel without change of engine structure in diesel engine of compression ignition engine. In this paper, the test results on specific fuel consumption and exhaust emissions of neat diesel oil and biodiesel blends(10 vol.% biodiesel and 20 vol.% biodiesel) were presented using four stroke, direct injection diesel engine. Especially this biodisel was produced from rape oil at our laboratory by ourselves. This study showed that specific fuel consumption and NOx emission were slightly increased, on the other hand CO emission and Soot were tolerably decreased more in the case of biodiesel blends than neat diesel oil.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.5162-5168
• /
• 2013

Hopping sequences of Time Hopped Ultra Wideband Impulse Radio (TH-UWB-IR) system are to mitigate multipath fading and to provide the multiple access chances for multi users. For the reliable communications, the same pulses are repeatedly transmitted for a bit duration based on hopping sequences. The proposed decoding scheme utilizes the intervals of inter-codes in a frame where the short interval between two pulses leads to the large interference by the multipath fading. For a single user case, the proposed method obtains 0.5dB gain over the conventional method at BER=$10^{-3}$. Decoding performance of repeated pulses can be increased using the property of the hopping sequences of multi users.

• School Mathematics
• /
• v.13 no.3
• /
• pp.405-422
• /
• 2011

In this study, we consider the meaning of one-to-one correspondence through theoretical background under operation of matrix. On algebraic point of view, its significance is 'through one-to-one correspondence from a set with given structure, become a methods in order to induce an algebraic system in to a new set.' That is a key idea making isomorphic structure. Such process experiences necessity of mathematical fact, as well as the deep understanding of one-to-one correspon -dence. Also that becomes a base for develop a various mathematical concepts, such as matrix, exponential laws, symmetric difference, permutation and so on. This study help teachers and students to understand of mathematical concepts meaningfully and to facilitate teacher's professional development.

• Journal of the Korean Geosynthetics Society
• /
• v.8 no.1
• /
• pp.53-59
• /
• 2009

A new system of modified freeze-thaw testing apparatus is introduced. This system is developed to evaluate the geotechnical parameters and their dependence upon freezing-thawing history of frost-susceptibility soil. A necessary condition for stationary frost heaving is clarified in this paper. The method changes the thermal boundary condition up to the net heat flow at the freezing frost becomes zero. The effectiveness of this method is verified by freeze-thaw tests. Frost heaving observed after the application of the method is found to be due to another frost heaving action called long-term frost heaving. This frost heaving has already been studied and is considered ignorable as engineering factor because of its small heaving amount.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.12A
• /
• pp.1286-1295
• /
• 2007

This paper proposes, based on a bandpass sampling theory, a novel method to find valid sampling frequency range and minimum sampling rate with low computational complexity for downconversion of N bandpass radio frequency(RF) signals, under application of all possible signal placements(full permutations) in a IF stage. Additionally, we have developed a complexity-reducing method to obtaine the opttimal and minimal sampling rate for supporting the user-wanted guard-band or spacing between adjacent downconverted signal spectrums. Moreover, we have verified through comparisons with other methods that the proposed methods have more advantageous properties.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.8A
• /
• pp.763-770
• /
• 2002

Recognition of CW Morse signals can be divided into several phases such as detection of tones and spaces, signal processing for removing noise from detected signals, decision of tones/spaces, mapping a sequence of tones and spaces into characters, error correction of a character message with textual repetition. In this paper, in order to cope with signal fading effectively we propose a signal detection method of identifying peaks in the frequency domain and present techniques for combining multiple frequency peaks and for removing residual signal components and noise. LMS adaptive method is applied for decision of tones/spaces, and initial value setting and malfunctioning conditions are analyzed. In recognition experiments, we used CW Morse signals collected by radio receivers and found that the proposed method achieves good recognition performance even in severe fading conditions.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.865-872
• /
• 2019

We developed a one-dimensional Ar fluid model running in DC-type applied voltage with a sine and a pulse waveform at the atmosphere pressure. We investigated the light emissions and efficiencies of ${\lambda}_{128nm}$, ${\lambda}_{727nm}$, ${\lambda}_{912nm}$ and ${\lambda}_{966nm}$ from the Ar excited particles. From the results, the light emission of ${\lambda}_{128nm}$ and ${\lambda}_{727nm}$ in the applied voltage with a sine waveform were almost two times as in DC voltage type. The shorter the switching time of applied voltage was, the more the light emissions of ${\lambda}_{128nm}$ and ${\lambda}_{727nm}$ were. We discussed the power consumption and Joule heating by charged particles.

• The Korean Journal of Applied Statistics
• /
• v.22 no.4
• /
• pp.781-792
• /
• 2009

At an early stage of genomic investigations, a small sample of microarrays is used in gene expression experiments to identify small subsets of candidate genes for a further accurate investigation. Unlike the statistical analysis methods for a large sample of microarrays, an appropriate statistical method for identifying small subsets is a randomization test that provides exact P values. These exact P values from a randomization test for a small sample of microarrays are discrete. The possible existence of differentially expressed genes in the sample of a full set of genes can be tested for the null hypothesis of a uniform distribution. Subsets of smaller P values are of prime interest for a further accurate investigation and identifying these outlier cells from a multinomial distribution of P values is possible by M test of Fuchs et al. (1980). Above all, the genome-wide gene expressions in microarrays are correlated, but the majority of statistical analysis methods in the microarray analysis are based on an independence assumption of genes and ignore the possibly correlated expression levels. We investigated with simulation studies the effect that correlated gene expression levels could have on the randomization test results and M test results, and found that the effects are often not ignorable.