• Journal of the Korean Society of Food Culture
• /
• v.23 no.2
• /
• pp.293-300
• /
• 2008

It determines Chinese addiction to piquancy that the Chinese traditional food production laid excessively particular stress on agriculture coming into being long before in the history and the state of Chinese food living was that the people were very difficult to live. The history of Chinese addiction to piquancy could be traced back to prehistory. And in Chinese “hot” is separated from “peppery” and it refers in particular to the piquancy more than general peppery. The character of “Hot” appeared after Han Dynasty in Chinese. Capsicum was brought to China from the sea in the middle of Ming Dynasty. Then it surpassed the formers soon and became the most popular and addictive piquancy food in China. Capsicum has many names in China, such as “$F{\bar{a}}nji{\bar{a}}o$”, “$H{\bar{a}}iji{\bar{a}}o$”, “$L{\grave{a}}ji{\check{a}}o$”, “$L{\grave{a}}h{\breve{u}}$”, “$L{\grave{a}}zi$”, etc., and they indicate the geographical and humanistic character of the distribution. (eight books on preserving one’s health) is the earliest history record about capsicum in existent Chinese history record that was finished in 1591. In this article the author puts new opinion forward on the record in this book. It is because the hottest piquancy of capsicum, capsicum’s better adaptability and low cost to plant combine with Chinese piquancy addiction at large that capsicum can replace the status of pepper and other traditional peppery flavorings soon and cause worldwide attention to the Chinese piquancy addiction finally. The human common characters of unchangeable inertia, depending to fully grow addiction and aggrieved delight are the most important reasons to cause piquancy addiction that has formed a custom through long-repeated practice and this custom do not change with condition change. The unbalanced spread process of capsicum in China shows that the region is poorer and the addictive degree is deeper.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.1
• /
• pp.57-70
• /
• 2009

Considerable advance has been made on research on effect of steel pipe Umbrella Arch Method (UAM) and mechanical reinforcement mechanism through numerical analyses and experiments. Due to long analysis time of three-dimensional analysis and its complexity, un-quantitative two-dimensional analysis is dominantly used in the design and application, where equivalent material properties of UAM reinforced area and ground are used, For this reason, development of reasonable, theoretical, quantitative and easy to use design and analysis method is required. In this study, both field UAM tests and laboratory tests were performed in the residual soil to highly weathered rock; field tests to observe the range of reinforcement, and laboratory tests to investigate the change of material properties between prior to and after UAM reinforcement. It has been observed that the increase in material property of neighboring ground is negligible, and that only stiffness of steel pipe and cement column formed inside the steel pipe and the gap between steel pipe and borehole contributes to ground reinforcement. Based on these results and concept of Convergence Confinement Method (CCM), two dimensional axisymmetric analyses have been performed to obtain the longitudinal displacement profile (LDP) corresponding to arching effect of tunnel face, UAM effect and effect of supports. In addition, modified load distribution method in two dimensional plane-strain analysis has been suggested, in which effect of UAM is transformed to internal pressure and modified load distribution ratios are suggested. Comparison between the modified method and conventional method shows that larger displacement occur in the conventional method than that in the modified method although it may be different depending on ground condition, depth and size of tunnel, types of steel pipe and initial stress state. Consequently, it can be concluded that the effect of UAM as a beam in a longitudinal direction is not considered properly in the conventional method.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.565-575
• /
• 2009

In recent years, there have been numerous explosion-related accidents due to military and terrorist activities. Such incidents caused not only damages to structures but also human casualties, especially in urban areas. To protect structures and save human lives against explosion accidents, better understanding of the explosion effect on structures is needed. In an explosion, the blast load is applied to concrete structures as an impulsive load of extremely short duration with very high pressure and heat. Generally, concrete is known to have a relatively high blast resistance compared to other construction materials. However, normal strength concrete structures require higher strength to improve their resistance against impact and blast loads. Therefore, a new material with high-energy absorption capacity and high resistance to damage is needed for blast resistance design. Recently, Ultra High Strength Concrete(UHSC) and Reactive Powder Concrete(RPC) have been actively developed to significantly improve concrete strength. UHSC and RPC, can improve concrete strength, reduce member size and weight, and improve workability. High strength concrete are used to improve earthquake resistance and increase height and bridge span. Also, UHSC and RPC, can be implemented for blast resistance design of infrastructure susceptible to terror or impact such as 9.11 terror attack. Therefore, in this study, the blast tests are performed to investigate the behavior of UHSC and RPC slabs under blast loading. Blast wave characteristics including incident and reflected pressures as well as maximum and residual displacements and strains in steel and concrete surface are measured. Also, blast damages and failure modes were recorded for each specimen. From these tests, UHSC and RPC have shown to better blast explosions resistance compare to normal strength concrete.

• Journal of the Korean Society of Food Culture
• /
• v.23 no.1
• /
• pp.90-96
• /
• 2008

This study was performed to reveal nutritional excellency of popular Korean dishes, which were intended to distribute as a take-out type food suited for Americans. Four Korean dishes were selected due to their high preference from American sensory panels: Jeyuk-bokkeum (B), Kimchi-bokkeum (C), Dubu-jorim (D) and Namul (E). Nine weeks of the experimental periods were composed of two parts. In phase 1(5 weeks of the first half), high fat diets were fed to all treatments including the control group (A). In phase 2 (4 weeks of the last half), freeze-dried four Korean dishes were fed to the treatments except for the control. There was no significant difference in the final body weights among the groups as well as daily body weight gains and FER. Organ weights of the control group tended to be smaller than those of the treatment groups. For visceral fats, perirenal fat pad (RFP) and epidydimal fat pad (EFP) of the groups C and D were decreased by 20% compared with those of the group A. Total cholesterol level of the group C (94.13 mg/dL) was significantly lower than any other groups (p<0.05), but there was no significant difference in triglyceride(TG) level. HDL-cholesterol level of group B(20.38 mg/dL) was significantly higher than that of group D (17.25 mg/dL), but no significant differences were seen in groups C and E (p<0.05). In LDL-cholesterol level, the highest level was seen in group D, the lowest level in group E (p<0.05). From the findings, Kimchi-bokkeum, Dubu-jorim and Namul were superior to those of the control and jeyukbokkeum in terms of the blood lipid profiles. It might be a good Korean style take-out items suited for the Americans’ taste along with a good nutritional quality in the near future.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.4
• /
• pp.297-306
• /
• 2023

Saemangeum Lake is the largest artificial lake in Korea. The continuous deterioration of lake water quality necessitates the introduction of novel water quality management strategies. Therefore, this study aims to identify the spatiotemporal water quality characteristics of Saemangeum Lake using data from the National Water Quality Measurement Network and provide basic information for water quality management. In the water quality parameters of Saemangeum Lake, water temperature and total phosphorous content were correlated, and salt, total nitrogen content, pH, and chemical oxygen demand were significantly correlated. Other parameters showed a low correlation. The spatial principal component analysis of Saemangeum Lake showed the characteristics of its four zones. The mid-to-downstream section of the river affected by freshwater inflow showed a high nutrient salt concentration, and the deep-water section of the drainage gate and the lake affected by seawater showed a high salt concentration. Two types of water qualities were observed in the intermediate water area where river water and outer sea water were mixed: waters with relatively low salt and high chemical oxygen demand, and waters with relatively low salt and high pH concentration. In the principal component analysis by time, the water quality was divided into four groups based on the observation month. Group I occurred during May and June in late spring and early summer, Group II was in early spring (March-April) and late autumn (November-December), Group III was in winter (January-February), and Group IV was in summer (July-October) during high temperatures. The water quality characteristics of Saemangeum Lake were found to be affected by the inflow of the upper Mangyeong and Dongjin rivers, and the seawater through the Garuk and Shinshi gates installed in the Saemangeum Embankment. In order to achieve the target water quality of Saemangeum Lake, it is necessary to establish water quality management measures for Saemangeum Lake along with pollution source management measures in the upper basin.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.3
• /
• pp.179-188
• /
• 2023

Purpose. The purpose of this study was to evaluate the effect of surface treatments on the shear bond strength of two types of zirconia (3-TZP and 5Y-PSZ) with resin cement. Materials and methods. Two different types of zirconia specimens with a fully sintered size of 14.0×14.0×2.0 mm³ were prepared, polished with 400, 600, and 800 grit silicon carbide paper, and buried in epoxy resin. They were classified into four groups each control, sandblasting, primer, and sandblasting & primer. Cylindrical resin adhered to the surface-treated zirconia with resin cement. It was stored in distilled water (37℃) for 24 hours, and a shear bond strength test was performed. The normality of the experimental group was confirmed with the Kolmogorov-Smirnov & Shapiro-Wilk test. The interaction and statistical difference were analyzed using a two-way ANOVA. A post-hoc analysis was performed using Dunnett T3. Results. As a result of two-way ANOVA, there was no significant difference in shear bonding strength between zirconia types (P > .05), but there was a significant correlation in the sandblasting, primer, and alumina sandblasting & primer group (P < .05). Dunnett T3 post-test showed that, regardless of the type of zirconia, shear bonding strength was sandblasting & primer > Primer > sandblasting > control group (P < .05). Conclusion. There was no difference in shear bond strength between the types of zirconia. The highest shear bond strength was shown when the mechanical and chemical treatments of the zirconia surface was performed simultaneously.

• The Korean Journal of Zoology
• /
• v.13 no.3
• /
• pp.68-74
• /
• 1970

In the previous studies, the present author found that high proportion of the follicular oocytes from mouse and rabbit ovaries are able to resume their maturation division in the anterior chamber of the eye in which they have been incubated by auto- or homoplastic transplantation. Especially in the case of the homoplastic transplantation, it was known that no trouble has been detected in the process of resumption of the oval maturation in particular connection with the antigen-antibody reaction between donor and recipient. These findings provide a possibility that the follicular oocytes from various animals would be matured in the eye even after the xenoplastic transplantation. Under such an assumption, the present studies were performed to examine the behavior of the follicular oocytes in the eye chamber of the animals of different species. For the donor of the follicular oocytes, domestic rabbits, albino rats of Sprague-Dowley strain, and albino mice of A-strain bred in our laboratory were used. The oocytes obtained from the ovarian follicules were introduced to the anterior chamber of the eye of different species of animals, with an exception of rabbit in which only the female animals were used as a recipient. The procedures of collection of ova, introduction to the eye, harvest from the eye ball, fixation, and staining were the same as mentioned in the previous reports (Cho, 1967b; Cho and Kim, 1968). The conclusions obtained are summarized as below. 1. The rabbit follicular oocytes are able to mature in the eye chambers of both male mouse and rat, although the proportion of the maturation is lower than when they are incubated autoplastically in the eye. When the ova were incubated in the male mouse eye for 24 hours, 21 per cent of them showed chromosomes at metaphase I and II, whereas the rate was 32 per cent when they were incubated in the eye of the male rat. These are apparently low comparing to the rate of 52 per cent of autoplastic transplantation. 2. When rat follicular oocytes were transferred into the mouse eye chamber and recovered after 24 hours, 43 per cent of them produced the mataphase I and II chromosomes. This proportion was higher than the result of the homoplastic transplantation which yielded 23 per cent of the ova on maturation. 3. The most striking result was found in the experiment with mouse follicular oocytes. Seventy-six per cent of the oocytes resumed their maturation division within 24 hours after they were transferred into the male rat eye chamber, and this figure was significantly high compared to the result o 55 per cent obtained by the homoplastic transplantation. In the rat eye, the induction of the degenerative ova also was low (19%). On the other hand, the proportion of the oval maturation decreased to 45 per cent, while that of degeneration increased 33 per cent when they were incubated in the eye of the female rabbit. 4. It was apparent from the present experiments that the follicular oocytes can reveal their activation to maturation in the eye chamber which contains aqueous humor which is known to be composed of low protein content and of very little gamma-globulin which acts as an antibody(Oser, 1965), and that it shows higher osmolarity than blood serum(Levene, 1958). Taking these properities into consideration the humor may provide unfavourable environment to the cells and tissues incubated in. However, it could be noteworthy finding that only the follicular oocytes in the eye of the different species can grow in healthy condition although the maturation rates are varied with the animal species. The fact that the rabbit follicular oocytes show the lower proportion in maturation may be due to the greater amount of the yolk granules in the egg cytoplasm than those in the mouse and rat oocytes. That the mouse oocytes incubated in the eye of the rat mouse and rat oocytes. That the mouse oocytes incubated in the eye of the rat resumed their maturation process in greater proportion would e explained by the fact that the rat eye chamber particularly provides the better environment to the mouse oocytes than the eye chamber of mouse does.

• Korean Journal of Breeding Science
• /
• v.51 no.4
• /
• pp.386-394
• /
• 2019

Rehmannia glutinosa, one of the major medicinal crops in Korea, can be classified into three types: fresh, dried and prepared Rehmannia root. In this study, the quality characteristics of prepared rehmannia root were evaluated using four different cultivars that are commonly used in the market. In making prepared rehmannia root, roots of Jihwang 1, Kokang, Togang, and Dagang were dried, soaked in rice wine, and steamed nine times. At each stage, physiochemical properties were analyzed, including yield, which is one of the most important industrial factors to consider. The yield was the highest in Togang at 23.61% and the lowest in Dagang at 21.16%. These yield values showed a highly negative correlation with the moisture content of roots. The fructose and glucose contents were increased during the 3^rd, 4^th and 5^th steaming but then decreased. The sucrose, raffinose, and stachyose content gradually decreased during the first three steaming and were not detected during the 4^th steaming. Additionally, the catalpol content was not detected after the 4^th steaming. On the contrary, the 5-hydroxymethylfurfural content was not detected in the raw root but increased during the steaming. Jihwang1 and Togang exceeded the 0.1% Korean Pharmacopoeia standard after the 5^th steaming, reaching it faster than did the other cultivars. Overall, Togang was the optimal cultivar considering the overall characteristics of its high yield and short steaming time. These results could provide useful information for the industrial use of prepared Rehmannia root based on the requirements and characteristics of each cultivar.

• Journal of the Korean Society of International Agriculture
• /
• v.31 no.3
• /
• pp.249-254
• /
• 2019

'Japonica 6' is a japonica rice variety developed from a cross between 'MS11', the beginning variety adaptable to tropical region, and 'IR86743-28-1-4', an elite line of high yield and good plant type by a Korea(RDA)-IRRI cooperative breeding program at IRRI in 2017. The growth duration of 'Japonica 6' is 121 days from sowing to harvest. It is 10 days later than that of the check variety 'MS11'. The culm length of 'Japonica 6' is 70 cm, and 1,000-brown rice grain weight is 26.7 g. It has a shorter culm and a larger grain. size than that of MS11. 'Japonica 6' is moderately resistant to blast disease but susceptible to bacterial blight, tungro virus and plant hoppers. The milled rice recovery rate of 'Japonica 6' is improved than that of 'MS11'. The head rice rate of 'Japonica 6' is significantly higher than that of 'MS11'. Yield of 'Japonica 6' is averagely 3.59 MT/ha of milled rice in 5 areas of the Philippines. The 'Japonica 6' was registered in Philippines and would be adaptable to the diverse regions of tropical Asia (Registration No in Philippines. BPI-NSIC-2017-Rc 484SR).

• Journal of the Korean Society of International Agriculture
• /
• v.31 no.1
• /
• pp.8-16
• /
• 2019

Alternatives for increasing the competitiveness of locally manufactured agricultural machinery in domestic and foreign markets has been proposed. This was done by analyzing the major agricultural machinery's price and market share as well as their performance and quality. In the Korean domestic market, the market share of Japanese agricultural machinery has been identified to be 14.5% for tractors, 31.1% for combine harvesters, and 35.8% for rice transplanters, and on track for further increase. Japanese manufacturers' domestic patent shares are 58.5% for tractors, 79.9% for combine harvesters, and 69.8% for rice transplanters, showing the dire need for Korean domestic firms to expand their technological rights. To strengthen the industrial competitiveness of agricultural machinery, therefore, researches that develop the fundamental and elemental technology to reduce the frequency of breakdown should be needed in the short term. To achieve this, it is imperative to establish technology roadmap, promote greater cooperation between academia and industry, and systematically increase research funding. In addition, as a long-term solution for enhancing the competitiveness, an establishment of Agricultural Equipment Technology Institute is strongly recommended to systematically support R&D for developing core technologies, particularly high-quality components that guarantee durability and quality.