• Journal of Digital Convergence
• /
• v.13 no.12
• /
• pp.99-104
• /
• 2015

EUREKA is one of the most important international technological cooperations in politics for the EU. Until now, most research examined horizontal business relationships. This paper attempted to discover the factors of vertical business relationships throughout international technological cooperation, specifically EUREKA. The results of this paper found that the supplier in a vertical relationship business could have more power through EUREKA cooperation.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.2
• /
• pp.37-41
• /
• 2008

Purpose: The purpose of this case study is to prescribe a prismatic correction in uncommon case of cyclovertical heterophoria. Methods: The prescribed prism was used to balance the vertical vergence break values by the binocular vision evaluation such as phoria, vergence, accommodative function and the others. Results: Although asymptomatic lateral phoria was changed, the vertical prismatic correction improved the symptoms such as eyestrain, headaches, diplopia and others. And cyclophoria was disappeared by prismatic correction. Conclusions: The prismatic correction for this case was useful for alleviating symptoms of cyclovertical deviations.

• Journal of the Society of Disaster Information
• /
• v.8 no.2
• /
• pp.197-203
• /
• 2012

In these days, the design of a structure for reducing or eliminating noise and vibration is getting more important, as the social demands for reducing environmental pollution rise. In this paper, the basic concept and performance verification test results of the recently developed vertical vibration isolator are presented. The isolator attenuates vibration using the damping action from the friction plane made of PTFE and provides the restoring force from the polyurethane springs arranged in vertical and horizontal directions. The performance verification tests consist of a test for identifying performance change during load rate variation and a test for confirming the force-displacement relationship assumption in vibration force range.

• The korean journal of orthodontics
• /
• v.41 no.5
• /
• pp.337-345
• /
• 2011

Objective: The purpose of this study was to evaluate the effect of force and moment produced by Nickel-titanium wires of different sizes at activation and deactivation according to differing vertical bracket displacement. Methods: Superelastic NiTi wires of 3 different sizes (0.014", 0.016", and 0.016" ${\times}$ 0.022") were tied with elastomeric or 0.009-inch stainless steel ligations in a twin-bracket, 0.018-inch slot. A testing machine recorded the effects of simulated activation of 5 distances from 1 to 5 mm and deactivation of 5 distances from 4 to 0 mm, in increments of 1 mm. Results: Frictional force increased the wire stiffness during loading. Ligation of 0.014-inch NiTi wire with O-ring resulted in a significant increase in the stiffness. On application of orthodontic force for 5 mm of vertical displacement of teeth, the effective displacement in the case of the 0.014", 0.016", and 0.016" ${\times}$ 0.022" NiTi wires was 2 mm, 3 mm, and 4 mm, respectively. Conclusions: Our results showed that movement of teeth with large vertical displacement was ineffective because of excessive friction. This finding might contribute to the understanding of the force system required for effective teeth movement and thereby facilitate the application of the appropriate light wire for leveling and alignment.

• The korean journal of orthodontics
• /
• v.41 no.4
• /
• pp.268-279
• /
• 2011

Objective: The purpose of this study was to compare self-drilling orthodontic mini-implants of different surfaces, namely, machined (untreated), etched (acid-etched), RBM (treated with resorbable blasting media) and hybrid (RBM + machined), with respect to the following criteria: physical appearance of the surface, measurement of surface roughness, and insertion pattern. Methods: Self-drilling orthodontic mini-implants (Osstem implant, Seoul, Korea) with the abovementioned surfaces were obtained. Surface roughness was measured by using a scanning electron microscope and surface-roughness-testing machine, and torque patterns and vertical loadings were measured during continuous insertion of mini-implants into artificial bone (polyurethane foam) by using a torque tester of the driving-motor type (speed, 12 rpm). Results: The mini-implants with the RBM, hybrid, and acid-etched surfaces had slightly increased maximum insertion torque at the final stage ($p$ < 0.05). Implants with the RBM surface had the highest vertical load for insertion ($p$ < 0.05). Testing for surface roughness revealed that the implants with the RBM and hybrid surfaces had higher Ra values than the others ($p$ < 0.05). Scanning electron microscopy showed that the implants with the RBM surface had the roughest surface. Conclusions: Surface-treated, self-drilling orthodontic mini-implants may be clinically acceptable, if controlled appropriately.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.3
• /
• pp.29-46
• /
• 2014

For circular rigid footings with a rough base on sand, combined vertical - horizontal loading capacity was studied by three-dimensional numerical modelling. A numerical model was implemented to simulate the swipe loading and the probe loading methods and an interpretation procedure was devised in order to eliminate the numerical error from the restricted mesh density. Using the Mohr-Coulomb plasticity model, the effect of friction angle was studied under the associated flow-rule condition. The swipe loading method, which is efficient in that the interaction diagram can be drawn with smaller number of analyses, was confirmed to give similar results with the probe loading method, which follows closely the load-paths applied to real structures. For circular footings with a rough base, the interaction diagram for combined vertical (V) - horizontal (H) loading and the inclination factor were barely affected by the friction angle. It was found that the inclination factors for strip and rectangular footings are applicable to circular footings. For high H/V ratios, the results by numerical modelling of this study were smaller than the results of previous studies. Discussions are made on the factors affecting the numerical results and the areas for further researches.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.10a
• /
• pp.57-62
• /
• 2001

밀링은 회전공구를 사용하여 금속을 제거하는 효율적인 방법으로, 특히 수직밀링은 고능률절삭의 이점 때문에 널리 사용되는 금속절삭 가공방법중의 하나이다. 그러나 밀링커터는 단속절삭 공구로서 절삭 날의 단속절삭작용에 의한 변동절삭력과, 여러 날의 동시가공에 의한 절삭력의 교란 때문에 가공능률, 가공정밀도, 기계와 공구의 수명향상에 문제가 되어 왔다. 이러한 문제점들을 해결하기 위하여 기계설계자들은 절삭력의 교란에 의하여 일어나는 진동을 줄이기 위하여 기계구조의 강성을 증가시켰으나 이석은 고비용을 필요로 하게 되므로 공구 형상을 개선하여 안정된 절삭을 시도하였다.

• Journal of the korean Society of Automotive Engineers
• /
• v.10 no.5
• /
• pp.33-41
• /
• 1988

내연기관에서 crankshaft는 piston에 작용하는 수직 gas force 및 관성력을 회전력으로 바꾸어 주는 역할을 한다. 그러므로 engine작동중 높은 부하를 반복적으로 받기 때문에 이에 견딜 충분한 stiffness를 유지해야 한다. Engine의 stroke 운동시에 gas force와 관성력이 변하고 crankshaft의 형상이 복잡하므로 실제적으로 응력계산은 간단하지 않다. 여기에서는 crankshaft에 작용하는 하중과 반력을 계산하고 crankshaft의 stress 및 safety factor를 계산하여 crankshaft를 설계하는 방법을 설명하고자 한다. 근래 FEM에 의한 stress analysis를 많이 수행하나, loading condition을 주기 위해서는 classical method에 의해서 구할 수 있다.

• Proceedings of the Korean DIstribution Association Conference
• /
• 2007.11a
• /
• pp.95-108
• /
• 2007

본 연구는 수직적 유통거래 관계에서 거래의 불공정성을 발생시키는 선행요인과 결과요인에 관한 모형을 겁증하고자 하였다. 이를 위하여 기존 연구를 바탕으로 거래의 불공정성의 개념을 도입하고, 실증적으로 검증하여 향후 거래의 불공정성 연구에 응용될 수 있는 기반을 마련하고자 하였다. 또한 시장지배력이론과 거래비용이론을 적용시킴으로서 거래의 불공정성에 대한 보다 폭넓은 이해를 위해 노력하였다. 이러한 연구목적 달성을 위하여 문헌연구를 통해 가설을 도출하였으며, 국내 소비재 제조기업 표본 258를 대상으로 실증분석을 하였다. 제조업체의 브랜드 자산이 높을수록, 거래의 불공정성은 감소하는 것으로 나타났으며, 제조업체와 유통업체간의 상대적 의존성이 높을수록 거래의 불공정성은 증가할 것이라고 결과가 도출되었고, 마케팅협력정도가 높을수록 거래의 불공정성은 감소할 것이라고 나타났다. 거래의 불공정성이 증가할수록 관계지속기대감은 감소할 것이며, 거래의 불공정성이 증가할수록 신뢰는 감소할 것이라는 결과가 도출되었다. 연구결과를 기반으로 본 연구는 이론적 시사점, 실무적 시사점, 연구의 한계점 그리고 미래 연구방향에 대하여 논의하였다.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2558-2560
• /
• 2005

본 논문에서는 마찰력과 질량은 수직항력에 의해 관계하고, 시스템 입출력 관계에서도 도출할 수 있음에 착안하여, LuGre 모델을 기반으로 하는 수직항력 관측이 가능한 보상기 적용과 동시에 제어 입력과 시스템 출력 관계를 적응규칙을 통해 질량추정기를 설계하여 제어 입력의 스케일로 사용함으로써 그 성능을 더욱 향상시키고자 하였다.