• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.6
• /
• pp.363-368
• /
• 2017

The tsunami flood the coastal cities and damage the land structures. The study on wave pressure and force on land structures is one of the important factors in designing the stability of inland structures. In this study, two - dimensional wave flume tests on the horizontal wave force and pressure of tsunamis on a simplified box-type structure was conducted. Vertical distribution and wave power of horizontal wave pressure over time were measured by pressure sensors and force transducer. Also, those were measured from the different wave breaking types. The vertical distribution of horizontal wave pressure was uniform at the moment when the horizontal wave force to the structure was maximum under the breaking wave condition. A surf similarity parameter was employed in order to figure out the relationship between the maximum horizontal wave force on the structure as a function of various incident wave conditions. As a result, the non - dimensionalized horizontal wave force tends to decrease exponentially as the surf similarity parameter increases.

• Journal of the Korean Vacuum Society
• /
• v.20 no.5
• /
• pp.381-386
• /
• 2011

We fabricated the ZnO (zinc oxide)/$SiO_2$ (silicon dioxide) branch hierarchical nanostructures by the e-beam evaporation of $SiO_2$ onto the surface of the electrochemically grown ZnO nanorods on Si substrate, which leads to the self-assembled $SiO_2$ nanorods by oblique angle deposition between vapor flux and vertically aligned ZnO nanorods. In order to investigate the effects of $SiO_2$ deposition on the morphology and optical property of ZnO/$SiO_2$ branch hierarchical nanostructures, the evaporation time of $SiO_2$ was varied under a fixed deposition rate of 0.5 nm/s. The vertically aligned ZnO nanorods on Si substrate exhibited a low reflectance of <10% in the wavelength range of 300~535 nm. For ZnO/$SiO_2$ branch hierarchical nanostructures at 100 s of evaporation time of $SiO_2$, the more improved antireflective property was achieved. From these results, ZnO/$SiO_2$ branch hierarchical nanostructures are very promising for optoelectronic and photovoltaic device applications.

• Korean Journal of Optics and Photonics
• /
• v.19 no.2
• /
• pp.150-158
• /
• 2008

The exact transmission coefficients at the interface between a uniaxial anisotropic medium and an isotropic medium at? oblique incidence are derived by applying the extended Jones matrix method. When the birefringence of the uniaxial anisotropic medium is small ($|n_e-n_o|\;{\ll}\;n_o,\;n_e$), the exact transmission coefficients are compared with those by the conventional extended Jones matrix method by Yeh et al. They showed an excellent agreement with each other. In addition, using the exact transmission coefficients, we calculated the polarization characteristics of a light through a uniaxial medium to an incident light with arbitrary polarization state at? oblique incidence. We compared the transmittances of an unpolarized light through a pair of crossed o-type polarizers by two different methods and calculated the transmittance as the variation of the optical constants of the polarizers to evaluate of the extinction ratio. The polarization analysis method using the exact transmission coefficients can be applied to polarization characteristics of a light through a uniaxial medium with large birefringence as well as to liquid crystals and to optical anisotropic material.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.6
• /
• pp.275-286
• /
• 2021

In this study, the analytical solution for diffraction near a vertical detached breakwater was suggested by superposing the solutions of diffraction near a semi-infinite breakwater suggested previously using linear wave theory. The solutions of wave forces acting on front, lee and composed wave forces on both side were also derived. Relative wave amplitude changed periodically in space owing to the interactions between diffracting waves and standing waves on front side and the interactions between diffracting waves from both tips of a detached breakwater on lee side. The wave forces on a vertical detached breakwater were investigated with monochromatic, uni-directional random and multi-directional random waves. The maximum composed wave force considering the forces on front and lee side reached maximum 1.6 times of wave forces which doesn't consider diffraction. This value is larger than the maximum composed wave force of semi-infinite breakwater considering diffraction, 1.34 times, which was suggested by Jung et al. (2021). The maximum composed wave forces were calculated in the order of monochromatic, uni-directional random and multi-directional random waves in terms of intensity. It was also found that the maximum wave force of obliquely incident waves was sometimes larger than that of normally incident waves. It can be known that the considerations of diffraction, the composed wave force on both front and lee side and incident wave angle are important from this study.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.18 no.4
• /
• pp.291-297
• /
• 2015

The wave spectrum was generated from wave data measured at the Chagwi-do site in Jeju, where a 10MW class floating wave-offshore wind hybrid power generation system will be installed. The latching control technology (Sheng et al.[2015]) was applied in order to improve the extracted power from WEC (Wave Energy Converter), which is heaving in corresponding irregular waves. The peak period as a representative value of irregular waves was used when we determined the latching duration. From the numerical results in the time-domain analysis, the latching control technology can significantly improve the extracted power about 50%.

• Journal of Advanced Navigation Technology
• /
• v.20 no.3
• /
• pp.218-225
• /
• 2016

Null steering and beam steering are known well as anti-jamming methods in GPS anti-jamming system. Null steering gets a noise attenuation effect for the direction of jamming and beam steering earns additional gain synthesis for the direction of satellite signals. According to the research in the article for signal processing, it expresses that the N array antenna is effective for N-1 number of jamming signal by math public interest, however, the two algorithms analysis is not unknown for the operating condition of the realistic vehicle. In this paper, we modeled anti-jamming system using 4 and 7 array antenna and showed the two algorithms performance (PM, LCMV) when considering the number of antenna array, jammers and vehicle position (horizontal, vertical). In result, we showed that the case of vertical position of the vehicle which has large tilt angle for the relative position of satellites and jammers, has about 10 dB gain more in comparison with one of vertical position in spite of same JSR condition.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.3
• /
• pp.223-228
• /
• 1987

An efficient method for the calculation of wave forces on a tension leg platform(TLP) is presented in this paper. It is based on the Morison's equation with two corrective terms. One is the reduction of the inertia forces on the vertical columns in order to include the wave diffraction effect particularly for small wave conditions. The other is the inclusion of the hydrodynamic forces acting at the bottoms of the columns. Numerical studies are carried out for a TLP in 1000 ft water with two different wave heading angles($0^{\circ}$ and $45^{\circ}$). The reponse amplitude operators(RAO's) for the TLP motions and top tether tension variations are obtained by the present method and the theoretically more accurate method based on the diffraction theory. A comparison has been made between the results obtained by two methods.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.37-37
• /
• 1999

KSTAR(Korea Superconducting Tokamak Advanced Research) 핵융합 토카막 실험 장치의 플라즈마 가열을 위한 수소 중성입자빔 수송라인 내에 설치되는 collimator에 가해지는 열속 및 플라즈마에 전달되는 빔의 통과율을 해석하였다. 43cm$\times$12cm 크기의 이온원으로부터 방출되는 이온빔의 공간적 분산은 기본적으로는 Gaussian 분산(수직바향으로 1.2$^{\circ}$, 수평방향으로 0.5$^{\circ}$)의 형태를 가지지만 이온 가속 전장의 공간적 불균일로 인해 Gaussian 분산에서 다소 벗어나는 형태를 띠게 되는데, 이의 영향을 고려할 수 있는 수학적 모델을 정립하였다. 해석에 고려된 요소들은 다음과 같다. 이온원을 수많은 점원의 집합으로 가정하여 각각의 점원으로부터 주어진 공간적 분산을 가지는 이온들이 방출되는 것으로 가정하였으며, 방출된 이온은 중성화 과정을 거쳐 40%의 이온만이 중성입자화되며, 중성화되지 않은 60%의 이온들은 bending magnet에서 ion dump로 유도되어 사라지며, 나머지 중성입자들은 직진 운동을 하게 된다. 빔 진행 도중 빔 중앙에서 크게 벗어나는 일부 중성입자들은 여러 겹으로 존재하는 빔 collimator에 의해 단계적으로 제거되며, 일부 중성입자들은 잔류 수소기체에 의한 재이온화 과정을 거치기도 한다. 여기서는 정립된 수학적 모델을 이용하여 이들 collimator에서 제거되는 양 및 재이온화 손실들을 고려하여 최종적으로 플라즈마에 입사되는 중성입자 빔을 계산하였다. 한편, 빔 수송라인 설치시에 발생할 수 있는 설치 오차를 이온원 설치시의 오차와 빔 collimator 설치상의 오차로 구분하여 이들의 의한 영향도 계산하였다. Gaussian 분산을 가정하였을 경우, 이온원에 가장 근접하여 설치되는 collimator에 가해지는 수직성분의 열속은 9.7kW/cm2로 계산되었다. 이 열속을 제어 가능한 수준으로 낮추기 위해서 collimator는 빔 라인과 거의 나란하게 설치될 것이다. 빔의 통과율은 약 33%로서 하나의 이온원에서 방출된 7.8MW 중 2.5 MW만이 플라즈마에 전달되는 것을 알 수 있었다. Non-Gaussian 분산의 경우, 최대 열속은 9.1kW/cm2로 다소 낮아졌으나, 빔통과율은 28%정도로 더욱 낮아졌다. 설치상의 오차에 의한 영향을 살펴보면, 이온원이 1$^{\circ}$ 정도 기울어지게 설치된다면 collimaor에 가해지는 최대 열속 및 빔통과율은 약 15kW/cm2, 16.6% 정도로 나타나 매우 심각한 결과를 초래함을 알 수 있었다. 이에 비해 collimator 설치상의 오차의 영향은 이보다 훨씬 작아 5mm 오차가 발생했을 경우에도 최대 열속은 12kW/cm2까지 증가했으나, 빔 통과율의 변화는 거의 없었다.

• Journal of Radiation Protection and Research
• /
• v.36 no.1
• /
• pp.44-51
• /
• 2011

Activation foil-based Bonner sphere spheres are used to obtain neutron energy spectra of nuclear power plants or accelerator-produced neutrons. The position and the foil mass dependence of response functions should be studied carefully before measurement of Bonner spheres. This study showed that the normal incidence to the foil surface made a large shift of responses while parallel and isotropic incidence made no position dependence. The correlation between foil mass and response was not linear. Therefore, the response functions of activation-foil based Bonner spheres should be calculated for every different foil mass and the direction of Bonner spheres for parallel incidence will be preferred for radioactive neutron source or accelerator target produced neutrons.

• Korean Journal of Materials Research
• /
• v.8 no.3
• /
• pp.195-199
• /
• 1998

Magnetic and Magneto-Optical properties of Co-based MnSbPt thin films prepared by R.F Sputtering were investigated. In this study, the optimum heat treatment condition was found to be $300^{\circ}C$-4hours under a $5\times10^{-6}$ Torr, but perpendicularly magnetized thin films could not be obtained. Coercive force showed maximum value of about 5000e at $250\AA$ Co thickness but the value is not enough for practical use of the thin film. Heat treated Co-based MnSbPt thin film shows 0.78 degree of Kerr rotation angle for 700nm of incident wavelength.