• Membrane Journal
• /
• v.22 no.6
• /
• pp.470-480
• /
• 2012

In this study, for a linear tubular membrane with constant diameter the mass balance considering permeate velocity of the each unit length was established. On this basis, mathematical modelling of flows in a pipe was solved using nonlinear second order differential equations as well as steady-state equation. Since this equation is nonlinear, Gauss-Seidel method or another iteration method were used to solve the differential equations. Simulation algorithm for numerical solutions was presented. Also since the permeate flow is varied as operating condition, the solution of equations at each conditions using numerical integrations such as Simpson's rules was used. In order to analyze and compare simulation results, we have performed experiments using a hollow fiber membrane with almost identical tubular membrane. Comparison of theoretical and experimental results, pressure drop, flow rate, and permeate flow in a hollow fiber membrane, were illustrated.

• Analytical Science and Technology
• /
• v.23 no.6
• /
• pp.518-523
• /
• 2010

In this paper, the study of analysis of uranium isotopes in environmental samples with a kinetic phosphorescence analyzer (KPA) was described. After leaching uranium fraction from soil and glass material with microwave acid digestion technology, uranium isotopes were purified with UTEVA column, and then measured using KPA. Linearity and repeatability tests for measurement of uranium isotopes were carried out in the uranium standard solution with KPA. The reliability for analytical method of uranium with KPA was validated by its application to uranium standard solution, ground water, IAEA and NIST reference samples.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.6
• /
• pp.119-125
• /
• 2002

The temperature decrease of discharge space was very important to generate the high concentration of ozone in silent discharge type ozone generator. At this time, binding materials and methods between dielectric barrier and ground electrode affected to the discharge importantly in electrical and thermal point of view. So, above two factors become very important parameters should be considered before designing the ozone generator. In this study, binders of silicone compound, electroconductive resin and charcoal were used for variations of binders properties. Resultantly, when the binding materials were used, better ozone generation characteristics were shown(maximum ozone generation 28044［ppmV］ at 6.0［kV］) in comparison with the non-used case (maximum ozone generation 15944［ppmV］ at 4.0［kV］). In addition, when the binding materials were used, the case of pure silicone compound showed better characteristics(maximum ozone generation 28044［ppmV］ at 6.0［kV］) than the cases of conductive binding materials(maximum ozone generation 25842［ppmV］ at 5.5［kV］ and including the charcoal 5%).

• Polymer(Korea)
• /
• v.31 no.2
• /
• pp.117-122
• /
• 2007

In this work, the mechanical and electrical properties, and thermal stability of vapor-grown carbon nanofibers/polyimide (VGCNFs/PI) composite film synthesized by in-situ polymerization were investigated in terms of tensile properties, volume resistivity and thermogravimetric analysis (TGA), respectively. From the results, the addition of VGCNFs with a certain amount into polyimide led to obvious improvement in tensile strength. The volume resistivity of the films was decreased with increasing the VGCNFs content and the electrical percolation threshold appeared between 1 and 3 wt% of VGCNFs content, which was probably caused by the formation of interconnective structures among the VGCNFs in a composite system. The thermal stability of the film was higher than that of pure PI one. This result indicated that the crosslinking of VGCNFs/PI Composites was enhanced by well-distribution of YGCNFs in PI resin, resulting in the increase of the thermal stability of the resulting composites.

• Journal of Life Science
• /
• v.17 no.4 s.84
• /
• pp.482-492
• /
• 2007

Infection with Shiga-like toxin (SLT)-producing Escherichia coli causes a spectrum of illnesses with high morbidity and mortality. Host mediators play an important role in the pathogenesis of SLT-I toxicity. We here investigated the effect of SLT-I on tumor necrosis $factor-{\alpha}\;(TNF-{\alpha})$ production, effect of $TNF-{\alpha}$ on glycolipid globotriaosyleramide (Gb3) expression, and relationship between Gb3 level and differential susceptibility of cells to SLT-I. In this study, we observed that detectable levels of $TNF-{\alpha}$ are produced 6 hrs after induction and continued to increase during 48 hrs by SLT-I. It was also found that Vero cells and dendritic cells expressed high levels of Gb3, 83% and 68%, respectively, and that macrophages had a low level of Gb3 (29%) and showed refractory to cytotoxicity against SLT-I. Vero cells and dendritic cells expressing high levels of Gb3 were highly susceptible to SLT-I. furthermore, macrophages showed a resistance to SLT-I cytotoxicity, despite the fact that Gb3 expression was enhanced. These results suggest that the expression of Gb3 is necessary, but not sufficient to confer sensitivity of macrophages to SLT-I and further underpin the important role of SLT-I and its receptor, Gb3, in the pathogenesis of E. coli O157 infection.

• Journal of the Korea Concrete Institute
• /
• v.18 no.2 s.92
• /
• pp.275-282
• /
• 2006

Recently, Fiber Reinforced Polymers(FRP) has been emerged as an alternative material to solve the corrosion of steel reinforcement in reinforced concrete structures. FRP exhibits higher specific strength and lower weight compared to steel reinforcement. Moreover, good resistance to corrosion of the FRP may be useful in aggressive environments causing deterioration such as chloride environment. However, causes for higher initial cost of FRP than that of steel, little information on the long-term behavior of FRP, and brittle failure make the efforts to apply FRP in civil structures slow. Glass fiber among the fibers used to manufacture FRP can be seen as the most beneficial material with regard to initial costs. But its low elastic modulus, which attains barely a quarter of steel, nay thus lead to excessive deflections when used as reinforcement for flexural members. This research was carried out on the tensile properties of hybrid rods made with glass and carbon fibers to improve those of FRP rod made with glass fiber. Parameters were resin type and the arrangement of glass and carbon fibers. The tensile properties of hybrid rods were compared with those of rods manufactured with only glass or carbon fibers. The results indicated that the tensile properties of hybrid rod were good when the carbon fiber was arranged in the core.

• Applied Chemistry for Engineering
• /
• v.2 no.3
• /
• pp.270-278
• /
• 1991

Carboxymethyl chitin(CM-chitin) was prepared by the reaction of alkali chitin with monochloroacetic acid in isopropyl alcohol. According to the pH variation, the adsorptivity of this chelating polymer to the alkali-earth metal ions such as $Ca^{2+},\;Mg^{2+}$, $Sr^{2+}$, $Ba^{2+}$ ions was determined by batch method. The adsorption tendency of this chelating polymer to most metal ions was increased with the increase of pH. The highest degree of adsorption was observed toward $Ca^{2+}$ ion among the alkali-earth metal ions. The selectivity adsorption property toward $Ca^{2+}$ ion was examined in the solution of $Ca^{2+}$ and $Mg^{2+}$ ions, and it was observed that CM-chitin showed excellent selectivity to $Ca^{2+}$ ion than $Mg^{2+}$ ion. $Mg^{2+}$ ion bound to CM-chitin molecule in the presence of $Ca^{2+}$ ion owing to low equilibrium constant. In the adsorption experiment of $Ca^{2+}$ and $Mg^{2+}$ ions to the CM-chitin under coexistence of $Na^+$ and $K^+$ ions, it observed that adsorptivity of only $Ca^{2+}$ ions was not affected by these monovalent cations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.648-655
• /
• 2016

As the FTAs' implementations are accelerated, an Ex-post assessment, such as an analysis of the tariff schedule and agricultural trade has been emerging as an important national issue for an agricultural sector Korea-EU FTA, which was to be implemented in the five years from July 2016 as one of the giant FTA. The purpose of this study was to determine the demand of an ex-post assessment on agricultural sector as a trade negotiation procedural law. In addition, by providing policy direction for the agricultural policy part requiring amendments and supplements through ex-post assessment, the conflicting arguments between agricultural and non-agricultural sector can be evaluated more objectively. The current evaluation method on the economic impact ex-post assessment of a FTA is generally compared using the change in trade balance before and after the time of FTA implementation. On the other hand, this comparison cannot be said to be the pure FTA effects and objective, tightening economic impact assessment of the FTA in all combined situations, such as the effects of exchange rates and international macroeconomic changes and climate change & occurrence of pests. Over the last 4 years, however, Korea-EU FTA's total accumulated agricultural GDP loss was measured to be 2,178 billion by these research attempts with dynamic analysis as ex-post assessment methodology. The greatest impact was mainly livestock and pork followed by cereals and vegetables. In addition, this research is expected to contribute to policy evaluations in the future.

• Korean Chemical Engineering Research
• /
• v.54 no.3
• /
• pp.410-418
• /
• 2016

In this study, we prepared electrically conducting composites using epoxy resin of diglycidyl ether of bisphenol A (DGEBA) as a matrix, triethylenetetramine (TETA) as a hardener and nickel powder or multi-walled carbon nanotubes (MWCNTs) grafted with $-NH_2$ groups (MWCNT-$NH_2$) as electrically conducting fillers. Electrical conductivity of composite films were measured by coating on the slide glass with a doctor blade. We measured modification reactions of MWCNT and reaction of MWCNT-$NH_2$ with DGEBA epoxy resin by fourier transform infrared spectrometer (FTIR), thermogravimetric analyzer (TGA) and elemental analyzer (EA). Morphology of composites was investigated by scanning electron microscope (SEM) and sheet resistances of composites were measured by 4-point probe. We found $(9.87{\pm}1.09){\times}10^4{\Omega}/sq$ of sheet resistance for epoxy composite containing both 40 wt% nickel powder and 0.5 wt% of MWCNT-$NH_2$ as fillers, equivalent to epoxy composite containing 53.3 wt% nickel powder only as a filler.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1992.05a
• /
• pp.28-28
• /
• 1992

브라디키닌은 체내에서 강력한 혈관 확장 작용을 일으키는 autacoid(local hormone)로서 혈압의 항상성 유지, 모세혈관 투과성 증진, 염증 및 통증 반응 등에 관여하고 여러 장관 평활근을 수축시킨다. 또한 septic 혹은 endotoxic shock의 여러 원인 물질로도 생각되어진다. 최근 rhinovirus로 인한 감기의 제증상 원인 물질로도 브라디키닌이 주목을 받고있다. 이와같이 브라디키닌온 다양한 질병에 있어 중요한 원인 물질로 여겨지므로 브라디키닌 길항제들은 한두 질병의 치료제로 개발될 가능성이 높음이 강력히 제시되고 있는 실정이다. 이의 개발을 위해서 브라디키닌 수용체에 대한 연구는 필수적이라고 할 수 있다. 본 연구는 두 부분으로 나누어 진행중인데 첫째, 이제까지 보고된 브라디키닌 길항 물질들은 대부분이 브라디키닌의 특정 아미노산 잔기를 치환시킨 펩타이드 유도체로서 이들을 경구 투여시 peptidase어 의하여 쉽게 분해되고 또한 부분적인 효능제 활성을 갖는 불리한 점을 감안하여, 비펩타이드성 브라디키닌 길항제를 개발할 목적으로 한방 및 민간에서 자주 사용되어온 생약중에 브라디키닌 작용에 선택적 길항효과가 있는 물질을 검색한 바 활성을 보인 황금으로부터 작용 성분을 추적중에 있다. 둘째, 브라디키닌 수용체를 순수하게 분리 정제하기 위한 첫 단계로서 이 수용체의 결합시험(binding assay) 방법을 확립하고 더불어 여러 조직내(흰쥐의 여러 기관, 토끼 및 사람의 신장)의 브라디키닌 수용체의 분포를 파악하는 일이다. 횐쥐 조직의 실험 결과로부터 신장에 브라디키닌 수용체가 많이 분포함을 확인되었고 향후 토끼 신장으로부터 동수용체를 분리하고자 한다. 또한 토끼 신장의 근위세뇨관일차배양세포을 이용하여 브라디키닌의 신장에서의 작용기전도 살펴보고 있다.+}$, $Na^{+}$, NH$_{4}$$^{+}$ 및 H$^{+}$) 수용액 메디움에서의 Cd(II), Mg(II) 및 Zn(II)의 Dowex 1-X8, Cl$^{-}$ 수지에 대한 흡착은 역시 어떤 메디움에서도 Cd(II) 흡착이 제일 크며, 다음이 Zn(II) 이고 착이온을 형성않는 Mg(II)이 제일 작았다. 한편 메디움 종류별 D값의 크기순위는 H$^{+}$>K$^{+}$> $Na^{+}$>NH$_{4}$$^{+}$이였다. 메디움의 종류에 따라 D값의 차이가 나는 것은 금속이온의 착이온 형성과 금속이온의 용액내에서의 이온종의 상태와 관련이 있다고 생각된다. 마. MCl(M:K$^{+}$, $Na^{+}$, NH$_{4}$$^{+}$ 및 H$^{+}$)과 MNO$_{3}$ 용리액에 의한 Cd(II), Mg(II) 및 Zn(II)의 용리는 예상한 바와 같이 MCl에서 작은 Dv 값을 갖는데, 이것은 CdCl$_{4}$$^{2-}$ 착이온을 형성하거나 ZnCl$_{4}$$^{2-}$ , ZnCl$_{3}$$^{-}$같은 이온과 MgCl$^{+}$, MgCl$_{2}$같은 이온종을 형성하기 때문인것 같다. 한편 어떠한 용리액에서던지 NH$_{4}$$^{+}$의 경우