• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.628-629
• /
• 2012

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.64-65
• /
• 2013

• Current Research on Agriculture and Life Sciences
• /
• v.27
• /
• pp.7-11
• /
• 2009

Persimmon occupied the second largest cultivation area next to apple among the fruits in Korea. Since 70 % of its cultivating field is located at slope, the efficiency of its harvesting operation is very low. Also, the traditional high-ground trimmer show very low efficiency due to its structure problem.. In this paper, a high-ground trimmer which is a persimmon cultivator was developed by solving the problem of a traditional high ground trimmer. The results of the research are summarized as follows : 1. In case of the developed hydraulic type high ground trimmer, the required average lever tension is 2.9 N. 2. However, the required average tension force of the existing spring type is 25.5 N, which was 8.7 times greater than developed hydraulic lever type trimmer in this study.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.5
• /
• pp.55-62
• /
• 2019

In this paper, we consider K-user multiple-input multiple-output (MIMO) interference channel and present a transceiver design for simultaneous wireless information and power transfer (SWIPT) systems. In addition, we consider a SWIPT system where an information decoding receiver and an energy harvesting receiver are co-located at the same receiver. In the proposed scheme, signal-to-leakage plus noise ratio (SLNR) is used as a cost function and a transceiver is designed to satisfy the threshold of the harvested energy. More specifically, transmitter precoding vector, receiver filter vector, and power spitting factor are simultaneously designed to maximize SLNR with a constraint on the harvested energy. Through computer simulation, we compare the signal-to-interference plus noise ratio (SINR) performance of the proposed and conventional schemes. When a special condition among the number of transmit antennas, receive antennas, and users is satisfied, the proposed scheme showed better SINR performance than the conventional scheme at low signal-to-noise ratio (SNR) range. Also, when the condition is not satisfied, the proposed scheme showed better performance than the conventional scheme at all SNR range.

• Membrane Journal
• /
• v.34 no.1
• /
• pp.30-37
• /
• 2024

As a promising method to address global water scarcity, sorbent-assisted water harvesting from air has shown great potential to deliver drinking water for inlands lacking traditional water sources. In this article, the recent studies of using metal-organic frameworks (MOFs) as sorbents to harvest atmospheric water will be introduced. Compared to the other sorbent materials such as zeolites or silica-based materials, MOFs have shown prospective properties such as the water isotherm inflection points as low as ~10%, which are suitable for harvesting water at dry regions. Due to this property, recently, MOFs have been extensively adopted to develop practical water harvesting devices that can harvest water. Since atmospheric water is accessible anywhere and anytime in the world, this technology is expected to open a new avenue in terms of securing safe water for the future.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.6
• /
• pp.719-729
• /
• 2017

Recently, the field of agriculture has been gaining a new leap with the integration of ICT technology in agriculture. In particular, smart farms, which incorporate the Internet of Things (IoT) technology in agriculture, are in the spotlight. Smart farm technology collects and analyzes information such as temperature and humidity of the environment where crops are cultivated in real time using sensors to automatically control the devices necessary for harvesting crops in the control device, Environment. Although smart farm technology is paying attention as if it can solve everything, most of the research focuses only on increasing crop yields. This paper focuses on the development of a system architecture that can harvest high quality crops at the optimum stage rather than increase crop yields. In this paper, we have developed an architecture using apple trees as a sample and used the color information and weight information to predict the harvest time of apple trees. The simple board that collects color information and weight information and transmits it to the server side uses Arduino and adopts model-driven development (MDD) as development methodology. We have developed an architecture to provide services to PC users in the form of Web and to provide Smart Phone users with services in the form of hybrid apps. We also developed an architecture that uses beacon technology to provide orchestration information to users in real time.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.529-538
• /
• 2002

콤바인 곡물 포대 자동화장치개발은 콤바인 운전자 및 작업자의 피로경감과 안전보호 및 작업성능의 향상을 기하기 위하여 행하여 졌으며, 본 연구의 개발은 기존의 콤바인 작업이 2명이 소요되는 것을 운전자 1명이 수확작업을 할 수 있도록 하며, 노동력의 절감과 작업의 편리성을 도모하고자 하였다. 이러한 본 연구의 결과는 다음과 같다. 1) 곡물 포대의 정 위치화를 위해서 용량형 근접위치센서를 설치하였으며, 포대의 과다이송에 따른 모터의 부하를 최소화 하기위해 선단부와 슈트부에 각각 위치센서를 설치하여 포대의 위치를 제어하였다. 2) 곡물 투입장치부의 작동은 공기압축기와 공압실린더를 이용한 공압시스템을 사용하였으며, 곡물의 투입량제어는 슈트부 게이트의 열림시간을 제어하여, 곡물의 투입량을 제어하였다. 3) 포대 배출장치는 이송장치로부터 이송되어진 충진된 포대를 제 2의 포대가 충진하는 영역 밖으로 밸트 컨베이어를 이용 이송하도록 하였다. 4) 포대는 B3 포대의 경우가 가장 투입량이 많은 것으로 나타났으며, 가진을 한 경우가 하지 않은 경우보다 비교적 투입량이 많은 것으로 나타났다. 본 연구에서 개발된 포대 자동화장치에서는 포대의 가진 장치를 장착하지 않았으며, 실험은 인위적으로 가진을 하여 실행하였으며, 향후 전체적인 장치의 성능 향상을 위해서 포대의 가진 장치가 필요한 것으로 나타났다.

• Korean Journal of Agricultural Science
• /
• v.3 no.1
• /
• pp.95-104
• /
• 1976

This study was conducted to test the harvesting operation of two kinds of rice varieties such as Milyang #15 and Tong-il with a imported two furrow Japanese combine and was performed to find out the operational accuracy of it, the adaptability of this machine, and the feasibility of supplying this machine to rural area in Korea. The results obtained in this study are summarized as follows; 1. The harvesting test of the Milyang #15 was carried out 5 times from the optimum harvesting operation was good regardless of its maturity. The field grain loss ratio and the rate of unthreshed paddy were all about 1 percent. 2. The field grain loss of Tong-il harvested was increased from 5.13% to 10.34% along its maturity as shown in Fig 1. In considering this, it was needed that the combine mechanism should be improved mechanically for harvesting of Tong-il rice variety. 3. The rate of unthreshed paddy of Tong-il rice variety of which stem was short was average 1.6 percent, because the sample combine used in this study was developed on basisof the long stem variety in Japan, therefore some ears owing to the uneven stem of Tong-il rice could nat reach the teeth of the threshing drum. 4. The cracking rates of brown rice depending mostly upon the revolution speed of the threshing drum(240-350 rpm) in harvesting of Tong-il and Milyang #15 were all below 1 percent, and there was no significance between two varieties. 5. Since the ears of Tong-il rice variety covered with its leaves, a lots of trashes was produced, especially when threshed in raw materials, and the cleaning and the trashout mechanisms were clogged with those trashes very often, and so these two mechanisms were needed for being improved. 6. The sample combine of which track pressure was $0.19kg/cm^2$ could drive on the soft ground of which sinking was even 25cm as shown in Fig 3. But in considering the reaping height adjustment, 5cm sinking may be afford to drive the combine on the irregular sinking level ground without any readjustment of the resaping height. 7. The harvesting expenses per ha. by the sample combine of which annual coverage area is 4.7 ha. under conditions that the yearly workable days is 40, percentage of days being good for harvesting operation is 60%, field efficiency is 56%, working speed is 0.273m/sec, and daily workable hours is 8 hrs is reasonable to spread this combine to rural area in Korea, comparing to the expenses by the conventional harvesting expenses, if mechanical improvement is supplemented so as to harvest Tong-il rice. 8. In order to harvest Tong-il rice, the two furrow combine should be needed some mechanical improvements that divider can control not to touch ears of paddy, the space between the feeding chain and the thrshing drum is reduced, trash treatment apparatus must be improved, fore and rear adjust-interval is enlarged, and width of track must be enlarged so as to drive on the soft ground.

• Journal of Biosystems Engineering
• /
• v.22 no.4
• /
• pp.411-420
• /
• 1997

The mechanization efficiency using high ability machines such as tractors or combines in a paddy field rice farm is high. Mechanization in harvesting fruits and vegetables is difficult, because they are easy to be damaged. Therefore, Advanced techniques for careful handling fruits and vegetables are necessary in automation and robotization. An apple harvesting robot must have a recognition device to detect the positioning of fruit, manipulators which function like human arms, and hand to take off the fruit. This study is related to the development of a rotatic hand as the first stage in developing the apple harvesting robot. The results are summarized as follows. 1. It was found that a hand that was eccentric in rotatory motion, was better than a hand of semicircular up-and-down motion in harvesting efficiency. 2. The hand was developed to control changes in grasp forces by using tape-type switch sensor which was attatched to fingers' inside. 3. Initial finger positioning was set up to control accurate harvesting by using a tow step fingering position. 4. This study showed the possibility of apple harvesting using the developed robot hand.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.02a
• /
• pp.393-399
• /
• 2003

산업의 발전과 더불어 농업인구는 해마다 감소하고 있으며 농업 연령층은 고령화 현상이 나타나고 있다. 전체 농가인구와 호당 농업인구가 줄어들고 있는데 반해 호당 경지면적은 매년 증가하고 있다. 노동력은 농업생산비의 가장 큰 비중을 차지하고 있고, 농가의 연령층 또한 고령화가 되어가고 있음을 고려해 본다면 농업의 기계화ㆍ자동화의 필요는 절대적이다. 수확은 재배 과정 가운데 노동력, 시간 및 비용이 가장 많이 소요되는 작업이다. 본 연구는 수확용 매니퓰레이터의 개발을 위한 기구학적 분석을 하는 것이다. 구체적인 연구 목적은 매니퓰레이터의 정방향 기구학 및 역방향 분석을 통해 방정식을 구한 후 장치를 작동시켜 반복오차를 측정한 후 이 값을 이론값과 비교하여 검증하도록 하였다. (중략)