• Journal of Korea Water Resources Association
• /
• v.46 no.6
• /
• pp.597-611
• /
• 2013

This paper presents the methodology for construction of time-area curve via the width function and thereby rational estimation of time of concentration and storage coefficient of Clark model within the framework of method of moments. To this end time-area curve is built by rescaling the grid-based width function under the assumption of pure translation and then the analytical expressions for two parameters of Clark model are proposed in terms of method of moments. The methodology in this study based on the analytical expressions mentioned before is compared with both (1) the traditional optimization method of Clark model provided by HEC-1 in which the symmetric time-area curve is used and the difference between observed and simulated hydrographs is minimized (2) and the same optimization method but replacing time-area curve with rescaled width function in respect of peak discharge and time to peak of simulated direct runoff hydrographs and their efficiency coefficient relative to the observed ones. The following points are worth of emphasizing: (1) The optimization method by HEC-1 with rescaled width function among others results in the parameters well reflecting the observed runoff hydrograph with respect to peak discharge coordinates and coefficient of efficiency; (2) For the better application of Clark model it is recommended to use the time-area curve capable of accounting for irregular drainage structure of a river basin such as rescaled width function instead of symmetric time-area curve by HEC-1; (3) Moment-based methodology with rescaled width function developed in this study also gives rise to satisfactory simulation results in terms of peak discharge coordinates and coefficient of efficiency. Especially the mean velocities estimated from this method, characterizing the translation effect of time-area curve, are well consistent with the field surveying results for the points of interest in this study; (4) It is confirmed that the moment-based methodology could be an effective tool for quantitative assessment of translation and storage effects of natural river basin; (5) The runoff hydrographs simulated by the moment-based methodology tend to be more right skewed relative to the observed ones and have lower peaks. It is inferred that this is due to consideration of only one mean velocity in the parameter estimation. Further research is required to combine the hydrodynamic heterogeneity between hillslope and channel network into the construction of time-area curve.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.4
• /
• pp.376-384
• /
• 2009

Purpose: The purpose of this study was to evaluate the response of osteoblast-like cells to Ca-P coated surface obtained via Ion beam-assisted deposition (IBAD) method and Sol-Gel process on anodized surface by cellular proliferation and differentiation. Material and methods: The surface of a commercially pure titanium (Grade IV) discs with dimension of 10mm diameter and 2 mm thickness was modified by anodic oxidation under a constant voltage of 300 V. The experimental groups were coated with Ca-P by the IBAD method and Sol-Gel process on anodized surface. The surface roughness (Ra) of specimens was measured by optical interferometer and each surface was examined by SEM. To evaluate cell response, MG63 cells were cultured and cell proliferation, ALP activity and the ability of cell differentiation were examined. Also, cell morphology was examined by SEM. The significant of each group was verified by Kruskal-Wallis Test ($\alpha$=.05). Results: The Ra value of Ca-P coated surface by IBAD method was significantly higher than Ca-P coated surface by Sol-gel process (P < .05). The level of cell proliferation and ALP activity was higher in Ca-P coated surface by IBAD method (P<.05). The expression of ALP showed higher level expression in Ca-P coated surface by IBAD method. Cells grown on Ca-P coated surface by IBAD method were uniformly distributed and developed a very close layer. Conclusion: These experiments showed better performances of Ca-P coated surface by IBAD method with respect to Ca-P coated surface by Sol-gel process. Ca-P coated surface by IBAD method appear to give rise more mature osteoblast characteristics and might result in increased bone growth and bone-implant contact.

• Journal of Korean Society of Forest Science
• /
• v.87 no.4
• /
• pp.519-527
• /
• 1998

An economic study of vegetation control to increase production of Songyi (Korean name far pine mushroom, matsutake, Tracholoma matsutake (S. Ito & Imai) Sing.) in red pine (Panes densiflora) stands in Korea was undertaken. In Korea, Songyi grows only in red pine stands. Harvest of this mushroom provides a significant income source to rural people in Korea yielding exports of US$20 million to US$80 million per year. However, hypogeous Songyi colonies and the mushroom production are declining, partly because shade tolerant species are succeeding the shade intolerant red pine. Past research says that it is possible to deep Songyi production increasing by controlling under-story vegetation. But few people are wilting to invest in the necessary control. Our analysis found that the economics of vegetation control appear to be quite favorable, showing an internal rate of return (IRR) of 20.7 percent in 15 years. However, positive returns do not occur for at least eight years and even then, the returns may not appear to the landowner to be a result of vegetation control efforts only because the mushroom production has been greatly variable depending on weather conditions. In a sensitivity analysis, it was found that the number of circular mushroom colonies was critically important for the cash flow. Results of this analysis are also sensitive to assumptions about annual growth length(0.16m radial growth=1.0m/circular length growth) of Songyi colony. However, the primary goal of vegetation control should be to keep the young colonies growing. Further research in the behavior of hypogeous Songyi colonies after vegetation control would help to improve our confidence in the results.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.4
• /
• pp.517-524
• /
• 2011

Eleven polyphenolic compounds, including procatechuic and chlorogenic acids, (+)-dihydroquercetin, rutin, isoquercitrin, quercitrin, (+)-dihydrokaempferol, trans-resveratrol, moracin, quercetin and 4-prenylmoracin were isolated and purified from the methanolic extract of defatted mulberry seed residue by a series of column chromatography including silica gel, Sephadex LH-20, and ODS-A, and their chemical structures were identified by spectral analysis. The antioxidant activities of the eleven isolated polyphenolic compounds were measured spectrophotometrically using DPPH radical. Among the eleven polyphenolic compounds tested, rutin ($IC_{50}=20.2\;{\mu}M$), isoquercitrin ($IC_{50}=22.5\;{\mu}M$), quercitrin ($IC_{50}=24.6\;{\mu}M$), quercetin ($IC_{50}=27.8\;{\mu}M$), (+)-dihydroquercetin ($IC_{50}=28.9\;{\mu}M$), and chlorogenic acid ($IC_{50}=30.6\;{\mu}M$) exhibited stronger antioxidant activity than L-ascorbic acid ($IC_{50}=31.5\;{\mu}M$) and ${\alpha}$-tocopherol ($IC_{50}=52.3\;{\mu}M$), whereas procatechuic acid ($IC_{50}=68.2\;{\mu}M$) showed lower activity. In addition, (+)-dihydrokaempferol ($IC_{50}=33.8\;{\mu}M$), trans-resveratrol ($IC_{50}=36.2\;{\mu}M$), moracin ($IC_{50}=47.6\;{\mu}M$), and 4-prenylmoracin ($IC_{50}=48.2\;{\mu}M$) exhibited moderate antioxidant activity. Furthermore, levels of the eleven polyphenolic compounds from three different types of mulberry seeds were quantified by HPLC, and their contents were as follows: rutin (311~60.0 mg/100 g)> quercitrin (7.2~34.2 mg/100 g)> (+)-dihydroquercetin (13.2~33.1 mg/100 g)> quercetin (15.8~19.5 mg/100 g)> 4-prenylmoracin (10.5~43.3 mg/100 g)> isoquercitrin (5.8~15.4 mg/100 g)> chlorogenic acid (0.0~15.3 mg/100 g)> moracin (4.7~7.2 mg/100 g)> procatechuic acid (0.0~11.6 mg/100 g)> (+)-dihydrokaempferol and trans-resveratrol (<0.1 mg/100 g). The 'Daesungppong' mulberry seeds among the three cultivars had higher flavonoid contents, such as rutin and quercetin derivatives, while the 'Iksuppong' seeds had the highest contents of phenolic acids and moracin derivatives. 'Cheongilppong' had lower amounts of polyphenolic compounds than the other two mulberry seeds. These results indicate that mulberry seeds containing antioxidant polyphenolic compounds may be potentially useful sources of anti-diabetic, anti-hypertensive, and anti-aging agents for functional foods and cosmetics.

• Resources Recycling
• /
• v.2 no.2
• /
• pp.27-38
• /
• 1993

In this study, we investigated the grinding and sedimentation(elutriation) process of the dusts for the effective separation of high purity iron and iron oxides. For characterization of the dust, particle size distribution and chemical composition, were examined. The results obtained in this study may be summarized as follows : 1. The converter CF(clarifier) dust of the Pohang 1st, 2nd steel making factory and EC(Evaporation Cooler), EP(Eltrostatic precititator) dust of the Kwangyang 2nd steel making factory are composed $\alpha$-Fe(21~50%), FeO(wustite)$Fe_3$$O_4$(magnetite), $Fe_2$$O_3$, CaO, $Al_2$$O_3$, $SiO_2$, and etc. 2. Pure iron has ductile characteristic in nature, particle size of the pure iron increase by increasing the grinding time. On the other hand, it is conformed that bo고 particles of hematite and magnetite become less than 325 mesh after 10 minutes grinding. 3. By applying the elutriation technique for the EC dust of the Kwangyang 2nd steel making factory, the iron powder of high content more than 99.17% of pure Fe was recovered with 37.8% yield at grinding time for 40 minutes. 4. By applying the elutriation technique for the CF dust of the Pohang 2nd steel making factory, the iron powder of high content more than 98.38% of pure Fe was recovered with 44.42% yield at grinding time for 40 minutes. 5. When magnetic separation was performed using plastic bonding magnet of 70 gauss, more than 98% Fe grade of iron powder was recovered in the size range +65 -200 mesh but the recovery of it was low.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.2
• /
• pp.167-175
• /
• 2005

Houttuynia cordata THNUB (He; Uh-Sung-Cho) is a medicinal plant which has been widely used as a component of blood-building decoctions. This study was performed to investigate the immunomodulative effect of He in mice. In vitro experiment, the mice splenocytes proliferation and three kinds of cytokines (IL-1$\beta$, IL-6, TNF- $\alpha$) production by mice peritoneal macrophages cultured with six (methanol, hexane, chloroform, ethylacetate, butanol and water) fractions of He were used to indicate the immunomodulative effect. Ex vivo experiment, the different concentrations of He water extract was orally administrated every other day for two weeks. The production of cytokines IL-1$\beta$, IL-6, TNF- $\alpha$) secreted by activated macrophages and the mice splenocytes proliferation were used as an index for the immunocompetence. The supplementation of all six fractions of He enhanced the splenocytes proliferation at the level of 6.58$\pm$1.23∼47.82$\pm$5.48 compared to that of control in the range of 1∼50 $\mu\textrm{g}$/mL. IL-1$\beta$ production was significantly increased with the supplementation of chloroform and water extract of He. Higher level of IL-6 production was detected by the supplementation of ethylacetate, butanol and water extract. TNF - $\alpha$ production was enhanced by the supplementation of all six fractions of He. From the ex vivo study, the highest proliferation of splenocytes was seen from the mice orally administrated with the He water extract at the concentration of 500 mg/kg bw In case of cytokines production, IL-1$\beta$, IL-6, and TNF- $\alpha$ release by activated peritoneal macrophages were augmented by the oral administration of He water extract. These results indicated that He may enhance the immune function by regulating the splenocytes proliferation and cytokines production capacity in mice.

• Korean Journal of Environment and Ecology
• /
• v.15 no.4
• /
• pp.361-368
• /
• 2002

The valley forests located at the east-facing slope and the west facing slope in Hambaeksan area were studied to investigate forest structure in relation to aspect and altitude of the slope. There was little difference in density. mean DBH and basal area of the tree layer between east-facing slope and west-facing slope. The importance percentages of Tilia amurensis and Betula costata in west-facing slope were higher than those in east-facing slope. However, the importance percentages of Quercus mongilica and Fraxinus rhynchophylla in the west facing slope were lower than those in east-facing slope. Species diversity of the west-facing slope was 1.415 and that of the east-facing slope was 1.328. Elevation trends were also found for forest structure. As elevation Increased basal area and mean height of the tree layer decreased in both of east-facing slope and west-facing slope. There was a tendency that number of species, species diversity and evenness decreased with increasing elevation. The importance percentage of Quercus mongolica increased with increasing elevation while those of Betula costata and Maackia amurensis decreased. The result of cluster analysis for the tree and subtree layer indicated that the studied forests were classified into the mixed forest community of broad-leaved tree species at west-facing slope and the low and middle elevation belts of east-facing slope and Quercus mongolica community at the high elevation belt of east-facing slope. Quercus mongolica was significantly and positively correlated with Symplocos chinensis for. pilosa, Acer tschonoskii var. rubripes and deutzia glabrata. Betula costata was significantly and negatively correlated with Quercus mongolica and Acer pseudo-sieboldianum.

• Journal of the Korean Magnetics Society
• /
• v.18 no.3
• /
• pp.109-114
• /
• 2008

The samples were synthesized by using a solid state reaction. The X-ray diffraction pattern for $Ti_{0.96}Co_{0.02}Fe_{0.02}O_2$ showed a pure rutile phase with tetragonal structure, Mixtures of the proper proportions of the elements sealed in evacuated quartz ampoule were heated at $870{\sim}930^{\circ}C$ for one day and then slowly cooled down to room temperature at a rate of $10^{\circ}C$/h. In order to obtain single phase material, it was necessary to grind the sample after the first firing and to press the powders into pellets before annealing them for a second time in evacuated and sealed quartz ampoule. Magnetic properties have been investigated using the vibrating sample magnetometer (VSM). Room temperature magnetic hysteresis (M-H) curve showed an obvious ferromagnetic behavior and the magnetic moment per Fe atom under the applied of 0.8 T was estimated to be about $1.5\;{\mu}_B$/CoFe. But the magnetic moment per Fe atom under the applied of 0.8 T was estimated to be about $0.02\;{\mu}_B$/CoFe without Ti-getter. Size of particles is about $1\;{\mu}m$ using the transmission electron microscope (TEM). The ingredients of sample are distributed irregular in particles. Only Fe get shown on the surface of particles.

• Journal of the Korean Magnetics Society
• /
• v.13 no.5
• /
• pp.187-192
• /
• 2003

The magnetic and thermal properties of NiFe/[IrMn-Mn]/CoFe with Mn additions have been studied. As-deposited CoFe pinned layers with [IrMn-Mn]layer had dominantly larger exchange biasing field ( $H_{ex}$) and blocking temperature ( $T_{b}$) than those with pure I $r_{22}$M $n_{78}$ used. The $H_{ex}$ and $T_{b}$ improved with 76.8-78.1 vol% Mn, but those of the NiFe/IrMn/CoFe dropped considerably with more addition of 0.6 vol % Mn. The average x-ray diffraction peak ratios of fcc [(111)CoFe, NiFe]/(111)IrM $n_3$ textures for the Mn inserted total vol of 75.5, 77.5, and 79.3% were about 1.4, 0.8, and 0.6, respectively. For the sample without Mn inserted layer, the $H_{ex}$ between IrMn and CoFe layers was almost zero, but it increased to 100 Oe after annealing of 250 $^{\circ}C$. For as-grown two multilayers samples with ultra-thin Mn layers of 77.5 and 78.7 vol %, the $H_{ex}$s were 259 and 150 Oe, respectively. In case of IrMn with 77.5 vol% Mn, the $H_{ex}$ was increased up to 475 Oe at 350 $^{\circ}C$ but decreased to 200 Oe at 450 $^{\circ}C$, respectively. The magnetic properties and thermal stabilities of NiFe/[IrMn-Mn]/CoFe multilayer were enhanced with Mn additions. In applications where higher $H_{ex}$ and $T_{b}$ are required, proper contents of Mn can be used. be used. used.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.4
• /
• pp.555-563
• /
• 2004

The pH of beverages is known to be low and have, therefore, been implicated in the increasing incidence of erosion. Erosion is believed to be the predominant cause of teeth wear in children and young adults, although there will always be a contribution from attrition and abrasion. The aim of the present study was to evaluate the effect of yogurt on the progression of erosive demineralization in human enamel using demineralization model in vitro. In 4 yogurts, available on the market, pH, buffering capacity and the concentrations of calcium, phosphate and fluoride were determined. The buffering effect was determined by titration with NaOH. 50 milliliters of each drink was then titrated with 1M sodium hydroxide, added in 0.5 milliliters increments, until the pH reached about 7. Human deciduous enamel(n=40) samples were divided into four groups and exposed to 80ml of the yogurt for 30,60, 90 and 120min. Enamel surface microhardness(VHN) was examined before and after each exposure. 1. The average PH of fermented milk was 3.77 and this pH value was acidic enough to cause tooth erosion. 2. All of the fermented milks were found to be erosive(p<0.05) 3. The teeth exposed to the fermented milk all showed erosion like lesions and microhardness measurements showed that enamel surface hardness decreased proportionately with increased time of immersion in all tooth specimen groups. 4. After immersion for 30 and 60 minutes, reduction rate of microhardness values was not significantly different between the groups(p>0.05). However, after 90 and 120 minutes, reduction rate of each group was significantly different(p<0.05).