• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.10a
• /
• pp.181-186
• /
• 1994

본 연구에서는 수직펌프 구조물의 동적특성을 규명하기 위해 역학적인 해석과 유한요소법의 상용코드인 ANSYS를 이용하여 수치해석한 결과를 현장실험을 통한 분석 결과와 비교 검토하였다. 구조물 진동의 해석은 현재 가동중인 화력발전소의 수직 순환수 펌프(해수 순환수 펌프)를 대상으로 하였으며 고유진동수의 예측 및 실체 측정을 하였다. 수직순화수 펌프의 고유진동수 측정은 정지된 상태에서 충격가진 방법 및 전기자석식 가진기를 이용 실시되었으며 임시로 별도 설치된 펌프구조물의 지지봉에 대한 진동 영향평가도 하였다.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2011.06a
• /
• pp.212-212
• /
• 2011

이 논문은 선박의 자세 안정성 유지를 위한 anti-heeling system 용 양방향 펌프에 대하여 연구하였다. 기존 양방향펌프의 기술은 모터 외장용 수직방식의 양방향 펌프를 사용해왔다. 현재는 모터내장용 양방향 펌프가 개발되고 있다. 수직방식의 양방향 펌프와 모터 내장용 양방향 펌프를 유동해석을 통하여 성능을 비교하고 앞으로 개선되어야 할 문제점에 대하여 연구하였다.

• Journal of KSNVE
• /
• v.9 no.5
• /
• pp.928-935
• /
• 1999

Vertical pumps are widely used owing to the fact that they occupy small floor space. In this type of pumps, however, the vibrational problems are very important, since, in many cases, they have less stiffness in comparison with lateral pumps. This study presents a simple solution method for calculating the natural frequencies and modes of vertical pumps. In this study, a mode of a vertical pump was developed and the nondimensional parameters for the vibrational characteristics of it were determined. Added mass was calculated for the effects of water and the transfer matrix method was used.

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.216-220
• /
• 2001

Flow analysis was carried out for two vertical pumps. The geometrical difference of two pumps is the adoption of vaned diffuser. Full pump models were used to simulate the velocity fields of the pumps. Pump head and velocity field were compared to obtain the features of diffuser flow. It was shown that the discontinuity of head curve was predicted and reverse flow could be generated at impeller exit even in the rated flow condition.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.11
• /
• pp.909-915
• /
• 2009

In this paper, a study of performance improvement for a centrifugal vertical pump having specific speed of 330 is introduced. The existing model has high efficiency but needs better NPSH required performance. Such that new pump model is designed to obtain larger suction specific speed. 6 design parameters considered to affect pump performance are selected for impeller design. Key design parameters are investigated using by design of experiments and CFD, and impeller inlet diameter is increased to get better suction performance. The amount of inlet diameter increase is determined by using cavitation analysis. The results show that new design model has higher efficiency and better NPSH required performance than the existing model.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.885-890
• /
• 1998

SMART 냉각재순환펌프는 수직형 축류펌프로 분류되며 작동되는 환경의 특성상 캔드모터 펌프로 설계하였다. 냉각재순환점프의 전체 구조에 대한 개념설계를 수행하였으며 펌프의 주요부품인 회전측 집합체, 베어링 집합체, 전동기를 설계하였다. 베어링의 구조와 형상설계를 수행하였고 전동기는 농형유도 전동기로 설계하였으며 회전자의 슬롯에 대한 상세설계와 고정자의 슬롯에 대한 상세설계를 수행하였다. 앞으로 회전축의 동특성 해석, 임펠러의 캐비테이션 시험, 베어링의 내구성 시험, 펌프몸체의 응력해석을 수행할 예정이다.

• The KSFM Journal of Fluid Machinery
• /
• v.15 no.1
• /
• pp.13-20
• /
• 2012

A vertical-axis multistage pump with low specific speed was developed, satisfying performance requirements such as flow rate, total head, and NPSH. The developed pump was designed through conceptual design, configuration design, and performance analysis by CFD which were established in KIMM. The prototype pump's mechanical wholesomeness besides hydraulic performances were verified by running test, performance test, and reliability test.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.779-781
• /
• 2005

In this paper, Firstly, it is shown that the bending mode vibration source of vertical pump system is comparatively large because resonance. Secondly in order to reduce the bending mode vibration of vertical pump, The improvement of some boundary condition have been developed and its effectiveness is investigated as appling it at the vertical pump system pratically.

• Plant Journal
• /
• v.9 no.1
• /
• pp.43-49
• /
• 2013

In this study, the natural frequency of the actual operating vertical pump in the P combined cycle power plant is measured and the cause of high vibration is determined by using fluid-structure coupled vibration theory. Choosing the vibration reduction plan suited for field conditions and using the numerical analysis verify effectiveness of the plan. The plan is applied to the actual pump and the empirical experiments are conducted.

• Journal of the KSME
• /
• v.31 no.7
• /
• pp.644-651
• /
• 1991