Abstract
Precast concrete deck has many advantages comparing with the in-situ concrete deck, and has been successfully applied to replacement of the deteriorated decks and to the newly constructed highway bridges in domestic region. In order to apply the precast decks into the railway bridges, however, differences of the load characteristics between the highway and the railway should be properly taken into account including the train load, longitudinal force of the continuous welded rail, acceleration or braking force, temperature change and shrinkage. Proper level of the longitudinal prestress of the tendons that can ensure integrity of the transverse joints in the deck system is of a primary importance. To this aim, the longitudinal tensile stresses induced by the design loads are derived using three-dimensional finite element analyses for the frequently adopted PSC composite girder railway bridge. The effect of the temperature change is also investigated considering the design codes and theoretical equations in an in-depth manner. The estimated proper prestress level to counteract those tensile stresses is above 2.4 MPa, which is similar to the case of the highway bridges.
프리캐스트 콘크리트 바닥판은 일반적인 현장타설 바닥판과 비교할 때 많은 장점을 가지고 있으며, 최근 국내에서도 도로교의 노후 바닥판 교체 공사 및 신설 도로교에 성공적으로 적용되고 있다. 하지만, 철도교에 프리캐스트 바닥판을 적용하기 위해서는 활하중, 장대레일 종하중, 시제동하중, 온도변화, 건조수축 등 도로교와 철도교의 하중 특성의 차이를 적절히 반영한 설계가 요구되며, 특히 횡방향 이음부의 연속성을 확보하여 일체화시키기 위해 바닥판 내부에 배치한 종방향 텐던의 적정한 프리스트레스 수준을 평가하는 연구가 요망된다. 따라서 본 연구에서는 철도교에 빈번히 적용되는 PSC 합성거더 철도교에 대하여 정밀한 3차원 유한요소해석을 통해 주요 설계하중이 유발하는 바닥판의 종방향 응력을 산정하였다. 그 결과 종방향 인장응력을 유발하는 지배적인 요인은 활하중보다는 바닥판의 온도 저하나 시동하중으로 나타났으며, 특히 온도의 영향은 설계기준상의 제안식 또는 이론식과도 비교해 가며 중점적으로 분석하였다. 종방향 인장응력을 상쇄하여 올바른 구조거동을 유도하기 위한 프리스트레스의 범위를 고찰한 결과, 대상 철도교에 대해 2.4 MPa 이상의 프리스트레스를 도입하는 것이 적정한 것으로 나타났으며 이는 도로교의 경우와 유사한 수준으로 평가되었다.