• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.2
• /
• pp.56-66
• /
• 2012

The inductive loaded patch antenna with suppressed radiation along the horizontal plane and enhanced broadside gain is investigated by adjusting the width and the via radius of a unit cell at a fixed length of a unit cell. The effects of the via radius and the width of the unit cell on the dispersion characteristics of the inductive loaded transmission line are investigated. The systematic study to determine the via radius and the width of the unit cell for the effective dielectric constant of the inductive loaded patch antenna close to 1 in order to suppress the radiation along the horizontal plane is presented. Inductive loaded patch antennas composed of five unit cells with resonant frequency of 5 GHz are designed and their radiation characteristics are presented. The horizontal radiation along the E-plane is greatly suppressed to less than -15 dBi when the effective dielectric constant of the inductive loaded patch antenna is slightly less than 1.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.8
• /
• pp.743-750
• /
• 2016

Track rollers are the key parts that support the weight applied to the caterpillar track of construction machinery. The operating conditions of construction machinery are harsh; hence, the track rollers exposed to these conditions can experience failures such as oil leakage and breakdown of the machine, because of impacts during driving. The failure of track-rollers has a major effect on the operation of the construction machinery. Therefore, each manufacturer tries to evaluate the performance of their products by conducting a self-test. However, only the vertical loads applied to the track rollers are considered in most of the self-tests. This method has the problem of ignoring the horizontal loads that are applied to the track rollers while rotary driving, and hence it does not create the practical operating condition of the construction machinery. In this study, we have determined the experimental conditions that effectively consider the magnitudes of the vertical and horizontal loads. The results of simulations and experiments conducted to assess the influence of horizontal loads on the failure of track rollers are presented in this paper.

• Journal of Convergence for Information Technology
• /
• v.12 no.5
• /
• pp.177-182
• /
• 2022

This study aim to verify the difference in muscle activity due to difference in the direction of the stroking method for the stroke direction of the muscles using a tool made by a 3D printer. The subjects were conducted with 20 healthy adults in their 20s, and IASTM applied the intervention of the perpendicular stroking on the direction of muscle driving and intervention of the pararell stroking on the direction of muscle driving, with 10 each deployed. All subjects measured the muscle activity before intervention, and the muscle activity was measured and compared with the independent T test and the paired T test. The results of this study showed a significant increase in muscle activity in vertical groups, although the muscle activity in horizontal groups decreased. It was that differences in direction are significant in the application of IASTM.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10b
• /
• pp.448-450
• /
• 2001

본 논문에서는 웨이블릿 변환된 영상으로부터 바코드 영역을 추출하기 위한 한 방법이 제안된다. 일반적으로 택배 등의 물류처리에서 사용되는 바코드는 직선 형태의 바로 구성되어지며, 물체의 윗면에 붙여진 바코드 라벨의 방향에 따라 바코드의 방향은 수직, 수평, 대각선의 방향으로 나타난다. 제안된 방법에서는 이러한 바코드의 수직, 수평, 대각선 방향의 주파수특성을 독립적으로 잘 반영하는 웨이블릿 변환의 특성을 활용하여 각각의 주파수 대역별로 바코드 영역을 검색하여 바코드 영역의 후보를 검출한다. 바코드의 후보 영역이 검출되면, 바코드의 후보 영역은 바코드의 길이 방향의 스캔 및 검증 과정을 통해 바코드 영역인지 최종 판별된다. 다양한 영상에 대한 실험을 통해 제안된 방법이 효과적임이 증명되었다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.4
• /
• pp.23-30
• /
• 2001

In this paper, the discharge image of NO particles wire-cylinder type electrode in the discharge reactor where AC dielectric barrier type corona discharge occurred and horizontal and vertical signal intensity at each flourescence emission during discharge and the horizontal and vertical signal strength of NO particles at flourescence emission wavelength band[236[nm], 247[nm]], were measured were measured by ICCD Camera. In addition discharge images and signal intensities in accordance with discharge time were measured to figure out the discharge mechanism. It was found that the strongest horizontal and vertical signal intensity of NO particles were observed at 247[nm] band, but no big difference in the horizontal and vertical signal intensity in accordance with discharge time was seen. In particular, the phenomenon image occuring inside the discharge reactor and wavelength ware able to be carried based on the measured data.

• Water for future
• /
• v.29 no.4
• /
• pp.187-198
• /
• 1996

A numerical model for unsteady dispersion of horizontal line source in turbulent shear flow is developed. A fractional step finite difference method is used which splits the unsteady two-dimensional advective diffusion equation into the longitudinal advection and the vertical diffusion equations, and solves them alternately for half time intervals by the Holly-Preissmann scheme and the Crank-Nicholson scheme, respectively. The developed numerical model is verified using a semi-analytic solution for steady dispersion in turbulent shear flow. Dispersion of an instantaneous plane source in turbulent shear flow is analyzed using the model. The degree of mixing at the same dimensionless time is almost the same regardless of the friction factor, and the travel distance required to reach a certain degree of mixing is inversely proportional to the square root of the friction factor.

• Aerospace Engineering and Technology
• /
• v.8 no.2
• /
• pp.113-121
• /
• 2009

Shaker system is used to simulate the vibration from the launch environment. The vibration tests are performed in the vertical and lateral direction. For the lateral vibration test, the slip table system is used with shaker system. For the latest large satellite, vibration test adaptor is made of the steel. But slip table of lateral vibration is made of magnesium, so there is big difference of thermal expansion ratio between slip table and vibration test adaptor. This paper encompasses the following items; verification process of thermal characteristics and overturning moment and a solution for lateral vibration test with steel vibration test adaptor.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.3
• /
• pp.45-51
• /
• 2009

Vertical wet equipment was newly developed in stead of horizontal wet equipment which has been widely used for BGA develop process. We intended to eliminate the collision problem between equipment's transferring rollers and fine circuit patterns, which could be achieved by fixing the BGA panel vertically using jig unit. The process characteristics of vertical wet equipment were evaluated by conducting uniformity evaluation, pattern damage evaluation and defect analysis. The process uniformity of the vertical equipment was measured to be the same level as the uniformity of horizontal equipment. And it was measured that $3{\sim}4{\mu}m$ finer circuit pattern could be processed adopting vertical equipment rather than horizontal equipment.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.851-853
• /
• 2002

Bi-2223도체의 종자계 손실에 대하여 실험적으로 조사하였으며, Bi-2223도체의 종자계 손실은 주파수에는 의존하지 않으며, 이는 수직 수평방향의 자장에 대한 자화손실처럼 히스테리시스손실이 지배적임을 의미한다. 또한 측정된 자계 손실은 절충 본수에도 그다지 의존하지 않으며, 필라멘트들 사이가 완전히 비결합된 모델로부터 계산된 손실에 더 유사하고, 수평방향의 자장에 대한 자화손실의 약 1/5정도로 작으며, 따라서 종자계 손실은 전력기기에서 그다지 중요하지 않음을 알수 있었다.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.47-50
• /
• 2001

본 논문에서는 프레임 메모리를 줄이는 간이형 비디오 디코더의 다섯가지 알고리즘을 연구하여 성능을 비교한다. fixed-length ADPCM 기법을 적용하여 메모리를 줄이는 알고리즘과 수평 방향으로 decimation 하는 방법, 그리고 DCT 계수를 filtering 하는 방법을 구현하고 이보다 더 압축률을 높여서 수평 방향으로 decimation 하거나 DCT 계수를 filtering 하는 방법에 ADPCM 기법을 결합한다. 이렇게 함으로써 원래의 비디오 디코더 프레임 메모리의 25% 까지 메모리를 줄일 수가 있다. 메모리 크기를 줄이는 이점 이외에, 하나의 비디오 디코더 구조가 몇가지 압축 모드를 구성하므로 원하는 복잡도와 메모리 크기에 따라 응용이 자유롭다.