• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.130-131
• /
• 2013

캐비테이션 현상은 고 유속 환경에서 발생(inception), 성장(growth), 붕괴(collapse) 및 소멸(disappearance) 과정이 반복적으로 일어나며 그 과정에서 기포붕괴에 따른 큰 충격압력을 방지하려는 분야와 이를 능동적으로 산업분야에 적용하려는 분야로 크게 대별된다. 본 연구에서는 캐비테이션의 붕괴거동을 수중 초음파 진동자에서 미세기포를 발생시켜 PIV기법을 이용하여 유동장을 계측하였다. 초음파 진동자는 직경 16 mm이며, 진동주파수는 20 kHz, 진폭은 $5{\mu}m$, $10{\mu}m$, $30{\mu}m$ 및 $50{\mu}m$를 각각 적용하였다. 유동구조, 난류강도, 레이놀즈 응력에 대한 통계적 유동정보를 계측한 결과 충격압력의 원인으로 알려진 캐비티 붕괴로 인해 유동특성을 확인하였다.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.4
• /
• pp.21-29
• /
• 2005

Lightweight Foamed Soil (LWFS) could be the substitute of normal soils used in backfill to earth structures and embankment materials far soft ground improvement in port and harbor project because of its effectiveness in settlement reduction and earth pressure decrease due to its lightness. A series of triaxial and unconfined compression tests were performed to investigate behaviors of LWFS composed of dredged soils, cement and air foam, and cured at underwater conditions. The density of LWFS will increase if LWFS is cured at underwater conditions because high water pressure makes air foam disappear or demolish during the curing compared with LWFS cured at normal air conditions. This paper is to find the mechanical behaviors of LWFS cured at seawater depth of 5.0 m and 10.0 m, respectively, which simulates underwater curing conditions by underwater pressure simulator chamber developed during this study. In addition, new normalized factor formula, which takes account of mixing design conditions determining compressive strength of LWFS, was proposed to consider mixing design factor fur LWFS.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.6
• /
• pp.466-473
• /
• 2011

The buoyancy and initial momentum fluxes make near-field dominated by buoyant jet when thermal discharge releases underwater. In order to estimate prediction capabilities of those near-field phenomena, non-hydrostatic RANS applied CFD(Computational Fluid Dynamic) model was used. Condition of model was composed based on past laboratory experiments. Numerical simulations carried out for the horizontal buoyant jet in the stagnant flow and vertical buoyant jet into crossflow. The results of simulation are compared with the terms of trajectory and dilution rate of laboratory experiments and analytic model(CorJET) results. CFD model showed a good agreement with them. CFD model can be appropriate for assessment of submerged thermal discharge effect because CFD model can resolve the limitations of near-field analytic model and far-field quasi 3D hydrodynamic model. The accuracy and capability of the CFD model is reviewed in this study. If the computational efficiency get improved, CFD model can be widely applied for simulation of transport and diffusion of submerged thermal discharge.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.2
• /
• pp.10-15
• /
• 1997

The hydrophones is mounted in many applications on a vibrating surface and functions as an underwater acoustic signal receiver without sensing the vibrations from the mounting surface. However, their performance is usually degraded by the interference of exterior noises such as acoustic cavitation in water stream, host structural vibration in the hull, and propeller motions. This paper describes the design and evaluation of a self noise suppressing hydrophones which shows very poor sensitivity to the external noises, first, effects of the external noise on the its receiver performance is simulated with finite element method(FEM). Second, the geometrical variations are implemented on the original structure that include additional air pockets and acoustic walls which work as acoustic shied or scatter of the noises. The results show that the effect of the external noise is the most significant when it is applied near to the bottom of the side wall of the hydrophones. The transverse noise induced by the outside water flow is isolated most effectively when a thin compliant (damping) layer combined with two air pockets is inserted to the circumference of the nose. Noise level is reduced about fifty nine percent of that of the original structure.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.5
• /
• pp.263-270
• /
• 2018

In most industry fields concerning external flow noise problems, the hybrid computational aeroacoustic techniques based on the FW-H (Ffowcs Williams and Hawkings) equation are widely used for its numerical efficiency. However, when the surface integral form of FW-H equation is used without volume quadrupole sources, it is known to generate significant non-physical noise in a certain case. Especially, in the case of a flow in which the tip vortex cavitation is formed in the distant downstream direction such as flow driven by an underwater propeller, the accuracy in noise prediction becomes poor unless it is not properly modelled. Therefore, in this study, the nonphysical acoustic waves caused by the surface integral form of FW-H equation is reduced by adding the quadrupole correction term. First, to verify the accuracy of the in-house code of FW-H equation, the noise by an axial fan used in the outdoor unit of air conditioner was calculated and compared with the results of ANSYS Fluent. In order to verify the effects of the quadrupole correction term, the noise prediction for isentropic vortex convection is performed and it is confirmed that the error is reduced by the quadrupole correction term. Finally, the noise prediction is performed for the flow field generated by the Clark-Y hydrofoil in underwater. It is confirmed that the error caused by the cavitation passing through the integral surface can be reduced by the quadrupole correction term.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.569-574
• /
• 2015

지난 수십 년간 유체역학적인 관점에서 곤충이나 새의 움직임을 모방하기 위해 진동하는 익형(pitching airfoil)과 동적 실속에 관한 많은 연구가 진행되어 왔다. 그러나 유동박리가 일어나지 않는 범위 내에서 진동하는 익형의 특성에 대한 연구는 보기 드물다. 또한 기존의 유동박리가 일어나지 않는 영역에서 익형의 진동 현상에 대해 수행된 연구는 수중과 같이 낮은 레이놀즈수에서 수렴되었기 때문에, 공기 중과 같이 높은 레이놀즈수에서 유동현상과 다른 특성을 보여주고 있을 수 있다. 따라서 본 연구는 높은 레이놀즈수에서의 다양한 환산 진동수, 받음각진폭, 익형에 따른 공력특성을 분석하였다. 그 결과, 익형의 진동으로 인한 양력계수의 차이는 작음을 알 수 있었다. 그러나 높은 환산 진동수에서 익형의 항력계수가 감소하는 경향이 나타나며, 이로 인해 높은 환산 진동수에서 수치적으로 추력이 발생할 수 있음을 확인하였다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.3
• /
• pp.372-377
• /
• 2010

The objective of this study is to predict the drag of an axisymmetric underwater vehicle with bluff afterbody using CFD. FLUENT, commercial CFD code, is used to simulate high Reynolds number turbulent flows around the vehicle. The computed drag coefficients are compared to available experimental data at various Reynolds numbers. Four widely used two-equation turbulence models are investigated to evaluate their performance of predicting the anisotropic turbulence in a recirculating flow region, which is caused by flow separation arising from the base of the vehicle. The simulations with Realizable ${\kappa}-{\varepsilon}$ and ${\kappa}-{\omega}$ SST turbulence models predict the anisotropic turbulent flows comparatively well and the drag prediction results with those models show good agreements with the experimental data.

• Journal of the Korean Society of Visualization
• /
• v.18 no.3
• /
• pp.35-41
• /
• 2020

We conduct numerical simulations of the interaction of a deformable structure with two-phase compressible flow. The finite volume method (FVM) is used to simulate fluid phenomena including a shock wave, a gas bubble, and the deformation of free surface. The deformation of a floating structure is computed with the finite element method (FEM). The compressible two-phase volume of fluid (VOF) method is used for the generation and development of a cavitation bubble, and the immersed boundary method (IBM) is used to impose the effect of the structure on the fluid domain. The result of the simulation shows the generation of a shock wave, and the expansion of the bubble. Also, the deformation of the structure due to the hydrodynamic loading by the explosion is identified.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.8
• /
• pp.1732-1739
• /
• 2004

In this paper, we proposed a visualization system with ANN algorithm that traits the motion of particles that move colliding in the water, where we got a great deal of variable information and predicts the distribution of particles according to the flowing of water and the pattern of their precipitation. We adopted ART2 to detect sensitively the collision between particles in this visualzation. Various particles and their mutual collision influencing the force such as buoyancy force, gravitational force, and the pattern of precipitation are considered in this system. Flowing particles whose motion is changed with the environment can be visualized in the system presented here as they are in real water.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.1
• /
• pp.78-85
• /
• 2014

LNG-RV has the additional equipments that enable to re-gastify liquefied LNG in LNG carrier. This vessel has Submerged Turret Loading(STL) system which transports gas through submarine terminal. When LNG-RV is operating at sea, the opening condition is formed by detaching STL equipment from a vessel. The primary objective of the current work is to estimate accurate speed loss for the opening condition of the LNG-RV employing numerical calculations and model tests. In the model tests, resistance and self-propulsion tests are carried out for the bare-hull and the opening condition without STL. In addition to these, flow visualization utilizing tuft is used to make the flow patterns visible, in order to get a qualitative or quantitative information for inner part in case of detaching the STL.