• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.4
• /
• pp.315-322
• /
• 2013

Purpose: To evaluate the axial displacement of implant-abutment assembly after cyclic loading in internal tapered connection system. Materials and methods: External butt-joint connection implant and internal tapered connection implant were connected with three types of abutment for cement-retained prostheses, i.e. external type abutment (Ext group), internal tapered 1-piece abutment (Int-1 group), and internal tapered 2-piece abutment (Int-2 group). For each group, 7 implants and abutments were used. The implantabutments assemblies were clamped into the implant holder for vertical loads. A dynamic cyclic loading was applied for $150{\pm}10N$ at a frequency of 4 Hz. The amount of axial displacement of the abutment into the implant was calculated at each cycle of 0, 5, 10, 50, 100, 1,000, 5,000, and 10,000. A repeated measures analysis of variance (ANOVA) for the overall effect of cyclic loading and the pattern analysis by linear mixed model were used for statistical analysis. Differences at P<.05 were considered statistically significant. Results: The mean axial displacement after 10,000 cycles were $0.714{\pm}0.488{\mu}m$ in Ext group, $5.286{\pm}1.604{\mu}m$ in Int-1 group, and $11.429{\pm}1.902{\mu}m$ in Int-2 group. In the pattern analysis, Int-1 and Int-2 group showed continuous axial displacement at 10,000 cycles. There was no declining pattern of axial displacement in the Ext group. Conclusion: The pattern of linear mixed model in Ext group showed no axial displacement. There were continuous axial displacements in abutment-implant assemblies in the Int-1 and Int-2 group at 10,000 cycles. More axial displacement was found in Int-2 group than in Int-1 group.

• KDI Journal of Economic Policy
• /
• v.18 no.2
• /
• pp.63-116
• /
• 1996

우리나라 제조업(製造業)의 수직적(垂直的) 구조(構造)는 선진공업국에 비하여 소(小) 영세기업(零細企業)의 비중이 월등히 높은 피라미드형의 형태를 보이며 80년대말 이후 소기업군의 확대는 더욱 두드러지고 있다. 이처럼 소기업의 비중이 높아진 것은 제조업체들이 가격경쟁력(價格競爭力)을 높이기 위하여 생산비용이 높게 드는 자체생산(自體生産)을 가능한 한 줄이고 임금(賃金)이 낮은 중소기업으로 생산공정을 이양해 왔기 때문이다. 소기업 비중이 높은 분업구조는 가격경쟁력이 중시되어 생산을 분업화해야 하는 경제체제에서는 높은 효율성(效率性)을 발휘한다고 평가할 수 있다. 90년대에 이르러 중소기업이 저가(低價)의 생산요소(生産要素)를 조달받기 어려운 경제여건이 조성되면서 중소기업의 경영불안이 높아지는 등 가격경쟁력을 유지하기 위한 생산분업체제(生産分業體制)는 한계(限界)에 도달한 것으로 보인다. 따라서 대기업과 중소기업간 분업도 기술(技術) 중심의 분업관계(分業關係)로 전환되어야 할 단계에 이르렀다고 볼 수 있다. 그러나 종전과 같이 소기업(小企業)에 의존하는 분업구조(分業構造)로는 기술분업(技術分業)이 정착되기 어렵다. 왜냐하면 연구개발, 전문인력의 고용 등 기술개발과 관련된 기업활동에는 생산량에 관계없이 고정비용(固定費用)이 들어서 기술개발 비용과 위험을 분산시키려면 기업의 생산규모가 상당히 커져야 하기 때문이다. 이는 소기업 중심의 분업구조가 중견기업(中堅企業)중심의 구조로 개편(改編)되어야 함을 의미한다. 중견기업이 육성되려면 첫째, 대기업과 직거래하는 중소업체(中小業體)의 수(數)가 축소되어야 한다. 거래업체수의 과다는 기업규모를 영세하게 만드는 가장 직접적 요인이기 때문이다. 그러나 거래업체의 정리과정에서 기존업체들이 중소기업 보호여론을 등에 업고 반발할 수 있고, 대기업이 교섭력을 강화하기 위한 수단으로 악용할 수 있으므로 객관적이고 투명한 정리기준의 제시가 전제되어야 한다. 둘째, 대기업의 중소기업에 대한 대폭적 자본참여(資本參與)가 허용되어야 한다. 대기업의 자본참여는 중소기업 지배를 강화할 것으로 우려되어 현재는 극히 부분적으로 허용하고 있으나, 개방경제하에서는 대기업과 국내 중소기업간의 협력관계를 유지시키는 효과적 수단으로 작용하게 될 것이다. 셋째, 은행 등 금융자본(金融資本)의 중견기업에 대한 투자(投資) 활성화(活性化)가 필요하다. 금융자율화로 금융기관의 수익성이 강조되는 상태에서 금융자본이 거래업체의 주주(株主)로서 참여하면 경영정보를 손쉽게 파악할 수 있어 우량업체의 신속한 육성이 가능해질 수 있다.

• The Journal of the Korea Contents Association
• /
• v.12 no.6
• /
• pp.201-210
• /
• 2012

This study examines the structure of taste repertoires for cultural arts. The major results are as follows: firstly, the numbers of taste repertoires were 1.66 for type 1 and 4.27 for type 2. More specifically, respondents tended to have movie taste. Secondly, there were socio-demographic differences for taste repertoires for cultural arts. In other words. female respondents to have more taste repertoires than that of male respondents. Also, younger respondents to have more taste repertoires than that of older respondent. Thirdly, blog users tended to have more taste repertoires than that of non-users. It can be argued that blog use may be a determinant of the number of taste repertoires for cultural arts. In addition, although the number of taste repertoires type 1 was determined by tastes for theatre, movie, popular music, musical and photo, the number of taste repertoires type 2 was determined by tastes for theatre, movie, musical and classic contents.

• Economic and Environmental Geology
• /
• v.53 no.2
• /
• pp.167-181
• /
• 2020

Analysis of variance (ANOVA) and multiple comparison analysis were performed for shear strengths categorized by breccia content of 5 wt.% (Case-I), 10 wt.%, (Case-II) and 15 wt.% (Case-III) in fault cores. The relationship between breccia contetnt and shear strength was quantitatively classified by calculating the mean and standard deviation of shear strength for each population in each case and then the grouping the breccia contents that had a statistically similar effect on the dispersion of shear strength. As a result, shear strength was clearly classified into group 1 (breccia content of 0-15 wt.%) and group 2 and 3 (breccia coantent of 15-30 wt.% and 30 wt.% or more) in Case-III. Shear strength of the standard line at breccia content of 15 wt.% were determined to be 43.6 kPa, 77.6 kPa, and 118.6 kPa at each normal stress (54 kPa, 108 kPa, and 162 kPa), respectively. In addition, the distribution range of cohesions is 0-43.6 kPa at breccia content of 15 wt.% or less, and 0-70.0 kPa at 15 wt.% or more. Distribution range of friction angles is 0-45.7 ° at breccia content of 15 wt.% or less, and 16.7-57.5 ° at 15 wt.% or more.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.4
• /
• pp.325-332
• /
• 2022

Determination of VLBI IVP (Very Long Baseline Interferometry Invariant Point) position with high accuracy is required to compute local tie vectors between the space geodetic techniques. In general, reflective targets are attached on VLBI antenna and slant distances, horizontal and vertical angles are measured from the pillars. Then, adjustment computation is performed by using the mathematical model which connects measurements and unknown parameters. This indicates that the accuracy of the estimated solutions is affected by the accuracy of the measurements. One of issues in local tie surveying, however, is that the reflective targets are not in favorable condition, that is, the reflective sheet target cannot be perfectly aligned to the instrument perpendicularly. Deviation from the line of sight of an instrument may cause different type of measurement errors. This inherent limitation may lead to incorrect stochastic modeling for the measurements in adjustment computation procedures. In this study, error characteristics by measurement types and pillars are analyzed, respectively. The analysis on the studentized residuals is performed after adjustment computation. The normality of the residuals is tested and then equal variance test between the measurement types are performed. The results show that there are differences in variance according to the measurement types. Differences in variance between distances and angle measurements are observed when F-test is performed for the measurements from each pillar. Therefore, more detailed stochastic modeling is required for optimal solutions, especially in local tie survey.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.622-625
• /
• 2005

본 연구의 목적은 동해 울릉분지 천부퇴적층의 공극수와 메탄의 특징 및 상호작용을 규명하는데 있다. 울릉분지에서 채취한 코어에서 공극수를 추출하여 분석한 결과, 공극수의 황산염 농도가 퇴적물의 심도가 증가할수록 감소하며, 감소하는 경향은 크게 세 가지 (직선성, concave down, upward kink)로 나뉨을 알 수 있었다. 이는 모든 코어에서 황산염 환원작용이 일어나고 있음을 지시한다 황산염 농도의 수직적 구배를 이용하여 SMI (sulfate-methane interface) 심도를 계산하면, 남부울릉분지가 북부울릉분지보다 낮은 값을 갖는다. 반면에 메탄 농도는 퇴적물의 심도가 증가할수록 전반적으로 증가하며, 공간적으로는 남부 울릉분지가 북부울릉보지보다 높다. 또한 남부울릉분지에서 메탄가스 농도는 SMI 심도 아래에서 급격히 증가한다 메탄가스의 탄소 안정동위원소$(\delta^{13}C)$ 분석 값들은 대부분 $-60\%_{\circ}$이하로서 이는 메탄가스가 열기원 보다는 박테리아기원임을 지시해준다 또한 남부 울릉분지에서 메탄의 탄소 안정동위원소 분석 값들은 메탄농도가 증가할수록 낮은 값을 보여 주는 데 이러한 결과들은 남부 울릉분지에서 무산소 메탄 산화작용이 일어나고 있음을 지시하고, 메탄의 상향 분산 (diffusion)량이 북부 울릉분지보다 많이 일어난다는 것을 의미한다. 공극수내 황산염 이온 농도 구배와 메탄가스 농도를 종합적으로 고려할 때, 울릉분지에서 가스하이드레이트의 부존가능성은 북부 울룽분지보다 남부 울릉분지가 높은 것으로 추정된다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.30 no.4
• /
• pp.611-621
• /
• 1992

The Present study was performed to evaluate the stress distribution patterns of bone tissues around two Branemark implant fixtures with varying lengths. Six models were used with the combination of 10mm, 7mm, 5mm Branemark implant fixture analogs. The load distribution characteristics of surrounding bone tissues were observed under 64kg vertical static loading on central part of fixed bridge using 2 dimensional photoelastic technique. Through observing the pattern of stress distribution around the implant fixtures, I got the results as follow : 1. Stress distribution pattern of model I(10mm, 10mm) was best among those of six models. 2. When two fixtures were in equal length, stress was increased in proportion to the reduction of implant surface area. 3. When two fixtures were in unequal length, stress was concentrated on the neck portion of the shorter one.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.4
• /
• pp.266-274
• /
• 1999

Vertical CTDT measurement at one point near tidewater glacier of fjord-head in Marian Cove, a tributary embayment of Maxwell Bay, South Shetland Islands was performed for 24 hours during the austral summer (January 21-22, 1998) to present water-column properties and SPM (suspended particulate matter) dispersal pattern in subpolar glaciomarine setting. Marian Cove shows three distinct water layers: 1) cold, freshened, and highly turbid surface plume in the upper 2 m, 2) warm, saline, and relatively clean Maxwell Bay water between 15-35 m in water depth, and 3) cold and turbid mid plume between 40-65 m in water depth. The surface plume is composed of silt-sized clastie particles mixed with flocculated biogenic detritus, and appears to originate from either supraglacial discharge by meltwater streams along the coast or water fall of ice cliff. Freshened and turbid mid plume consists exclusively of silt-sized clastic particles, resulting from subglacial discharge beneath the tidewater glacier. The disappearance of the two turbid plumes during the earlier period of measurement seems to be largely due to the breakup of the plumes by upwelling caused by strong easterly wind (> 8 m $sec^{-1}$). Thus, wind coupling over tidal effects regionally plays a major role in dispersal pattern of SPM as well as water exchange in Marian Cove.

• The Journal of Korean Academy of Prosthodontics
• /
• v.32 no.1
• /
• pp.120-147
• /
• 1994

This study was performed for the purpose of evaluating the stress distribution around threaded type implants, cylindrical type implants and teeth connected with rigid or non-rigid connector. The stress distribution around the surrounding bone was analyzed by three-dimensional photoelastic method. Twelve mandibular photoelastic epoxy resin models and a circular polariscope were used to record the isochromatic fringes. After the stress distribution around the implant and tooth was observed, the results were as follows ; 1. In threaded type implants, stress concentrated patterns were observed at the neck either vertical or 25 degree lateral force. 2. The stress concentrated patterns were observed at the tooth apical portion and neck portions of the implant and tooth when a threaded implant was connected with the tooth by either a rigid or non-rigid connector. More force was generated at the tooth neck portion by a rigid connector and more force at the implant neck portion by a non-rigid connector. 3. The stress concentrated patterns were observed at the apical portion of the implant and tooth when a cylindrical type ,implant was connected with the tooth either by a rigid or non-rigid connector. More force was generated at the tooth apical portion by a rigid connector and more force at the neck portion of the tooth and implant by a non-rigid connector. 4. The stress around the tooth was more equally distributed in a threaded type implant than in a cylindrical implant when the tooth was connected with either a rigid or non-rigid connector. 5. The stress around a threaded type implant was progressively more equally distributed in the following order : 1) when used a single implant, 2) a non-rigid connection with the implant and tooth, 3) a rigid connection with the implant and tooth, 4) a rigid connection with two implant fixtures.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.561-567
• /
• 2018

This study was carried out to improve the ride quality of high-speed electric multiple unit. Through dynamic analysis of the HEMU-430X, the range of the equivalent conicity with a critical speed of 300 km/h was between 0.05 and 0.25. The initial adopted wheel profile of HEMU-430X was S1002. The equivalent conicity of S1002 with the mileage of more than 40,000 km was about 0.033 and it was confirmed that XP55 is more suitable for stable operation because XP55 has the equivalent conicity of over 0.061. In order to improve ride quality of high-speed electric multiple unit, the change of installation angle of the yaw damper was suggested from $7.35^{\circ}$ to $0^{\circ}$. From sensitivity analysis and optimization, the air spring lateral and vertical stiffness was suggested to be reduced by 30% and the secondary vertical and lateral damper damping coefficient was increased by 50%. By applying this, it was expected that the car body acceleration could be improved by about 20% on average. The HEMU-430X's yaw damper installation angle was changed to $0^{\circ}$ and the damping coefficient of the lateral damper was increased by 30%. When the test run was carried out at the speed of 300 km/h on the Kyungbu high-speed line, the vehicle lateral acceleration had improved by 34.3%. The effect of additional improvement measures proposed in this paper will be tested in the on track test. The riding quality improvement process used in this study can be used to solve ride quality problems that can occur in commercial operation of high-speed electric multiple unit in the future.