• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.408-412
• /
• 2006

단면평균 1차원 수치모형의 수중구조물 표현방식으로 흔히 사용되는 월류공식의 유량계수를 범용 난류유동 수치모형인 FLUENT를 사용하여 완전월류와 불완전월류의 전구간에 걸쳐 구하고 공식화한 결과를 제시한다. 수중구조물은 고무댐과 Ogee형 월류보의 2가지를 대상으로 하였다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.7 no.5
• /
• pp.187-197
• /
• 2007

Experimental study for a submerged structure was conducted to protect coastal structures and shorelines. The rectangular submerged structure known as the most efficient shape among various submerged structures in the literature was fabricated at the nose of a rubble mound breakwater. The reflection coefficients and the run-up heights along the slope of a breakwater were measured for different significant wave heights and periods. It is found in this study that the reflection coefficient is affected more relatively by the significant wave period than the significant wave height and the run-up heights are reduced approximately 28% in terms of ${^{RU}}_{2%}$ and 26% in terms of ${^{RU}}_{33%}$, respectively, by the installation of a submerged structure inducing the interception and breaking of waves.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.5
• /
• pp.485-496
• /
• 2020

Submerged structures such as low-crested breakwaters and artificial reefs have been commonly used for coastal protection. In this study, two-dimensional laboratory experiments were conducted in a wave flume to investigate the wave transmission phenomena of permeable type submerged structures armored by Tetrapods. Different cases of the experimental conditions were included by relative crest depth, relative freeboard, relative crest width, wave steepness and so on. An empirical formula from the experimental data was proposed to predict the wave transmission coefficients over various specifications and structural designs of the permeable type submerged structure. The proposed formula successfully predicted the wave transmission coefficients. In this study, the proposed empirical formula of the wave transmission over the submerged structure was improved from the existing formula.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.1
• /
• pp.1-9
• /
• 2001

유체-구조물 상호작용 효과를 고려하여, 실린더형 수중 구조물의 유한요소 모델을 상용 전산코드를 사용하여 작성하고 동적하중에 대한 응답해석을 수행하였다. 구조 유한요소에 부착되는 유체 유한요소로 인하여 발생하는 요소행렬의 비대칭성으로 인하여, 일반적으로 사용되는 유한요소 해석 전산코드로 유체-구조물 상호작용 모델에 대한 응답스펙트럼해석을 수행하는 것은 불가능하다. 이 문제의 해결을 위하여, 등가 비 유체-구조물 상호작용 모델을 구성하고, 등가비 유체-구조물 상호작용 모델에 대한 응답스펙트럼 해석 및 조화가진 응답해석 결과를 이용하여 유체-구조물 상호작용 모델의 스펙트럼 가진에 대한 동적 응답을 계산할 수 있는 효율적인 방법을 제시하였다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.1
• /
• pp.63-69
• /
• 2008

It has an important meaning that the maintenance and management of facility for a onshore construction shall be damaged by oceanic environment. A movement and displacement of these shall be investigated by up-to-date machinery tools like GPS and Lidar and MBES & Gyro. In current a lot of tools and methods for investigation shall be used as a displacement and movement on land mainly. For underwater facility it is very difficult to check because of special conditions below the water surface. In this study, a surveying methods for a movement and displacement of underwater facility as caisson shall be used, i.e. multibeam-echo-sounding system. A possibility as basic data for displacement and environmental monitoring shall be studied by MBES to acquire a caisson's inclination.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.4
• /
• pp.401-408
• /
• 2005

Presently many constructions establish in underwater, but approaching to underwater constructions are difficult, for comparing with ground, underwater environment is different in media. Usually measurement methods for underwater constructions are using tapes, using depth gauges, using acoustic positioning systems. But, tapes are hard to measure the correct distance, for applying a right tension is not easy in underwater. Depth gauges have a weakness in settling, for it takes long time to do it. Acoustic positioning systems don't work well in confined spaces and cost a lot. Hence, the purpose of this study is, at first, to understand rays path in multimedia like water, glass and air. The second thing is to perform a camera calibration at the field to compare with the interior orientation parameter. And the third thing is to find out whether photogrammetry is applied for underwater object in using cube for accuracy examination. The last thing is to perform underwater photogrammetry about underwater object, which is pier model and riverbed. We came to the conclusion through this experiment that the applying underwater photogrammerty for underwater constructions and underwater ground is possible.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.5
• /
• pp.497-507
• /
• 2020

Two-dimensional laboratory experiments were conducted in a wave flume to investigate the wave transmission phenomena of rubble-mound type submerged structures armored with Tetrapods. Different experimental conditions were included by considering relative crest depth, relative freeboard, relative crest width, wave steepness, and so on. An empirical formula was proposed to predict the wave transmission coefficients over various specifications and structural designs of the partial perforated (rubble-mound) type submerged structure from the experimental results. The proposed formula successfully predicted the wave transmission coefficients. In this study, the proposed empirical formula of the wave transmission over the rubble-mound type submerged structure was improved from the existing formula.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.6
• /
• pp.593-601
• /
• 2020

Two-dimensional laboratory experiments were conducted in a wave flume to investigate the wave transmission phenomena of impermeable-type submerged structures armored by concrete blocks. Different experimental conditions were included by considering relative crest depth, relative freeboard, relative crest width, wave steepness, and so on. An empirical formula was proposed to predict the wave transmission coefficients over various specifications and structural designs of the impermeable submerged structure from the experimental results. The proposed formula successfully predicted the wave transmission coefficients. Therefore, in this study, the proposed empirical formula of the wave transmission over an impermeable submerged structure was improved from the existing formula.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.4
• /
• pp.178-182
• /
• 2008

In measurements of the vibration of structures underwater with a laser Doppler vibrometer, the surface vibration is measured by means of detecting the phase change of the laser beam due to the structural vibration. The laser beam passes through the sound field radiated from the vibrating structures underwater. It experiences an additional phase change due to the change in refractive index in the radiated sound field. This phase change due to the sound field may cause the error in surface vibration measurements. In this paper, this phase change due to the radiated sound filed has been analyzed. The numerical simulation has been peformed to evaluate the phase change in sound field radiated from an infinite cylindrical structure vibrating underwater.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.34 no.6
• /
• pp.211-221
• /
• 2022

The wave runup height is one of the most important parameters for affecting the design of coastal structures such as dikes, revetments, and breakwaters. In this study, SWASH (Zijlema et al., 2011), a non-hydrostatic pressure numerical model, was used to analyze the effect of reducing The wave runup height of solitary waves by submerged and floating rectangular obstacles. It was confirmed that the SWASH model reproduces the propagation, breaking, and runup of solitary waves quite well. In addition, it was confirmed that the wave deformation of the solitary wave by submerged and floating rectangular obstacles was well reproduced. Finally, we conducted an examination of the effect of reducing the runup height of submerged and floating rectangular obstacles. Reduced runup heights are calculated and the characteristics of runup height reduction according to the dimensions of the obstacle were analyzed. The energy attenuation effect of the floating obstacle is greater than the submerged obstacle, and it is shown to be more effective in reducing the runup height.