• Korean Journal of Agricultural Science
• /
• v.22 no.1
• /
• pp.42-48
• /
• 1995

With the aim to investigation of decay resistance and optimum concentration in chrome-copper-arsenic(CCA) preservative treatment on the imported softwoods from Siberia and North america, preservative absorption after CCA impregnation, weight losses and degradation patterns by decay fungi were examined. The density and latewood rate of Siberia softwoods(Spruce and Larch) were higher than those of North america softwoods(Douglas-fir and Western hemlock), resulting in the decrease of the CCA preservative absorption in the Siberia softwoods. In the case of untreated softwoods, decay resistance against Coriolus versicolor was lower than against Tyromyces palustris. For CCA treated softwoods, preservative effectiveness increased with increase in concentration of CCA solution. When treated with 0.7% CCA solution, efficiency value was more than 80 and 90 for C. versicolor and T. palustris, respectively. From this results, in the CCA preservative treatment for imported softwoods, it can be concluded that optimum concentration of CCA solution is approximately 0.7%. The absorption of CCA preservative distributed in the range of 3.8 and $5.5kg/m^3$. After exposure to testing fungi, in the untreated softwoods, bore holes formed in the cell walls and bordered pits, moreover, bordered pit canals enlarged by the fungi. However, 0.5% CCA treated softwoods was almost no deterioration in the cell walls and bordered pits due to decay.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.14 no.1
• /
• pp.28-38
• /
• 2012

This study was conducted to investigate growth performance, photosynthesis, water use efficiency (WUE), and stomatal conductance ($g_s$) of container seedlings of Liriodendron tulipifera and Zelkova serrata growing under three different irrigation periods (1 time/1 day, 1 time/2 days and 1 time/3 days) for high seedling quality. The root collar diameter and height of L. tulipifera and Z. serrata seedlings were highest with 1 time/1 day irrigation, whereas they were lowest with 1 time/3 days irrigation. The two species showed low drought tolerance. As irrigation period was shortened, biomass and seedling quality index (SQI) of the two species increased. The ratio of height to root collar diameter (H/D) and the ratio of below to aboveground biomass (T/R) of the two species were lower with 1 time/3 days than at other irrigation periods. L. tulipifera and Z. serrata seedlings showed significantly higher photosynthetic capacity with 1 time/1 day irrigation. As irrigation period was shortened, $g_s$ of two species increased, while their WUE decreased significantly (P<0.05) These results show that 1 time/1 day irrigation provides the most optimal water condition for container seedling production of two species and irrigation controlling is very important for growth and quality of container seedlings.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.14 no.2
• /
• pp.45-52
• /
• 2012

Enrichment planting is commonly used for increasing the density of tree species in secondary forests and one of forest rehabilitation programs in Lao PDR. This study aimed to determine the performance of five native species in enrichment planting using different canopy opening treatments, and to examine the suitable species and silviculture techniques applicable to a logged-over forest in Lao PDR. Results of the study showed that only crown height had significant difference among species and planting treatments. The survival rate and crown diameter were significantly different by species, but not by planting treatments. However, root collar diameter (RCD) and height of seedlings showed significant differences among planting treatments. Among the study species, Hopea odorata and Dalbergia cochinchinensis showed significantly higher survival rate and height growth, indicating their suitability in enrichment planting for rehabilitation of forest in Lao PDR. The results also suggested that 2 m width line planting stimulated RCD growth, but wider line planting, such as gap planting, promoted height growth of seedlings.

• Korean Journal of Environment and Ecology
• /
• v.33 no.5
• /
• pp.587-595
• /
• 2019

This study analyzed the influence of the environmental factor of each vegetation type in an urban, mountainous park (Tangeumdae Park in Chungju) on air ion. The measuring points were divided according to the tree species, diameter at breast height, crown density, and layered structure, and the meteorological factors and the air ion were measured. The results of the measurement showed the average generation of positive ions of $610.90{\pm}50.27ea/cm^3$, the average generation of negative ions of $723.58{\pm}64.25ea/cm^3$, and the air ion index of $1.19{\pm}0.10$. The results of the analysis, according to the vegetation type, are as follows. Firstly, the air ion varied according to the species, the chest diameter at breast height, and the layered structure, and was analyzed to be statistically significant. Secondly, the air ion and the vegetation type showed a positive correlation with the species, diameter at breast height, crown density, and layered structure. The cation showed a negative correlation with the species, diameter at breast height, and the crown density, and the anion showed a positive correlation with the species, the diameter at breast height, crown density, and layered structure. Thirdly, the ion index in ridges had a higher correlation with the vegetation type than the meteorological factors. In detail, the correlation was higher in the species > layered structure > crown density > diameter at breast height. This study had the limitation of evaluating air ions in the ridge. Therefore, future studies on air ion should consider both terrain structure and vegetation type and analyze the seasonal changes and comparison.

• Korean Journal of Environment and Ecology
• /
• v.36 no.5
• /
• pp.496-506
• /
• 2022

The growth of trees planted through transplantation rapidly decreases immediately after planting due to extreme disturbances such as root cutting and crown damage. Although the growth rate is recovered as time elapses, the time required to restore the original growth varies by species. Therefore, it is necessary to set an appropriate tree management period for survival after transplantation by analyzing each species' annual growth change. In this study, we analyzed the growth amount of deciduous broad-leaf species planted in the area where the riparian ecological belt was formed and proposed the management period based on the results. Slowed growth immediately after planting is a common phenomenon due to root cutting and pruning, the pre-works performed to increase tree survival rate during the transplantation process. Afterward, the original growth rate is recovered as time passes, but the time required may vary depending on the species and planting environment. Most of the trees showed a rapid decrease in growth immediately after transplantation. After that, although it is different for each species, most of them showed a gradual recovery from 2 years onwards. The analysis of the growth rate by tree species confirmed that it took 2 to 4 years, depending on the tree species, to recover the growth level before transplantation after a rapid decrease in growth immediately after transplantation. The results suggest that improving the defect rate of planted trees is necessary to meet the project objectives: ecological restoration and pollutant reduction. It requires setting a tree management period of at least two years and creating an appropriate base environment.

• Conservation Science in Museum
• /
• v.13
• /
• pp.33-36
• /
• 2012

Analysis of Flat board-shaped Lacquer ware excavated from Daho-ri was conducted. The result of species identification is identifed as Pinus spp. As a result of microscopic observation, lacquer fragment is consist of 5 layers and its thickness is about 100 ㎛. Infrared spectroscopy of the lacquer ware revealed that they had a very similar absorption band as refined lacquer, confirming that they were painted with lacquer. Result of Analysis for Circular metal ornament is alloy smelted by tin and lead. It is called Pewter. While The species of wooden objects investigated until now is broad-leaved tree; the species of flat board-shaped lacquer ware is conifer.

• Journal of Conservation Science
• /
• v.18 s.18
• /
• pp.105-110
• /
• 2006

The purpose of this study is to identify the species and to date the coffin woods that were excavated at a tomb (husband and wife) in Hopyungri, Namyngju, Korea. Twenty-three wood specimens of the two coffins were analyzed for identifying their species. All coffin woods were Pinus spp. (hard pine). 'Sabs'(ritual utensils that prevent demon) were made from Tilia spy. Tree-ring dating proved that the husband's coffin was made from the wood which was cut around 1620 and the wife's one at a little earlier period.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.3 s.131
• /
• pp.11-21
• /
• 2005

The purpose of this study was to identify the species of the woods used in the main building (Daewoongjeon) of Bulgapsa temple in YeongGwang. Eighty eight woods sampled were divided into four parts; pillars(21), rafters(19), purlins(16) and other wood elements(12). Four species were identified; Pinus spp. (hard pines; diploxylon), Abies spp., Quercus spp. and Zelkova serrata Makino. Pillars and corner-angle rafters were mainly Zelkova; however, other wood elements were mostly Pinus spp. The high ratio of Zelkova in this building would be ascribed to the preference of this species to pines owing to its superior quality before the late Chosun Dynasty.

• Korean Journal of Environment and Ecology
• /
• v.7 no.1
• /
• pp.1-5
• /
• 1993

To examine aluminum toxicity on woody plants, aluminum solution and ground water(pH 6.75) were treated on the seeded pot (48$\times$33$\times$9cm) of Pinus thunbergiana, Thuja orientalis and Ligustrum obtusifolium, filled with sand, three times per week, 5mm per time, from April 28, 1993 to June 16. Aluminum solution were prepared 1.0, 2.5 and 5.0mM aluminum potassium sulfate, dilulted with ground water. Growth-related characters(seedling number, seedling height, top, root and total dry weight) were measured and compared among species and treatments. The response of seedling growth-related characters to aluminum solution treatment differed among the species, and the most sensitive species is Ligustrum obtusifolium, and the most tolerant species is Pinus thunbergiana.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.1
• /
• pp.22-55
• /
• 1987

This study was executed to offer the basic data needed to plywood industry in Korea for the future based on microscopic wood features as our previous paper reported by the macroscopic features. Microscopic wood characteristics for 50 species selected by the viewpoint of possible utility in future were examined and described by the species. Also, keys for the identification based on microscopic features were briefly prepared and presented by gymnosperm and angiospenn respectively.