• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3D
• /
• pp.461-467
• /
• 2006

To detect individual vehicular speed, double loop detection technique has been widely used. This paper investigates four methodologies to measure individual speed using only a single loop sensor in a traveling lane. Two methods developed earlier include estimating the speed by means of (Case 1) the slop of inductance wave form generated by the sensor and (Case 2) the average vehicle lengths. Two other methods are newly developed through this study, which are estimations by measuring (Case 3) the mean of wheelbases using the sensor installed traversal to the traveling lane and (Case 4) the mean of wheel tracks by the sensor installed diagonally to the traveling lane. These four methodologies were field-tested and their accuracy of speed output was compared statistically. This study used Equality Coefficient and Mean Absolute Percentage Error for the assessment. It was found that the method (Case 1) was best accurate, followed by method (Case 4), (Case 2), and (Case 3).

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2004.11a
• /
• pp.23-25
• /
• 2004

This study was conducted to investigate the effects of dietary supplementation of Ecklonia cava kjellman(ECK) and crude lectin extracted from ECK (CLEEC) on performances and immune responses in broiler chicks. A total of two hundreds thirty four 1 day old male broiler chicks (Ross) were fed corn-soy based diets containing 0 % (with or without vaccination and Salmonella challenge), 1.0 % ECK, 0.05 %, 0.1 % and 0.3 % CLEEC for 38 days and vaccinated against inactivated ND-IB combined oil vaccine on the fourth day. After S. gallinarum challenge. mortality was measured daily. The spleens of birds were removed for RNA extraction and reverse transcription polymerase chain reaction (RT-PCR) with primer sets for IFN-ν, IL-2, IL-6 and ${\beta}$-actin were performed with RNA samples. At the 28th day, pancreas weights were heavier 0.3 % CLEEC than 1.0 % ECK group. At the 21st day after ND-IB oil vaccine injection, dietary supplementation of ECK and CLEEC tended to increase or significantly (P<0.05) improved ND or IB titer compared to the positive control. Mortality was significantly (P<0.05) decreased by dietary CLEEC treatments. Chicken splenic IFN-ν, IL-2, and IL-6 cytokines mRNA expressions were enhanced by challenge with S, gallinarum. Dietary treatments did not affect mRNA expression of IFN-ν. However, IL-2 and IL-6 expressions in Salmonella challenged birds that fed the 1.0 % ECK or 0.05 % CLEEC groups were enhanced (P<0.05) compare to the positive control. The results demonstrated that dietary ECK and CLEEC enhanced humoral and cellular immunity and therefore. it can be concluded that dietary supplementation of ECK and CLEEC can be used as a feed additive for enhancement of immunocompetence without any adverse effects in broiler chicks.

• Radiation Oncology Journal
• /
• v.8 no.2
• /
• pp.183-188
• /
• 1990

Between January 197l and December 1987, 113 patients with nasopharyngeal cancer (NPC) were treated by radiation therapy with or without chemotherapy in the department of Radiation Oncology, Yonsei University Hospital. There were 19 patients under thirty years of age. The histology was undifferentiated carcinoma in $68\%$ of the younger patients as compared to $47\%$ of the older patients. Sex, stage, initial symptoms and treatment modalities differed little from those of older patients. In younger patients, the initial complete response rate was $79\%$ as compared to older patients with $54\%$, distant metastases were more common and the overall five year survival rate was not significantly different between the two age groups ($33.7\%$ for the young vs. $37.4\%$ for the old). The five year survival rates for stage III and IV were $60.0\%$ and $24.5\%$, respectively. Histologic subtype was not correlated with survival. The best survival was found only in patients who obtained a complete clearance of disease after radiation therapy.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.8 no.2
• /
• pp.207-216
• /
• 1997

This study was conducted to investigate the communicative intent between Reactive Attachment Disorder(RAD) and Developmental Language Disorder(DLD). The subject of this study were 20 27-51 monthold children(10 RAD Children, 10 DLD children) functioning at similar stage of language development. The communicative intent was investigated vertical and horizontal dimension. Rating of vertical communicative intent was based on the assessment scales devised by Wetherby and Prutting(1984). Horizontal dimension was measured by the assessment guidelines of Wetherby and Prizant(1989). All the data were rated by two rators independantly. 1) In communicative intent, vertical development level of DLD children was more sophiscated than that of RAD children. 2) DLD children expressed more horizontal communicative intent than RAD children. The percentage of the three major categories(behavioral regulation, social interaction, and joint attention) of communicative intent in DLD children was lined up social interaction>joint attention>behavioral regulation. On the contrary, RAD children displayed in order of behavioral regulation>social interaction>joint attention. In addition, DLD children showed diversely as compared with RAD children.

• Journal of Korean Society of Steel Construction
• /
• v.22 no.4
• /
• pp.325-334
• /
• 2010

In this study, an unbraced five-story steel-framed structure was designed in accordance with KBC2005 to understand the features of structural behavior for the arrangement of semi-rigid connections. A pushover analysis of the structural models was performed, wherein all the connections were idealized as fully rigid and semi-rigid. Additionally, horizontal and vertical arrangements of the semi-rigid connection were adopted for the models. A fiber model was utilized for the moment-curvature relationship of the steel beam and the column, and a three-parameter power model was adopted for the moment-rotation angle of the semi-rigid connection. The top displacement, base-shear force, required ductility for the connection, sequence of the plastic hinge, and design factors such as the overstrength factor, ductility factor, and response modification coefficient were investigated using the pushover analysis of a 2D structure subjected to the equivalent static lateral force of KBC2005. The partial arrangement of the semi-rigid connection was found to have secured higher strength and lateral stiffness than that of the A-Semi frame, and greater ductility than the A-Rigid frame. The TSD connection was found suitable for use for economy and safety in the sample structure.

• Journal of Environmental Impact Assessment
• /
• v.24 no.5
• /
• pp.516-531
• /
• 2015

In this study, a software module to predict the effectiveness of vegetation buffer strip (VBS) has been developed for using with Chemicals, Agricultural Management and Erosion Losses (CAMEL), a distributed watershed model. Most basic functions for the VBS module are same as CAMEL except functions newly developed to implement sedimentation enhancement by vegetation and level spreaders. For verification of the VBS module, sensitivity analyses for length, roughness, soil and vegetation type of VBS were carried out using a test grid cell. The surface discharge of sediment are highly sensitive to the roughness coefficient of VBS. The removal efficiencies of VBS for the surface discharges of sediment and TP are generally high regardless of environment changes. The surface discharges of TOC and TN are highly sensitive to the length and soil of VBS. The removal efficiencies of VBS for the surface discharges of TOC and TN are generally lower than those of sediment and TP. The newly developed VBS module reasonably simulates the removal efficiencies of surface discharges that vary according to the environment changes. It is expected that this VBS module can be used for evaluating the effectiveness of VBS-based best management practices to be applied to reduce pollution discharges from various non-point sources.

• Geophysics and Geophysical Exploration
• /
• v.4 no.2
• /
• pp.25-33
• /
• 2001

Loop-loop electromagnetic (EM) survey in frequency domain has been carried out in order to provide basic solution to geotechnical applications. Source and receiver configuration may be horizontal co-planar (HCP) and/or vertical co-planar (VCP). Three quadrature components of mutual impedance ratio for each configuration are used to construct the subsurface image. For the purpose of obtaining the model response and validating the reasonable performance of the inversion, we obtained each responses of two-layered and three-layered earth models and two-dimensional (2-D) isolated anomalous body. The response of 2-D isolated anomalous body has been calculated using extended Born approximation for the solution of 2.5-D integral equation describing EM scattering problem. As a result of the least-squares inversion with variable Lagrangian multiplier, we could construct more resolvable image from HCP data than VCP data. Furthermore, joint inversion of HCP and VCP data made better stability and resolution of the inversion. Resistivity values, however, did not exactly match the true ones. Loop-loop EM field data was obtained with EM34-3XL system manufactured by Geonics Ltd. (Canada). Electrical resistivity survey was conducted on the same line for the comparison in advance. Since the constructed image from loop-loop EM data by 2-D inversion algorithm showed almost similar resistivity distribution to that from electrical resistivity one, we expect the developed 2.5-D loop-loop EM inversion program can be applied for the reconnaissance site survey.

• Journal of Wetlands Research
• /
• v.23 no.1
• /
• pp.94-105
• /
• 2021

Two vertical flow biofilters in series (BFS) employing synthetic fiber (FBF) followed by woodchip (WBF) was investigated in order to assess its potential as an alternative to the typical vertical-horizontal flow configuration in removing nonpoint source pollutants specifically nutrients and organics. These lab-scale column biofilters were operated for 176 days alongside three other columns that were added for control and sampling purposes. The biofilter columns were fed with either a semi-artificial piggery stormwater or artificial stormwater with specific ammonia and nitrate contents. Results reveal that the BFS was more effective than a single biofilter in removing pollutants especially nitrogen. FBF was found to remove up to 100% of ammonia from the stormwater with corresponding increase in nitrate in the outflow which shows evidence of active nitrification. Meanwhile, the succeeding vertical WBF was able to subsequently remove 77% of the nitrate. The effective reduction of nitrate in a vertical flow biofilter was believed to be due to the use of woodchip which can provide a carbon source that is required for denitrification. However, further investigation is needed to support this claim. Nonetheless, the study shows the potential of vertical flow BFS as a nitrogen removal mechanism especially in areas where enough land space for horizontal flow biofilters is limited.

• Journal of Bio-Environment Control
• /
• v.29 no.2
• /
• pp.161-170
• /
• 2020

There is systematic spatial variations in environmental properties due to sensitive reaction to external conditions at plastic greenhouse occupied 99.2% of domestic agricultural facilities. In order to construct 3 dimensional distribution of temperature, relative humidity, CO₂ and illuminance, measurement matrix as 3 by 3 by 5 in direction of width, height and length, respectively, dividing indoor space of greenhouse was designed and tested at experimental site. Linear regression analysis was conducted to evaluate optimal estimation method in terms with horizontal and vertical variations. Even though sole measurement point for temperature and relative humidity could be feasible to assess indoor condition, multiple measurement matrix is inevitably required to improve spatial precision at certain time domain such as period of sunrise and sunset. In case with CO₂, multiple measurement matrix could not successfully improve the spatial predictability during a whole experimental period. In case with illuminance, prediction performance was getting smaller after a time period of sunrise due to systematic interference such as indoor structure. Thus, multiple sensing methodology was proposed in direction of length at higher height than growing bed, which could compensate estimation error in spatial domain. Appropriate measurement matrix could be constructed considering the transition of stability in indoor environmental properties due to external variations. As a result, optimal measurement matrix should be carefully designed considering flexibility of construction relevant with the type of property, indoor structure, the purpose of crop and the period of growth. For an instance, partial cooling and heating system to save a consumption of energy supplement could be successfully accomplished by the deployment of multiple measurement matrix.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.18 no.4
• /
• pp.233-241
• /
• 2016

Experiments were carried out to quantify the topographic effects on attenuation of sunshine in complex terrain and the results are expected to help convert the coarse resolution sunshine duration information provided by the Korea Meteorological Administration (KMA) into a detailed map reflecting the terrain characteristics of mountainous watershed. Hourly shaded relief images for one year, each pixel consisting of 0 to 255 brightness value, were constructed by applying techniques of shadow modeling and skyline analysis to the 3m resolution digital elevation model for an experimental watershed on the southern slope of Mt. Jiri in Korea. By using a bimetal sunshine recorder, sunshine duration was measured at three points with different terrain conditions in the watershed from May 15, 2015 to May 14, 2016. The brightness values of the 3 corresponding pixel points on the shaded relief map were extracted and regressed to the measured sunshine duration, resulting in a brightness-sunshine duration response curve for a clear day. We devised a method to calibrate this curve equation according to sky condition categorized by cloud amount and used it to derive an empirical model for estimating sunshine duration over a complex terrain. When the performance of this model was compared with a conventional scheme for estimating sunshine duration over a horizontal plane, the estimation bias was improved remarkably and the root mean square error for daily sunshine hour was 1.7hr, which is a reduction by 37% from the conventional method. In order to apply this model to a given area, the clear-sky sunshine duration of each pixel should be produced on hourly intervals first, by driving the curve equation with the hourly shaded relief image of the area. Next, the cloud effect is corrected by 3-hourly 'sky condition' of the KMA digital forecast products. Finally, daily sunshine hour can be obtained by accumulating the hourly sunshine duration. A detailed sunshine duration distribution of 3m horizontal resolution was obtained by applying this procedure to the experimental watershed.