• The Journal of the Convergence on Culture Technology
• /
• v.4 no.4
• /
• pp.11-20
• /
• 2018

The purpose of this study was to examine the effect of the application of cool dialysis on dialytic stability, feeling of fatigue, pruritus and dialysis adequacy in hemodialysis. Methods: The study design was nonequivalent control group pretest-posttest design. The subjects were 50 patients who were hospitalized to hemodialysis. The experimental group cool dialysis(n=25) and the control group received only the usual treatment (n=25). The collected data were analyzed using independent t-test to examine study hypothesis. Results: The level of dialytic stability (F=5.53, p=.023) and feeling of fatigue (F=4.01, p<.001) in the experimental group were significantly different from that of the control group. However, the level of pruritus(F=.74, p=.394) and dialysis adequacy(F=1.02, p=.327) in the experimental group were not different from that of the control group. Conclusion: The study findings confirm that cool dialysis as an effective intervention alleviating dialytic stability and feeling of fatigue.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.597-605
• /
• 2019

IPM bridge is an integral bridge that can be applied from span 30.0m up to 120.0m, the shape conditions of IPM bridge is also applicable to the rahmen bridge. In this study, to perform the structural analysis of Rahmen bridge and IPM Bridge, the researchers compared the distribution types such as load, moment, and displacement of those bridges. Structural analysis was carried out on four span models ranging from single span bridges to four spans of 120.0 m, based on span length of 30.0 m. Structural analysis was carried out on those bridge with span 30.0m up to 120.0m. The conclusions drawn from this study are as follows. 1) The bending moments were calculated to be large for the Rahmen bridge, and the horizontal displacements were estimated to be large for the IPM bridge. 2) Since the bending moments are derived by the span length rather than the extension of the bridge, the permissible bending moment for the span length should be considered in the design. 3) The pile bent of the IPM bridge did not exceed the plastic moment of the steel pipe pile at 120.0m span, but because the horizontal displacement in the shrinkage direction is close to 25mm, the design considerations are needed. 4) In the actual design, it is important to ensure stability against member forces, so review of the negative moment is most important.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.461-467
• /
• 2021

Among the defect factors that can occur when a wafer-level lens is molded using a thermosetting material, the mold sticking problem of a molded lens during the release process can damage the molded substrate and deform the substrate at the wafer level. An experiment was conducted to examine the factors affecting the demolding force in the lens forming process. The demolding force was examined according to the coating material of the molds. The mold was surface-treated with ITO and Ti, followed by plasma treatment in an O2 atmosphere. A DLC coating was then performed, and the curing and releasability were examined. A coating method for the pull-off experiment was selected based on the results. To measure the demolding force according to the curing process conditions, a method of curing at a constant pressure and a method of curing at a constant position were applied. As a result, the TiO2 surface treatment reduced the release force. When cured by controlling the location, curing shrinkage can reduce the adhesion energy of the interface during curing, resulting in better demolding.

• Journal of Industrial Convergence
• /
• v.19 no.4
• /
• pp.111-126
• /
• 2021

The purpose of this study was to investigate the effects of 12-week training on changes in physical fitness and cardiovascular factors for firefighters. For this purpose, 40 men in their 20s and 30s who agreed to participate voluntarily were recruited. They were divided into four groups: the firefighters' physical fitness test training group (hereinafter referred to as PT group), firefighters' physical fitness test and aerobic training group (hereinafter referred to as PT+AR group), firefighters' physical fitness test and both aerobic and anaerobic training group (hereinafter referred to as PT+CO group). Physical fitness factors (grip strength, back muscle strength, seated forward bend, standing long jump, sit-ups, 20-meter shuttle run), cardiovascular factors (total cholesterol, triglycerides, high-density lipoprotein cholesterol, low-density lipoprotein cholesterol, glucose, waist circumference, systolic blood pressure, diastolic blood pressure) and the relationship between Framingham Heart Risk Score and physical/cardiovascular factors were compared and analyzed, and the following conclusions were obtained. Aerobic training, anaerobic training, and combined training, including 12 weeks of firefighter physical examinations, all had positive effects on fitness and cardiovascular factors, which would be an appropriate way for firefighter examinees to improve physical strength and reduce the risk of cardiovascular disease.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.4
• /
• pp.403-408
• /
• 1987

The milled rice yield of the fertilized Zeolite in the sandy loam as 542 Kg/10a was increased by 11% compared with the check plat as a standard cultivation. Significant positive correlations of that were found between grain yield/plant and panicle/total weight ratio or average weight of panicle, while lower correlations between ratio of riqened grains and grain yield/ plant. But significant negative correlations were found between 1,000-grain weight of rough and 4th. 5th internode/culm length ratio. It was reavealed that there were higher direct effects for ratio of ripened grains and spikelets/panicle affecting grain yield/plant through path analysis among the yield components. Moreover, organic dry matter production at 35 days after heading were heavier by 26% in active leaves, 19% in stem + leaf sheath, and 5% in panicle, respectively. Ratio of settled spikelets on the terminal of primary rachis-branch was 47% to total spikelets, and 37% in half-upper of that, moreover many spikelets settled on the terminal of rachis. Therefore, it was recognized that there were a dominant effect of apical glumous flower by fertilized Zeolite.

• Composites Research
• /
• v.36 no.4
• /
• pp.246-252
• /
• 2023

A secondary barrier made of glass fiber reinforced composites has been installed infinitely using automatic bonding machine(ABM) in membrane type LNG cargo containment system (CCS). At the same time, significant thermal stress due to cryogenic heat shrinkage has occurred in the composite on the non-bonding area between the adhesive fixation at both ends. There have been studies from the perspective of structural safety evaluation taking this into account, but none that have analyzed mechanical property taking an prolonged length into account. In this study, 2-parameter Weibull distribution statistical analysis was used to standardize reliable mechanical property for actual length, taking into account the composite's brittle fracture of ceramic material with wide fracture strength dispersion. Related experimental data were obtained by performing uniaxial tensile tests at specific temperatures below cryogenic condition considering LNG environment. As a result, the mechanical strength increased about 1.5 times compared to -20℃ at -70℃ and initial non-linear behavior of fiber stretched was suppressed. As the temperature decreased until the cryogenic, the mechanical strength continued to increase due to cold brittleness. The suggested mechanical property in this study would be employed to secure reliable analysis support material property when assessing the safety of secondary barrier's structures.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3D
• /
• pp.499-509
• /
• 2006

Precast concrete deck has many advantages comparing with the in-situ concrete deck, and has been successfully applied to replacement of the deteriorated decks and to the newly constructed highway bridges in domestic region. In order to apply the precast decks into the railway bridges, however, differences of the load characteristics between the highway and the railway should be properly taken into account including the train load, longitudinal force of the continuous welded rail, acceleration or braking force, temperature change and shrinkage. Proper level of the longitudinal prestress of the tendons that can ensure integrity of the transverse joints in the deck system is of a primary importance. To this aim, the longitudinal tensile stresses induced by the design loads are derived using three-dimensional finite element analyses for the frequently adopted PSC composite girder railway bridge. The effect of the temperature change is also investigated considering the design codes and theoretical equations in an in-depth manner. The estimated proper prestress level to counteract those tensile stresses is above 2.4 MPa, which is similar to the case of the highway bridges.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.3
• /
• pp.244-250
• /
• 2023

In this paper, mortar mixed with tapioca starch was manufactured to evaluate the effect of tapioca starch on mortar, through evaluating the quality characteristics of mortar, the impact of tapioca starch on improving the performance and basic quality of mortar was examined. Tapioca starch tended to decrease flow by increasing the viscosity of the dough consistency of fresh mortar, which tended to reduce flow, and decreased by about 10 % as the tapioca starch mixing ratio increased by 0.025 %. In addition, the effect of tapioca starch on the compressive strength of mortar was at the same level regardless of the tapioca starch mixture at 28 days of age. However, at an early age of 3 days, the speed of compressive strength development was accelerated by mix ing tapioca starch. In addition, the effect of tapioca starch on the compressive strength of mortar was at the same level regardless of the tapioca starch mixture at 28 days of age. However, at an early age of 3 days, the speed of compressive strength development was accelerated by mixing tapioca starch. The speed of strength development improved by about 20 % when mixing 0.050 % tapioca starch. The adhesion strength improved by about 60 % when mixing 0.050 % tapioca starch, and the final shrinkage in length change decreased by 5 %.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.2
• /
• pp.243-252
• /
• 2024

Among the Foley sound generation models that have recently begun to be studied, a sound generation technique using the Vector Quantized-Variational AutoEncoder (VQ-VAE) structure and generation model such as Pixelsnail are one of the important research subjects. On the other hand, in the field of deep learning-based acoustic signal compression, residual vector quantization technology is reported to be more suitable than the conventional VQ-VAE structure. Therefore, in this paper, we aim to study whether residual vector quantization technology can be effectively applied to the Foley sound generation. In order to tackle the problem, this paper applies the residual vector quantization technique to the conventional VQ-VAE-based Foley sound generation model, and in particular, derives a model that is compatible with the existing models such as Pixelsnail and does not increase computational resource consumption. In order to evaluate the model, an experiment was conducted using DCASE2023 Task7 data. The results show that the proposed model enhances about 0.3 of the Fréchet audio distance. Unfortunately, the performance enhancement was limited, which is believed to be due to the decrease in the resolution of time-frequency domains in order to do not increase consumption of the computational resources.

• The Korean Journal of Nuclear Medicine
• /
• v.34 no.1
• /
• pp.30-38
• /
• 2000

Purpose: We investigated the role of myocardial perfusion SPECT in prediction of ventricular dilatation and the role of revascularization including thrombolytic therapy and PTCA in prevention of ventricular dilatation after an acute myocardial infarction (AMI). Materials and Methods: We performed dipyridamole stress, 4 hour redistribution, and 24 hour reinjection Tl-201 SPECT in 16 patients with AMI two to nine days after attack. Perfusion and wall motion abnormalities were quantified by perfusion index (PI) and wall motion index (WMI). Left ventricular ejection fraction (LVEF), WMI and ventricular volume were measured within 1 week of AMI and after average of 6 months. According to serial changes of left ventricular end-diastolic volume (LVEDV), patients were divided into two groups. We compared WMI, PI and LVEF between the two groups. Relationships among degree of volume, stress-rest PI, WMI, CKMB, Q wave, LVEF and revascularization were analysed using multivariate analysis. Results: Only initial rest perfusion index was significantly different between the two groups (p<0.05). While initial LVEF, stress PI, CKMB, trial of revascularization procedure, presence of Q wave and WMI were not significantly different between the two groups. Eight of 16 patients (50%) showed LV dilatation on follow-up echocardiography. Three of 3 patients (100%) who did not undergo revascualrization procedure documented LV dilatation. And only 5 (38%) of the remaining 13 patients who underwent revascularization revealed LV dilatation. There was no difference in infarct location between the two groups. By multivariate linear regression analysis in patients only undergoing revascularization, rest perfusion index was the only significant factor. Conclusion: Myocardial perfusion SPECT performed prior to revascularization was useful in prediction of LV dilatation after an AMI. Rest perfusion index on myocardial perfusion plays as a significant predictor of left ventricular dilatation after AMI. And revascularization appears to be a valuable procedure in alleviating LV dilatation after AMI with or without viable myocardium in a limited number of patients studied retrospectively.