• Journal of the Korean Society for Nondestructive Testing
• /
• v.15 no.4
• /
• pp.540-548
• /
• 1996

In general residual stress is measured by X-ray diffraction method but in case of bonding residual thermal stress it is inadequate technique to examine the stress singularity. Therefore Two-dimensional elastic boundary element analyses were carried out to investigate the residual thermal stress and stress singularity of bonding interface in Al/Epoxy. This boundary element results were compared with the strain gauge measurements. The effects of different interface models, sub-element and adherend thickness are presented and discussed. On the basis of the obtained results, interface delamination causing by normal stress is expected and stress singularity is observed more intensively increasing with adherend thickness. It is concluded that the bonding strength of Al/Epoxy interface can be estimated correctly by taking into account the stress singularity at the edge of the interface.

• Resources Recycling
• /
• v.25 no.4
• /
• pp.49-53
• /
• 2016

The electro-refining process was performed to purify the casted tin crude metal from waste tin in methanesulfonic acid. The surface morphologies of electrodeposited tin on cathode were observed, the dendrite and delamination were inhibited by glycol group of organic additive. The impurity concentrations of tin crude metal and deposited metal were analyzed using ICP-OES. Quantitative analysis on casted tin crude metal showed that it consists of tin with 97.280 wt.% and several impurity metals of Ag, Cu, Pb, Ni, and etc. After tin electro-refining, the purity of tin increased up to 99.956 wt.%. Reduction current by cyclic voltammetry seems to be closely related to behavior of impurity in tin electro-refining.

• Journal of Conservation Science
• /
• v.31 no.3
• /
• pp.319-330
• /
• 2015

This study attempted to review the chemical composition of 25 samples of Sangpyeongtongbo having different manufacturing place and period, and then to find the manufacturing method. As a result of chemical composition analysis of Sangpyeongtongbo, main components include Cu, Zn and Pb, and some samples contained Sn and Fe. But, the chemical composition of each Sangpyeongtongbo varied with big differences. When the main content change was examined, Cu and Sn became decreased at the later period, and Zn and Pb had higher contents. The difference in the ingredient content had close relation for the profit of Sangpyeongtongbo. When refined microstructure was observed, 25 kinds of Sangpyeongtongbo had developed different types of microstructure such as dendrite, large grain and grain refinement. But, 25 kinds of Sangpyeongtongbo had no heat treatment processing. And, the types of microstructure were difference, which seems because different microstructure was developed due to the difference of Sn and Fe and cooling speed in Sangpyeongtongbo.

• The Korean Journal of Applied Statistics
• /
• v.28 no.4
• /
• pp.781-805
• /
• 2015

The National Welfare Pension Act of 1973 and the National Pension Act of 1986 were legislated for an anticipative response to future population ageing. But the enforcement of these acts gained momentum as they became effective tools to realize the present potential demographic bonus. This article investigates the history related to the enactment of these two acts, focusing on these acts' role in raising funds managed by the government (National Investment Fund and National Housing Fund). This article shows the historical origin of full-dress debates on the sustainability of the National Pension Fund.

• IMMUNE NETWORK
• /
• v.5 no.1
• /
• pp.36-44
• /
• 2005

Background: The anti-tumor therapeutic effect of autologous tumor cell lysate pulseddendritic cells (DCs) was studied for non-immunogenic and immune suppressive lung cancer model. To test the possibility as an adjuvant therapy, minimal residual disease model was considered in mouse in vivo experiments. Methods: Syngeneic 3LL lung cancer cells were inoculated intravenously into the C57BL/6 mouse. Autologous tumor cell (3LL) or allogeneic leukemia cell (WEHI-3) lysate pulsed-DCs were injected twice in two weeks. Intraperitoneal DC injection was started one day (MRD model) after tumor cell inoculation. Two weeks after the final DC injection, tumor formation in the lung and the tumor-specific systemic immunity were observed. Tumor-specific lymphocyte proliferation and the IFN-${\gamma}$ secretion were analyzed for the immune monitoring. Therapeutic DCs were cultured from the bone marrow myeloid lineage cells with GM-CSF and IL-4 for 7 days and pulsed with tumor cell lysate for 18 hrs. Results: Compared to the saline treated group, tumor formation was suppressed in 3LL tumor cell lysate pulsed-DC treated group, while 3LL-specific immune stimulation was minimum. WEHI-3-specific immune stimulation occurred in WEHI-3 lysate-pulsed DC treated group, which had no correlation with tumor regression. Conclusion: The data suggest the possible anti-tumor effect of cultured DCs as an adjuvant therapy for minimal residual disease state of lung cancer. The significance of immune modulation in DC therapy including the possible involvement of NK cell as well as antigen-specific cytotoxic T cell activity induction was discussed.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.6
• /
• pp.35-42
• /
• 2000

In this paper, AE(Acoustic Emission) signals detected from the growth of the electrical tree in an epoxy resin under ac high-voltage application were analysed to diagnose the insulation deterioration of cast-resin power transformer. Frequency spectra of AE signals generated from the magnetizing and the load currents in the actual operating cast-resin power transformer of 500[kVA] under distribution system of 22.9[kV] were also analysed to distinguish the AE signals due to void discharges from the magnetic circuit noises in the core of the transformer. As the experimental results, we could distinguish the AE signals whether those signals were caused due to the void discharges or due to the magnetic circuit noises by analyzing the frequency spectrum of AE signals. The frequency spectra of AE signals generated from the cast-resin power transformer in operation due to both the magnetizing and the load currents appeared in the range of 40-120[kHz], but the frequency band of AE signals emitted from the void discharges in an epoxy resin sample was about 50[kHz] to 230[kHz].

• Fire Science and Engineering
• /
• v.16 no.1
• /
• pp.39-44
• /
• 2002

In this paper, we analysed the flame patterns and the electrical characteristics of the electric outlet which was fired at standby mode. The carbonized patterns indicated that the flame had spread about 50 cm to 70 cm. After the combustibles on wall started to burn, the temperature went up to about $300^{\circ}c$ in 150 sec. The flame formed ceiling jet and spread quickly. The tracking was generated at the shortest distance between two electrodes and the resistance was about 100$\Omega$ to 300$\Omega$ As the result of analysis using metallurgical microscope, the normal part of a blade holder showed amorphous structure, but the melted part of a blade holder damaged by tracking showed dendrite structure and void evenly. When the blade holder of damaged outlet was analyzed by SEM and EDX, we found that the structure and components of the normal part were different from those of melted part.

• The Korean Journal of Mycology
• /
• v.21 no.3
• /
• pp.224-229
• /
• 1993

The optimum temperature for germination of conidia and germ tube elongation were between $20\;and\;30^{\circ}C$ in C. dematium and C. gloeosporioides. Appressoria were fairly formed well at $20^{\circ}C$ despite the delay of conidial germination. At $30^{\circ}C$, both the germination and germ tube elongation are favored, but appressoria were poorly detected to be formed. In C. acutatum, the optimum temperature for germination of conidia was from $20\;to\;30^{\circ}C$, but at $25^{\circ}C$, germ tube elongation are accelerated. The conidia become septate and one or both doughter cells become conidiogenous instead of producing germ tubes and a secondary conidia produced, resulting in an arborescent type of connected conidia. Appressoria are infrequently formed by germinating conida. At $20\;to\;25^{\circ}C$ was the optimum for appressorium formation. But conidia that germinated at $30^{\circ}C$ seemed to lose the ability to form appressoria. The relation of temperature to germination of conidia and appressorium formation in Colletotrichum acutatum, C. dematium and C. gloeosporioides are discussed.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.79-79
• /
• 2011

최근 플라스틱 제품의 사용후 폐기에서 발생 되는 환경적인 문제점들이 대두 되고 있는 가운데, 이러한 제품에 대한 친환경적인 재료 설계에 대한 요구가 거세지고 있는 실정으로 플라스틱 업계의 사활이 걸릴 정도의 중요한 문제로 부각되고 있다. 본 연구에서는 이러한 플라스틱 제품의 치명적인 환경적인 문제점을 극복하고자, Matrix 물질이 되는 플라스틱에서 부터 친 환경적인 생분해성 수지를 사용하면서, 물성의 강화제로써 천연물 유래의 여러 종류의 섬유를 사용하고자 하였다.가장 보편화된 생분해성 플라스틱인 지방족 폴리에스테르 계통의 생분해성 수지와 Polylactic acid에 대해 검토를 하였다. 지방족 폴리에스테르 의 경우는 기존 플라스틱 제품과 비교해서 유연하고, 신장율이 높고, PLA 대비 내열 사용한계 온도도 높아서 물성적인 측면에서 상당한 장점을 가지고는 있으나 가격이 매우 고가이므로, 기존 플라스틱을 대체하는 것에는 문제점이 있다. 반면 PLA의 경우 지방족 폴리에스테르 대비 절반 이하의 가격이고 기계적 강도 또한 매우 높기 때문에 기존의 플라스틱을 대체할 수 있는 가장 유력한 물질로 대두 되고 있으나, 사출물과 같은 충격이 요구되는 제품에 있어서는 PLA 고유의 약한 취성이 가장 큰 단점으로 지적되고 있다. 본 연구에서는 이러한 PLA를 기반으로 PLA의 장점이 기계적 강성을 유지하면서, 취성을 보완하기 위해 PBS를 혼합 할 수 있는 기술을 개발하였으며, 또한 원재료의 Cost를 줄이고, PBS 혼합에 따른 PLA의 기계적 강도 감소를 보완하기 위해 천연물 유래의 Wood fiber, Starch, Bamboo fiber, Cellulose fiber, Paper fiber 와 같은 각종 천연 Filler를 사용하여 기계적 기계적 강도 감소를 최소화 하였다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.105-105
• /
• 2011

국내 해양레저산업 중 세일요트산업은 현재 초기시장을 형성하고 있으나, 현재 정부의 해양레저 활성화 정책과 해양레저 인구 또한 관련 협회, 클럽 등의 중심으로 급속한 증가세를 이루고 있다. 이에 요트수요 증대에 따라 요트 관련 부품 소재의 경우에도 향후 그 수요가 대폭 증가할 것으로 예상되어지고 있으며, 그 중 요트용 돛(Sail)의 경우에는 전량 해외 수입에 의존하고 있어 제품개발을 통해 국산화함으로써 해외 제품의 수입대체가 요구되고 있다. 본 연구는 해외의 산업용 폴리에스터 원사로 제조된 요트세일 제품의 특성 및 성능 분석 결과와 국산 고강력 폴리에스터 소재로 제조된 요트 세일 개발 제품의 물성 및 성능을 비교 분석하고자 한다. 세일 제품 개발을 위해 해외 요트용 세일 제품을 분석한 결과, 소재는 고상중합형태의 폴리에스터 산업용 원사를 사용하여 직물자체의 고강도 및 저신도 특성발현을 위한 고밀도 제직을 실시한 것으로 분석 되었으며, 가공에서는 해양에서 사용하는 세일 직물의 특성 상 일광 및 자외선에 대한 내구성을 높이고, 황변을 방지할 수 있도록 하기 위해 직물표면에 멜라민계 수지를 이용한 함침방식의 특수코팅을 실시한 것으로 분석되었다. 이러한 해외 요트용 세일 제품의 분석결과를 바탕으로 국산 고강력 폴리에스터 고밀도 직물에 자외선 및 일광에 대한 내구성이 우수한 무황변 타입의 폴리에스터계 수지를 사용하여 단면 코팅으로 양면코팅 가공효과를 부여하는 나이프 방식의 특수코팅, 에이징 처리를 통해 세일을 제조하였다. 본 연구에서는 제조된 세일 직물 제품에 대해, 물리적 특성을 분석하기 위해 인장 강신도, 무게, 두께 및 주사전자현미경 관찰 등의 테스트를 실시하였으며, 세일 성능 분석을 위해 공기투과도, 일광견뢰도 자외선 조사 후 강도변화, 황변 Test 등의 테스트를 실시하여, 해외 선진 제품과 개발제품의 물성 및 성능에 대해 고찰하였다.