• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.122-122
• /
• 2018

1. 배경 최근 IoT 기술이 발전함에 따라 각종 전자기기에 들어가는 센서들이 점점 늘어나고 있다. 특히 사용자 중심의 기기들은 기술이 발전함에 따라 집적화가 이루어지면서, 하나의 기기에서 온도, 습도, 조도 등의 다양한 정보를 처리하고 있다. 이에 따라 더 많은 기능을 사용하기 위해, 소모 전력 또한 점차 증가하고 있다. 그러나 부피는 한정되어 있어, 기존 배터리만으로는 증가하는 소모 전력을 모두 보완하기 어렵다. 또한 대표적인 사용자 중심 기기인 스마트폰에서는, 가장 많은 전력을 소모하는 부분이 점점 커지고 있다. 이에 대한 대책으로 버려지는 에너지를 수확하여 전기적인 에너지로 바꿔주는 에너지 하베스팅 기술이 각광을 받고 있다. 에너지 하베스팅 기술은 바람, 진동, 인체의 움직임 등의 기계적 에너지, 태양광, 실내등의 빛 에너지를 전기적인 에너지로 바꿔주는 기술을 말한다. 본 연구에서는 강유전체 고분자 내부에 양자점이 임베딩된 박막을 이용하여, 스마트폰에서 발생하는 빛 에너지와 손가락으로 디스플레이를 터치할 때 발생하는 기계적인 에너지를 모두 수확할 수 있는 새로운 소자를 제시하였다. 소자 내부에 있는 양자점은 빛 에너지를 산란 혹은 흡수하여 발광한 후, 고분자 내부의 전반사를 통해 양 옆에 있는 태양전지로 빛을 전달한다. 또한 컴포짓의 매트릭스를 이루고 있는 강유전체 폴리머인 P(VDF-TrFE)는 강유전 특성을 통해 마찰전기 에너지를 효율적으로 전기 에너지로 전환할 수 있다. 강유전체 특성에 의해 P(VDF-TrFE) 내부에 정렬된 Polarization은 퀀텀닷에 양자구속 스타크 효과(Quantum Confined Stark Effect)를 일으켜 더 긴 파장을 방출한다. 이렇게 바뀐 파장은 실리콘 태양전지에서 더 많이 흡수할 수 있는 영역으로 방출되어 태양전지 출력의 증가를 일으킨다. 마지막으로 실리콘 태양전지의 출력 증가를 보여줌으로써 이를 실험적으로 입증했다.

• Journal of Biosystems Engineering
• /
• v.3 no.2
• /
• pp.88-99
• /
• 1978

In this study, rice harvesting systems suitable to Korean situations and the optimum timing of these systems were determined, respectively, based on experimentally determined factors such as filed yield and the milling quantity and quality measured at various levels of the grain moisture content at harvest. Rice varieties used for the experiment were the AKIBARE (Japonica-type) and the SUWEON 251 (high yielding TONGIL sister-line variety), The harvesting systems studied by the experimental work of this study were traditional system with both the wet material and dry-material threshing system by use of binder with both the dry-material and wet-material threshings, and system by use of combine. Grain samples were taken from final products of the paddy rice harvested from the experiment a fields for each system to measure the recovery rates of the milled rice. The results may be summarized as follows; 1. The milling recovery rate of the AKIBARE variety had highest value within the range of the grain moisture at harvest, showing from 21 to 26 percent. The head-rice recovery for the same variety was a little greater in the wet-material threshing than in the dry-material threshing , higher values of which , were 20 to 25 percent , seen within the range of grain moisture at harvest regardless of the harvesting systems tested. 2. The milling recovery of the SUWEON 251 , when tested for different harvesting systems and harvesting grain moisture, did not show a statistically significant different. In contrast , head-rice recovery for the systems operated by the wet-material threshing was much greater than that by the -material threshing. The difference of the recoveries between these systems range from 2.6 to 4.7 percent. 3. An assessment of the optimum period of -harvest timing for each of the harve\ulcornersting systems tested were made bJ.sed on (a) the maximum total milled-rise yield and (b) the percentage reduction in the total milled-rice yield due to untimely harvest operations. The optimum period determined are: 23-19% for the ATD, AC, STD, SBW, STW systems, 25-21% for the ATW ani ABW systems, and 27-18% for the ABD, SBD, and SC systems, respectively.

• Journal of Drive and Control
• /
• v.20 no.2
• /
• pp.40-46
• /
• 2023

Fresh corn, one of the main food crops, must be harvested by hand. A harvest mechanization technology is required. In this study, a tractor-attached harvester was designed and manufactured to sequentially perform stem reaping, fresh corn detaching, and collecting. The(harvester was designed so that the main device could operate through a hydraulic pump and a generator could be operated through the tractor's PTO. Factor tests were conducted according to cultivars (Ilmichal, Super sweet corn) and working speed (0.12 m/s, 0.17, 0.22). After the factor test, detached corns ratio, collected corns ratio, and damaged corns ratio were analyzed and harvest performance was evaluated. Harvesting performance was good for super sweet corn. Considering operation efficiency, 0.22 m/s was judged to be an appropriate working speed. It was found that it took two hours to work an area of 10 a.

• Journal of Drive and Control
• /
• v.20 no.4
• /
• pp.64-70
• /
• 2023

Garlic is classified as one of the three essential seasoning vegetables in Korea. In 2023, it was reported that the area under garlic cultivation was 24,700 ha, and the production stood at 318,220 tons. Garlic harvesting mechanization currently stands at 43.8%, and garlic is still collected manually after digging out using diggers, so the process is labor intensive. To reduce garlic production costs and enhance competitiveness, it is necessary to develop a high-performance gathering type harvester in place of the digging type harvester. Therefore, in this study, a gathering-type garlic harvester that can dig and collect simultaneously was designed and manufactured, and the harvest performance by factor was analyzed through a harvest performance test. As a result of the performance test, it was analyzed to perform optimally at a driving speed of 0.11m/s and a transfer speed of 85rpm. Work performance was calculated using the results obtained from the factor performance test.

• Journal of Drive and Control
• /
• v.21 no.2
• /
• pp.23-29
• /
• 2024

Potatoes are one of the world's four major crops, and domestic consumption is currently increasing in Korea. However, the mechanization rate of potatoes is very low, and especially, harvesting is the most labor-intensive task in potato production. In Korea, potato-collecting work depends on manpower, so it is necessary to develop a gathering-type harvester that can be used for processes from digging to harvesting. Therefore, in this study, a self-propelled-type potato harvester was developed, and its performance was analyzed to mechanize harvesting. The potato harvester was developed to have a crawler-type driving part with a 60 hp diesel engine and consisted of a digging part that digs potatoes from the ground, a vertical transporting part that transfers the dug potatoes to the height of the collection bag, a separating part that separates debris, such as stones and soil, and a collecting part that loads the collection box. A field test of the potato harvester was conducted, and performance was evaluated by the damage, loss, and debris mixing proportions, which were 2.5%, 2.8%, and 2.6%, respectively. The working capacity was 1.2 h/10 a. The economic analysis results showed that the cost of harvesting work could be reduced by 12.7% compared to manual harvesting.

• Journal of Drive and Control
• /
• v.21 no.2
• /
• pp.36-43
• /
• 2024

The yield is basic and necessary information in precision agriculture that reduces input resources and enhances productivity. Yield information is important because it can be used to set up farming plans and evaluate farming results. Yield monitoring systems are commercialized in the United States and Japan but not in Korea. Therefore, such a system must be developed. This study was conducted to develop a yield monitoring system that improved performance by correcting a previously developed flow sensor using a grain tank-weighing system. An impact-plated type flow sensor was installed in a grain tank where grains are placed, and grain tank-weighing sensors were installed under the grain tank to estimate the weight of the grain inside the tank. The grain flow rate and grain weight prediction models showed high correlations, with coefficient of determinations (R2) of 0.9979 and 0.9991, respectively. A main controller of the yield monitoring system that calculated the real-time yield using a sensor output value was also developed and installed in a combine harvester. Field tests of the combine harvester yield monitoring system were conducted in a rice paddy field. The developed yield monitoring system showed high accuracy with an error of 0.13%. Therefore, the newly developed yield monitoring system can be used to predict grain weight with high accuracy.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.4
• /
• pp.459-465
• /
• 1997

This experiment was conducted to compare the change of growth and canopy photosynthesis between transplanting and direct seeding on paddy surface in rice. Total tiller number by the early vegetative growth stage was significantly higher in the direct seeding flooded paddy surface, while it was reversed from later vegetative growth stage in terms of tillering ability per unit period. But total panicle number was higher in direct seeding on paddy surface. Leaf area index, nitrogen content in leaf blade and canopy photosynthetic ability at later vegetative growth stage were lower in direct seeding on flooded paddy surface than transplanting. Biological yield at harvest stge, leaf area index and conopy photosynthetic activity at heading stage were gradually increasing according to nitrogen level increased both transplanting and direct seeding on paddy surface. Leaf area index, canopy photosynthetic activity, however, were lower in direct seeding on paddy surface than transplanting in the same nitrogen level. Nitrogen content per unit leaf area was high in transplanting.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.15
• /
• pp.145-153
• /
• 1974

Five different levels of Ethephon were treated on tobacco cultivar yellow Special A and Coker and harvested for curing. Changes in dehydration properties, yellowing, chlorophyll, nicotine, sugar and starch contents during the processes of curing were studied in order to justify feasibility of adoption an idea of 3-stage-curing method instead of the 5-stage. Ethephon-treated-tobacco leaves showed marked degradation of chlorophyll, greater dehydration and greater reduction in nicotine contents while little change in either sugar, starch and other chemical components. They showed also shorter hours of curing period allowing possible curing response at a relatively low temperature than those without treatment. Thus they undergo only 3 stages of flue-curing processes, yellowing, calor-fixing and vein-drying, and need 72 hours to finish curing, but the ordinary leaves need 100 hours for it.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.432-437
• /
• 2022

In this study, strawberries were grown during the two cultivation periods (first: 2020-2021, second: 2021-2022) to analyze the effect of the external light environment and growing degree days (GDD) on crop production. The temperature and humidity during day in a greenhouse in each cultivation period were similarly managed. At night, there was a statistical difference in temperature and humidity in the greenhouse between two periods. The accumulated solar radiation during the first cultivation period was high in September and October. Since January, the accumulated solar radiation during the second cultivation period was high. In the second cultivation period, the initial yield was small because the accumulated solar radiation and GDD was small. But accumulated yields and potential maximum yields in second cultivation period were larger than yields in the first cultivation period as the accumulated solar radiation and GDD increased. The sugar contents of strawberry decreased as GDD increased.

• Korean Journal of Medicinal Crop Science
• /
• v.7 no.1
• /
• pp.27-30
• /
• 1999

This experiment was carried out to determine the adequate machine peeling and retting time of peony roots, which are used as medicinal resources in Korea. When the roots were peeled for $10{\sim}30$ minitues in the peeling machine, the epidermis of root was removed, and higher yield was obtained and paeoniflorin content as compared with roots which were peeled for longer time. The paeoniflorin content of root varied with the different parts of root. The highest content was recorded in the upper part and the lowest in the middle part. The loss of paeoniflorin increased in the roots processed for expanded peeling and retting time. Lightness of peeled root was higher and ${\Delta}\;E$ was lower in the roots which were peeled by machine for longer time.