• Information and Communications Magazine
• /
• v.31 no.3
• /
• pp.39-45
• /
• 2014

본 고에서는 디지털 홀로그램의 생성 및 복원 방법에 관한 주요 이슈를 다룬다. 디지털 홀로그램 특히 컴퓨터 생성 홀로그램은 최근 디지털 디스플레이 및 고속 병렬 컴퓨팅 기술의 발달과 더불어 급속한 발전을 보이고 있다. 컴퓨터 생성 홀로그램은 메쉬, 점 집합 등으로 구성된 가상 객체의 표면에서 발생한 광파가 회절되는 분포를 수치 계산하여 생성된다. 이를 위하여 파동 방정식으로부터 유도되는 주요 회절식들을 살펴보고 이를 바탕으로 한 수치 계산 모델을 제시한다. 생성된 디지털 홀로그램을 광학 장치를 통한 재생 없이 수치적 복원을 통해 복원 결과를 확인하는 기법과 관련 이슈 또한 설명한다.

• Korean Journal of Optics and Photonics
• /
• v.8 no.2
• /
• pp.99-106
• /
• 1997

In this paper, we demonstrated, through experiment and numerical reconstruction, that the bias and the conjugate image, which are main drawbacks in incoherent holography, can be removed. By using wave plates of the modified triangular interferometer, which was made by adding simple passive devices to the conventional triangular interferometer, we adjusted the relative phase differences of two optical waves traveling in clockwise and counterclockwise. In this way, we obtained four intensity patterns, and then by manipulating the four intensity patterns electronically we obtained the complex hologram without bias and the conjugate image. Comparing numerical reconstruction results of the complex hologram with numerical reconstruction results of the hologram obtained from the conventional triangular interferometer, we demonstrated that bias and the conjugate image can be removed using the modified triangular interferometer.

• Composites Research
• /
• v.28 no.4
• /
• pp.204-211
• /
• 2015

This paper presents a theory related to a two-dimensional linear cross-sectional analysis, recovery relationship and a one-dimensional nonlinear beam analysis for composite wing structure with initial twist. Using VABS including a related theory, the design process of the composite rotor blade has been described. Cross-sectional analysis was performed at cutting point including all the details of geometry and material. Stiffness matrix and mass matrix were linked to each section to make 1D beam model. The 3D strain distributions within the structure were recovered based on the global behavior of the 1D beam analysis and visualize numerical results.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.73-75
• /
• 2018

최근의 하천복원 사업은 제외지 중심의 하천복원에서 벗어나 제내지의 격리 차단된 구하도까지 복원하고자 하는 노력이 시도되고 있다. 그러나 하천복원에 따른 수리적 및 생태적 연결성 향상이 적절히 수행되는지에 대한 정량적 평가 수단이 부족한 상태다. 본 연구에서는 구하도 복원에 따른 생태적 연결성 평가수단으로서 복원전 후 수리해석 결과를 이용하여 대상어종의 서식처적합도지수(HSI)와 식생의 공간분포를 분석 또는 예측할 수 있는 모형을 개발하였다. 공간분포된 수리특성을 위해서는 2 3차원의 모형이 필요하지만 복잡한 계산과정, 고도의 기술 및 많은 시간과 비용이 필요하다는 점에서 접근이 용이하지 않다. 이에 1차원 홍수추적모형의 결과를 이용하여 1차원 수리특성을 2차원으로 확장시키는 수치모형도 함께 개발하였다. 다만 개발된 각 모형의 단계별 실행 결과는 개별적인 요소의 평가로서 그 의미가 작으므로 하천복원의 종합적 평가를 위한 수리-물리서식처-식생의 통합적 모의가 필요하다 개발된 모형의 사용성 증대 및 생태적 연결성 평가 통합모형으로의 발전을 위해 개발된 모형을 하나의 연동시스템으로 구축하고자 하며, 연동 시스템을 이용하여 수리적 및 생태적 연결성을 신속하고 간단하게 해석할 수 있다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.1
• /
• pp.9-15
• /
• 1998

Numerical cadastral surveying method has advantages of higher accuracy and less individual error than planetable surveying method if we consider the result of surveying at the same area. Now in the areas where they use numerical cadastral records, coordinate is the basis when the boundary location is registered in numerical cadastral re-cords or is reconstructed on land surface, and this coordinate represents simply the absolute locational relationship with respect to origin point. But when we register the cadastral boundary location in cadastral or reconstruct it on land, relative relationship with respect to traverse point is more advisable basis than absolute relationship with respect to orgin point. This study contributes to the numerical cadastral surveying by discussing the problems to be improved that the principle of coordinate based boundary location registration and reconstruction has.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.193-197
• /
• 2003

우수한 문화유산을 보유하고 있는 우리나라는 그간 전쟁과 관리소홀로 인하여 많이 파괴되고 유실되는 피해를 입어왔다. 한번 손실된 문화재는 기존 자료 없이는 완전복구가 어려운 실정이며, 이러한 문화재의 복원을 위해 그 모습을 수치화시켜 영구 보전함으로써 그 활용가치를 높일 수 있다. 또한, 문화재의 복원 전·후의 모습을 체계적으로 정리하기 위해서 문화재의 3차원 구현을 통한 자료의 전산화 작업이 필요하다. 따라서, 본 연구에서는 수치사진측량용 카메라를 이용하여 봉분을 촬영하고, 이렇게 취득 데이터를 사용하여 3차원형상을 수치화 하여 복원 이전의 발굴상태를 영구히 보존함과 동시에 발굴된 유적을 기초로 하여 복원시킨 봉분의 형상을 추측하기는 자료로도 활용할 수 있다. 이러한 복원 작업을 효율적이고, 신속하게 분석하여 재현함으로써 문화재의 유지관리·복원을 위한 기초 자료기반을 구축함에 그 목적이 있다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.5
• /
• pp.405-411
• /
• 2016

This paper presented the theory related to a two dimensional linear cross-sectional analysis, recovery relationship and a one-dimensional nonlinear beam analysis for composite beam with initial twist and high aspect ratio. Using VABS including related theory, preceding research data of the composite wing structure has been modeled and compared. Cross-sectional analysis was performed and 1-D beam was modeled at cutting point including all the details of real geometry and material. The 3-D strain distribution and margin of safety at recovery point was calculated based on the global behavior of the 1-D beam analysis and visualize numerical results.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.1
• /
• pp.1-9
• /
• 2018

All ships should ensure stability in accordance with IMO regulations. However, GM is only used to determine ship stability because it takes a lot of time to validate all regulations. This is a problem given that the safety of vessels cannot be guaranteed, potentially leading to accidents. There is a need for a more intuitive and comprehensive method of confirming the stability of ships. This study developed a stability index that expresses ship stability in one value. An index equation is defined based on the 6 stability criteria for ships prescribed by IMO and the result of calculating the ship stability of a model ship. A stability index has been derived for each loading condition by applying the index equation to the same ship. It can clearly be seen that this stability index appropriately explains the criteria. In other words, it is possible to assess ship stability with one value and confirm whether the ship stability satisfies IMO regulations. This index will help masters and officers more easily and accurately check ship stability.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.6
• /
• pp.39-47
• /
• 2010

A research of image-based articulated pose estimation has some problems such as detection of human feature, precise pose estimation, and real-time performance. In particular, various methods are currently presented for recovering many joints of human body. We propose the novel numerical inverse kinematics improved with the UKF(unscented Kalman filter) in order to estimate the human pose in real-time. An existing numerical inverse kinematics is required many iterations for solving the optimal estimation and has some problems such as the singularity of jacobian matrix and a local minima. To solve these problems, we combine the UKF as a tool for optimal state estimation with the numerical inverse kinematics. Combining the solution of the numerical inverse kinematics with the sampling based UKF provides the stability and rapid convergence to optimal estimate. In order to estimate the human pose, we extract the interesting human body using both background subtraction and skin color detection algorithm. We localize its 3D position with the camera geometry. Next, through we use the UKF based numerical inverse kinematics, we generate the intermediate joints that are not detect from the images. Proposed method complements the defect of numerical inverse kinematics such as a computational complexity and an accuracy of estimation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.2
• /
• pp.23-28
• /
• 2004

In EIT, various image reconstruction algorithms have been used in order to compute the internal resistivity distribution of the unknown object with its electric potential data at the boundary. Mathematically the EIT image reconstruction algorithm is a nonlinear ill-posed inverse problem. In this paper, a SPSA approach is proposed for the solution of the EIT image reconstruction. Results of numerical experiments of EIT solved by the SPSA approach are presented and compared to that obtained by the modified Newton-Raphson(mNR) method.