• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.12 no.1
• /
• pp.43-49
• /
• 2007

The methods of physical oceanographic surveys to examine the effect of thermal discharge from nuclear power plants in Korea have been reviewed and a standard guide to the survey is proposed. It is desirable that in situ observation and numerical thermal diffusion modeling are conducted simultaneously to describe the variation in temperature distribution affected by thermal discharge from a power plant because any observation or numerical modeling alone has limits to do so quantitatively. It is suggested that the field observation must be based on the concept of heat budget modeling considering all artificial and natural heat sources/sinks around the power plant. Any results from numerical modeling must reach to a certain statistical significance level to use for a standard temperature distribution. In addition, the development of standard numerical codes is proposed to improve the problems shown in the past numerical circulation and diffusion modelling.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.12 no.4
• /
• pp.639-648
• /
• 1999

레이더법은 건축구조물에 대한 비파괴 검사의 대표적인 방법의 하나이다. 레이더법을 이용하는데 영향을 주는 요인들을 연구하고, 레이더로 측정된 결과들을 분석하기 위해서는 전자기파의 전파에 대한 수치적인 모델링을 통한 이론적인 접근이 필요하다. 콘크리트 시편에 전파되는 전자기파를 모델링 하기 위해 유한차분 시간영역법을 적용하고자 한다. 유한차분 시간영역법은 전자파 해석과 모델링을 통한 시뮬레이션에 매우 유용한 방법이다. 본 연구에서는 유한차분 시간영역법을 이용하여 두께가 다른 4개의 시편과 두께는 100㎜로 동일하고 피복두께가 다른 3개의 시편을 3차원으로 모델링 하였다. 두께 측정 모델링 결과에서는 계산영역의 셀간격과 입사파의 파장/콘크리트 시편의 두께값이 모델링의 정확성에 미치는 영향을 알 수 있었다. 철근이 있는 시편의 모델링에서는 0.08%∼0.5%의 오차로 철근의 위치를 확인할 수 있었다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.5 no.1
• /
• pp.43-54
• /
• 2003

In the deign of cut and cover tunnel, the structural analysis such as rigid frame analysis has been used for its simplicity and convenience. The structural analysis, however, can not consider the geological and geotechnical factors such as soil arching effect. In this study, the dominant factors influencing the behavior of cut and cover tunnel such as interface element, slope of excavation plane, distance between slope and tunnel lining, and location of slope of covered soil, were investigated by the numerical analysis to develop the analysis technique and design technology. Based on the results, the variation of bending moment, shear stress, axial force and displacements were evaluated and analyzed for each factor.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.11a
• /
• pp.7-10
• /
• 2011

최근 국제우주정거장에서 화재안전에 관한 중요성의 인식으로 화재의 감지/소화의 메커니즘을 구체적으로 이해하기 위한 다양한 연구들이 시도되고 있다. 본 연구에서는 국제우주정거장에서 각종 실험과 연구를 진행하는 가압모듈을 대상으로 환기, 연기거동 및 감지에 관한 수치모델링을 수행하였다. 수치모델링은 NIST에서 개발된 FDS (Fire Dynamic Simulator)가 사용되었다. 국제우주정거장 내부는 마이크로중력환경으로 부력이 존재하지 않아 화재 발생 시 화염 및 연기거동은 지상에서의 현상들과 큰 차이를 보이게 된다. 따라서 현재 가압모듈에서 적용되고 있는 환기조건의 변화에 따른 연기거동 및 감지특성에 대한 연구는 향후 국내의 국제 우주정거장 실험 참여를 위한 기초적인 정보를 제공할 것으로 기대된다.

• Tunnel and Underground Space
• /
• v.18 no.4
• /
• pp.280-288
• /
• 2008

Since blast-induced vibration may cause serious problem to the rock mass as well as the nearby structures, the prediction of blast-induced vibration and the stability evaluation must be performed before blasting activities. Dynamic analysis using measurement vibration waveform which is measured by bore hole blasting or test blasting has been increased recently in order to analyze the effect of the blast-induced vibration. The waveform made by bore hole blasting has the similar vibration level and duration to those the waveform of sing hole has. However, there can be a little difference in attenuation characteristics with the blast induced vibration waveform in the field. Through the superposition modeling of single hole waveform, I obtained the vibration waveform on the blasting condition changes and conducted dynamic analysis using this waveform in this study.

• 한국지형공간정보학회:학술대회논문집
• /
• 2004.10a
• /
• pp.33-37
• /
• 2004

고해상 입체 위성영상 엄밀 모델링(Rigorous Modeling)을 구현하고, 이를 기반으로 각 입체시 영상을 제작하여 3차원 정확도 평가를 수행하였다. 본 연구 지역으로 진주지역의 SPOTS 입체영상을 이용하였으며, 각 영상별 기준점 자료는 1/5000 수치지도를 이용하여 입체영상의 중복영역 내에 균등하게 지상기준점 40점을 추출하였다. 추출된 점을 각각 기준점과 검사점으로 구분하여 엄밀 모델링의 정확도를 분석하였다. 또한, 입체시 제작시에 기준점으로 사용된 지상좌표와 이에 대응하는 영상점을 이용하여 입체시 영상을 제작하였다. 제작된 입체시 영상에서 동일점을 획득하기 위해 영상 매칭 및 수치해석도화기(Helava System)를 이용하여 정확한 영상점을 획득하여 3차원 좌표를 계산하여 정확도 평가를 수행하였다.

• Convergence Security Journal
• /
• v.9 no.1
• /
• pp.39-44
• /
• 2009

To get legitimacy of a security investment, the analysis of ROI about the security investment is required. In this paper, we suggest a practical quantitative model with considering factors that do decision-making of optimized security investment difficult. This model makes use of the value of a residual risk to decide the best information security solution and considers a corelation of response techniques of the information security solution against each threat to do exact decision-making.

• The Journal of Engineering Geology
• /
• v.6 no.3
• /
• pp.119-130
• /
• 1996

The theory and numerical technique using boundary elements method (BEM) are given to solve 2-dimensional resistivity problems. Potential distributions from homogeneous resistivity model and layered model are calculated by using BEM for a point source of current injection. The potential distributions of BEM are compared with those of finite difference method (FDM) and finite elements method (FEM). Among the three numerical methods to solve 2-dimensional resistivity problem, it is proved that BEM is more efficient tool than FDM and FEM in consideration of computing storage and time as weU as the accuracy of solutions.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.3
• /
• pp.55-64
• /
• 2005

This study demonstrates the experiment based on digital photogrammetric processing for acquiring data related to slope monitoring. To apply dose-range digital photos for monitoring road rock slopes, digital elevation models and digital orthophotos were generated and 3D modelling was conducted for the visualization on a digital photogrammetric workstation. These digital photogrammetric products can be utilized as objective and scientific data not only for surveying and analyzing the shape and characteristics of the slopes but also for extracting various engineering data for building the database of the slopes and making the safety diagnosis of the slopes.

• Geophysics and Geophysical Exploration
• /
• v.5 no.3
• /
• pp.169-177
• /
• 2002

We develop the weighted-averaging finite-element method which uses four kinds of element sets. By constructing global stiffness and mass matrices for four kinds of element sets and then averaging them with weighting coefficients, we obtain a new global stiffness and mass matrix. With the optimal weighting coefficients minimizing grid dispersion and grid anisotropy, we can reduce the number of grid points required per wavelength to 4 for a $1\%$ upper limit of error. We confirm the accuracy of our weighted-averaging finite-element method through accuracy analyses for a homogeneous and a horizontal-layer model. By synthetic data example, we reconfirm that our method is more efficient for simulating a geological model than previous finite-element methods.