• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.2
• /
• pp.20-26
• /
• 1997

A 6-component load cell (Fx=Fy=Fz=10Kg, Mx=My=Mz=1Kg-m)) is designed and manufactured. Basic mechanism of the operation is measuring strains coresponding to pure bending stresses, at certain portions of the device, due to forces and moments given. Wheastone bridge is used for the strain measurement and the amplified output signals from the bridge are decoupled to give the real forces and moments by using the influence coefficient matrix obtained through the calibration. Based on the result of the calibration test, the developed load cell is believed to be quite accurate and reliable. We also believe that the design experience provided us 'With essential information for future design of various types of conventional or object oriented force measuring device.

• The Korean Journal of Applied Statistics
• /
• v.32 no.4
• /
• pp.619-630
• /
• 2019

Dyslipidemia is a representative chronic disease affecting Koreans that requires continuous management. It is also a known risk factor for cardiovascular disease such as hypertension and diabetes. However, it is difficult to diagnose vascular disease without a medical examination. This study identifies risk factors for the recognition and prevention of dyslipidemia. By integrating them, we construct a statistical instrumental nomogram that can predict the incidence rate while visualizing. Data were from the Korean National Health and Nutrition Examination Survey (KNHANES) for 2013-2016. First, a chi-squared test identified twelve risk factors of dyslipidemia. We used a naïve Bayesian classifier model to construct a nomogram for the dyslipidemia. The constructed nomogram was verified using a receiver operating characteristics curve and calibration plot. Finally, we compared the logistic nomogram previously presented with the Bayesian nomogram proposed in this study.

• Journal of Korean Library and Information Science Society
• /
• v.51 no.4
• /
• pp.313-332
• /
• 2020

The purpose of this study is to compare motivations for self-archiving across disciplines on an academic social networking site. We carried out an online survey with ResearchGate(RG) users, testing 18 motivational factors that we developed from a previous study (enjoyment, personal/professional gain, reputation, learning, self-efficacy, altruism, reciprocity, trust, community interest, social engagement, publicity, accessibility, self-archiving culture, influence of external actors, credibility, system stability, copyright concerns, additional time, and effort). We adapted Biglan's classification system of academic disciplines and compared motivations across different categories of discipline. First, we compared motivations across the four combined categories by the two dimensions - hard-pure, hard-applied, soft-pure, and soft-applied. We also performed a motivation comparison across each dimension between soft and hard disciplines and between pure and applied disciplines. We examined investigated statistical differences in motivations by demographic characteristics and RG usage of participants across categories as well. Findings showed that there were differences of motivations, such as enjoyment, accessibility, influence of external actors and additional time and effort, and personal/professional gains, for self-archiving across disciplines. For example, RG users in the hard-applied were more highly motivated by enjoyment than others; RG users in the soft-pure were more highly motivated by personal/professional gains than others. It is expected that findings could be used to develop strategies encouraging researchers in various disciplines contributing to share their data and publications in ASNSs.

• Journal of Radiation Protection and Research
• /
• v.8 no.2
• /
• pp.36-40
• /
• 1983

Uranium radionuclides are electrodeposited on inexpensive stainless steel cathode from a mixed oxalate-chloride electrolyte. The factors affecting the optimum condition for the deposition are determined by studying the effects of deposition time, initial current, electrode spacing, pH of electrolyte and uranium concentration in the electrolyte at fixed cathode area. The experiment which was repeated 3 times at each uranium concentration with 60 minutes of deposition time, gave an error of less than 4% standard deviation at the 90% confidence level with average yield greater than 99%.

• Smart Media Journal
• /
• v.3 no.2
• /
• pp.9-13
• /
• 2014

The Levenberg-Marquardt (LM) algorithm is the most widely used fitting algorithm. It outperforms simple gradient descent and other conjugate gradient methods in a wide variety of problems. Based on the work of paper[1], we propose a modified Levenberg-Marquardt algorithm for better performance of mobile system. The LM parameter at the $k_{th}$ iteration is chosen ${\mu}=A{\bullet}{\parallel}f(x){\parallel}{\bullet}I$ where f is the residual function, and J is the Jacobi of f. In this paper, we show this method is more efficient than traditional method under the situation that the system iteration is limited.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.7B
• /
• pp.694-702
• /
• 2009

Geographical routing protocol, where nodes only need local information exchange to make routing decisions, is a very efficient routing scheme for wireless sensor networks in scalability. However, pure geographical routing does not take account of wireless link condition. If wireless link condition is not considered, when the routing table is updated, the nodes with bad link conditions are updated in the routing table and can be chosen as the next hop. This brings out the retransmissions because of received packet's errors. Also, because of these retransmissions, additional power is consumed. In this paper, we propose geographical routing scheme considering wireless link condition, where reliable data transmission is made and the consumed energy is minimized.

• Journal of Korea Game Society
• /
• v.15 no.5
• /
• pp.109-118
• /
• 2015

The game of Go originated from ancient China is regarded as one of the most difficult challenges in the filed of AI. Over the past few years, the top computer Go programs based on MCTS have surprisingly beaten professional players with handicap. MCTS is an approach that simulates a random sequence of legal moves until the game is ended, and replaced the traditional knowledge-based approach. We applied the UCT algorithm which is a MCTS variant to the game of Tic-Tac-Toe for finding the best first move, and compared it with the result generated by a pure MCTS. Furthermore, we introduced and compared the performances of epsilon-Greedy algorithm and UCB algorithm for solving the Multi-Armed Bandit problem to understand the UCB.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05d
• /
• pp.119-121
• /
• 2003

열을 발생하는 부품에 있어서 효과적으로 열방출 향상시키는 것은 부품의 신뢰성을 위해 중요한 사항이며, LTCC와 같은 고밀도 회로기판을 설계하는데 있어서 필수적으로 고려할 사항이다. 본 연구에서는 열전달을 향상시키기 위한 구조를 설계하였다. 또한, 열전달 효과를 조사하기 위해서 LTCC 기판 내에 열 비아 및 패드를 위치시킨 기판을 제작하였다. Laser Flash Method를 통해 재료의 열전도도 분석을 수행 하였다. 열비아 및 열방출을 위한 패드로 구성된 LTCC 기판의 열전도 특성은 순수 Ag 재료의 44%인 103 W/mK 특성 값을 나타내었다.

• Proceedings of the KIEE Conference
• /
• 2007.11b
• /
• pp.171-172
• /
• 2007

우리나라 전력계통 네트워크는 SCADA를 통해 데이터를 취득하고 있다. 초창기 SCADA를 도입할 당시에는 이 시스템이 성능과 기능면에서 그 당시의 최신기술이며 유일한 네트워크 모델이었다. 특히 핵심적인 부분에서는 국내 순수 기술이 아닌 외국 제품이 적용되었다. 그러나 근래에 기술동향은 정보통신의 점진석인 발달과 하드웨어의 성능 향상 등을 통해 동일조건에서 동인 시스템을 구축할 경우 이전과 비교해 볼 때 월등한 효율성과 경제성을 갖출 수 있다. 특히나 전력계통의 경우 신뢰성을 기반으로 한 국가 기간산업이므로 이러한 기술을 적용한 파급효과는 보수적인 면이 있다. 따라서 본 논문에서는 이런 특성을 고려하여 현재의 SCADA를 분석해보고 애플리케이션을 추가할 경우에 어떻게 설계해야 할지에 대해 살펴보고자 한다.

• Proceedings of the Safety Management and Science Conference
• /
• 2000.05a
• /
• pp.217-224
• /
• 2000

건축물의 인조석 외장재를 생산하고 업체의 품질분석을 하기 위한 연구과제이다. 인조석은 자연석과 동일한 구성성분으로 거의 완벽한 자연석 그대로의 자연스러운 질감과 아름다움이 함께 하며 다양한 종류의 패턴과 세련된 색상 그리고 품위 있는 질감으로 최상급 건축마감재로 선택되어지고 있다. 하지만, 고유기술 및 관리기술의 미흡으로 제작과정 자체가 원시적이며, 제품의 신뢰성 자체를 객관적으로 보증 받을 수 있는 기준이 마련되어 있지 않다. 그리고 본사에서 생산하고 있는 외장재용 인조석은 KS규격도 전혀 이루어져 있지 않을 뿐만 아니라, 자체 시험 자료가 전혀 이루어져 있지 않는 관계로 새로운 로트를 장착했을 때 골재, 안료 및 혼화재 간의 배합비를 어떻게 구성하여야 할 것인가를 순수 기술자의 know-how에만 의존해야 하는 실정이다.