• Journal of the Korea Concrete Institute
• /
• v.25 no.4
• /
• pp.457-465
• /
• 2013

This study discussed the influence of mixtures and curing conditions on the development of strength and microstructure of RPC using ternary pozzolanic materials. Through pilot experiment, various RPC was manufactured by adding single or mixed ternary pozzolanic materials such as silica fume, blast furnace slag and fly ash by mass of cement, up to 0~65%, and cured by using 4 types of method which are water and air-dried curing at $20^{\circ}C$, steam and hot-water curing at $90^{\circ}C$. The results show that the use of ternary pozzolanic materials and a suitable curing method are an effective method for improving development of strength and microstructure of RPC. The unit volume of cement was greatly reduced in RPC with ternary pozzolanic materials and unlike hydration reaction in cement, the pozzolanic reaction noticeably contributes to a reduction in hydration heat and dry shrinkage. A considerable improvement was found in the flexural strength of RPC using ternary pozzolanic materials, and then the utilization of a structural member subjected to bending was expected. The X-ray diffractometer (XRD) analysis and Scanning Electronic Microscope (SEM) revealed that the microstructure of RPC was denser by using the ternary pozzolanic materials than the original RPC containing silica fume only.

• Korean Chemical Engineering Research
• /
• v.50 no.5
• /
• pp.783-788
• /
• 2012

Stern tube bearing is a shaft device playing important roles to reduce the friction of axial rotation and to support the weight of shaft. However, because there is no domestic producer of stern tube bering, imported stern tube bearings have many practical problems including prices, delivery and after services. This is why stern tube bearing should be localization. For the purpose of development of polyurethane resin for stern tube bearings, the effect of additives on the hardness, tensile strength and elongation of the polyurethane resin were systematically investigated. For the preliminary researches, depending on the type of curing agent, MOCA type and non-MOCA type polyurethanes were synthesized. Preliminary researches concluded that MOCA type polyurethane resin has more excellent mechanical properties than non-MPCA type for stern tube bearings that Tensile strength and Hardness of non-MOCA type investigated 23 D, 4.3 Mpa. Therefore, MOCA type polyurethane was adapted as base resin of this research. Silica, calcium carbonate and graphite were selected as additives for the enhancement of mechanical properties of polyurethane resin. Effect of the type and the dosage of these additives on the hardness, tensile strength, elongation of the polyurethane resin were experimentally examined. However, addition of calcium carbonate and graphite showed only minor effect on the hardness of the resin. Polyurethane resin with silica showed relatively excellent hardness, tensile strength and improved elongation.

• Journal of Food Hygiene and Safety
• /
• v.15 no.3
• /
• pp.186-198
• /
• 2000

The quality of the management of sanitation in food service establishments (school lunch programs, hospital patient food services, and commercial catering food services) in Korea was reviewed and evaluated, and ten strategies fur future improvement were suggested. They were: (1) An increase of qualified manpower and improvement of the professional training of the staff; (2) Obtaining special facilities exclusively for food service; (3) Improvement of facilities especially the kitchens; (4) Improvement of policy fur procuring raw materials and being assured of their quality by designing some standards and specifications for the raw materials to be purchased; (5) Production and use accurate and reliable kitchen apparatus and instruments; (6) An increase of the laboratory apparatus and instruments for inspection and evaluation of the sanitary level of raw materials and food service environments; (7) Enforced improvement of personal hygiene of the staff; (8) Use of a variety of methods in sanitary education and training; (9) Actively inspect the quality of imported foods; (10) Strengthening the research and accumulation of background data regarding sanitation management. There is a long process from the production of food to eating. The cooking process is the ultimate end of preparation of food before eating. This process sometimes increases the occurrence of food-borne diseases if we mishandle the food, even we obtained safe food. The process can also remove health hazards and reduce the risk from the hazards if we handle the food well although we have unsafe foods. This means the cooking process is a major key to preventing food-borne diseases. The concepts of hazard analysis critical control point (HACCP) should be applied and practiced in food service establishments in Korea as soon as possible.

• Tuberculosis and Respiratory Diseases
• /
• v.51 no.1
• /
• pp.44-52
• /
• 2001

Background : Oxygen concentrators are convenient to operate and economical for patients with chronic obstructive pulmonary disease (COPD). However, oxygen concentrators are not manufactured domestically and the COPD patients are currently treated with imported oxygen concentrators. To evaluate the efficacy and safety of domestically developed prototype oxygen concentrator before clinical application, the efficacy and safety of the domestic oxygen concentrator were evaluate by comparing with the imported one. Material and Methods : The clinical tests were performed on 36 hyperhydrosis patients from April 1999 to August 1999. Domestic and imported oxygen concentrators were in turn applied to the same patient, who inspired oxygen for 60 minutes at a rate of 3 liters per minute through nasal prong. The oxygen concentrator, which was applied first, was randomly allocated. The arterial partial oxygen pressure ($PaO_2$) was estimated to compare the efficacy; and the carboxy hemoglobin(COHb), pH, arterial $CO_2$ partial pressure, pulse rate, blood pressure, and respiration rate to compare the safety before and after applying each oxygen concentrator. A student t-test was used to analyze the results. Result : In respect to efficacy, the difference in the change of $PaO_2$ before and after the application between two concentrators was not statistically significant. In respect to safety, the differences in the changes of COHb, pH, partial pressure of arterial $CO_2$, pulse rate, blood pressure, respiration rate between two concentrators were also not statistically significant. Conclusion : The domestically developed oxygen concentrator, showed satisfactory efficacy and safety when compared with the imported one.

• Korean Journal of Materials Research
• /
• v.8 no.3
• /
• pp.206-213
• /
• 1998

Cu, Ni, and Mo were ion-diffused into the pure steel powder in the aqueous solution of $(CuNO_3)_2$, $Ni(NO_3)_2)_2$, and $(NH_4)_6Mo_7O_{24}$, to form partial diffusion bond prealloyed steel powder. The mechanical properties, and compacting and sintering characteristics were investigated as a function of Cu. Ni and Mo contents. The results of the this research, it was found that the smallest change of size was observed, and the good degree of hardness and tensile strength was observed when 1.50wt%Cu, 1.75wt%Ni and 0.50wt%Mo was added each other. The powder metallurgy characteristics of partial diffusion bond prealloyed steel powder containing 1.50wt% of Cu, 1.75wt% of Ni and 0.5wt% of Mo were compared to those of distalloy $AB\textregistered$ which was manufactured in Hogani Corporation of Sweden. Partial diffusion bond prealloyed steel powder of this study had good degree of hardness and density, and its dimensional stability was same to that of pure steel powder. Under the same sintering density and temperature, the tensile strength of the ion powder from this research was $15~20Kg/\textrm{mm}^2$ larger than that of distalloy AB'. also the hardness was larger in the magnitude of Hv20-30. When the powder metallurgy heat-treated, hardness and tensile strength were substantially increased.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.6
• /
• pp.672-677
• /
• 2001

There was an outbreak of food poisoning due to eating well-cooked imported tropical fish, Stromateus stellatus on May, 2000, in Korea. Gastrointestinal symptoms such as diarrhea ($92\%$), nausea ($77\%$), abdominal pain ($54\%$), vomiting ($46\%$) and headache ($23\%$) were experienced within $0.5\~2$ hours (median 1 hour) after eating, Any specific natural toxins were not confirmed concerned to those poisoning, but large amount of abnormal lipid ($23\%$) was found from the muscle such as 1-O-diacyl glyceryl ethers (DAGE), which was consisted of $61.8\%$ of total lipid. The 16:0 ($66.3\%$) and 18:1 ($15.8\%$) alkyl chains were dominant in all alkyl chains of DAGE which were presumed as the causative agent for the diarrheal food poisoning. O1eic acid (18:1) was found as a major fatty acid at the sn-2 or 3 in DAGEs. O-16:0-18:1-18:1 ($16.2\%$),O-16:0-18:1-22:1 ($14.7\%$) and O-18:0-18:1-22:1 ($11.0\%$) were contained as the major molecular species of DAGEs by RI-HPLC.

• Journal of the Korean Institute of Gas
• /
• v.18 no.4
• /
• pp.13-20
• /
• 2014

In natural gas distribution system, gas pressure is regulated correspond to requirement using throttle valve which is releasing huge pressure energy as useless form. The waste pressure can be recovered by using turbo machinery devices such as a turbo expander. In this process, excessive temperature drop occurs due to Joule-Thompson effect during the expansion process. Installing natural gas boiler before or after the turbo expander prevents temperature drop. Fuel cell or gas engine hybrid system further improve the efficiency, but 1~2% of total transporting natural gas is used for operating the hybrid system. In this study, a heat pump system is proposed as a preheating device which can be operated without using transporting natural gas. Thermodynamic analysis on evaporating and condensing temperatures and refrigerants is conducted. Results show that R717 is proper refrigerant for the hybrid system with high COP and low turbine work within the defined operating conditions. In domestic usage in Korea, the heat pump system has more economic feasibility owing to natural gas being imported with a high price of LNG form.

• Korean Journal of Weed Science
• /
• v.13 no.1
• /
• pp.7-13
• /
• 1993

Experiments were carried out to investigate the utilization of paraquat and diquat as desiccants for harvest-aid of sesame. When paraquat and diquat were sprayed at 3days or 3hours before cutting of sesame plants, moisture content in treated plots was evenly rapidly decreased and sesame yeild was not significantly different as compared with that in untreated plot. Percentage of germination of sesame seed in treated plots was similar to that in untreated check. Residual amount in sesame seed was not detectable when these chemicals were treated with 250ppm at 3days before cutting of sesame plant. Percentage of thrashing was high in sesame plants treated with paraquat and diauat with the lapse of time after cutting. Required labor in thrashing of sesame was reduced when applied with these chemicals. Harvest efficiency of sesame after spray of paraquat and diquat was good by comparison with the traditional practice.

• Journal of the Society of Disaster Information
• /
• v.17 no.2
• /
• pp.391-402
• /
• 2021

Purpose: By categorizing opinions by subject in the safety certification ecosystem, we want to identify weaknesses in system operation and suggest improvement plans so that the safety certification system can have quick resilience against future variability. Method: Through literature research and data analysis, similar domestic and foreign safety certifications and related cases, as well as the current status of international standards and national standards, etc. were confirmed, and a fact-finding survey was conducted for each stakeholder in the safety certification ecosystem, and problem types and improvement measures were established. Result: We conduct a fact-finding survey of the overall system, such as quality satisfaction with safety certification target products, obstacles in the development, manufacturing and use process, and safety certification-related improvements, targeting workplaces that manufacture, import or use safety certification target machines By discovering and categorizing problems and weaknesses in system operation, detailed implementation tasks were derived to establish improvement directions and improve operability. Conclusion: For the advancement and internationalization of the safety certification system, it is necessary to efficiently carry out the detailed promotion tasks derived from this study. In addition, in order to strengthen the resilience to the variability of the safety certification ecosystem, the operating system of a virtuous cycle structure by improving the mutual relationship between each subject construction is considered important.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.7
• /
• pp.945-952
• /
• 2018

Recently, bass fishing has become a marine leisure sport in Korea. There are 4 major fishing associations in Korea, and each association holds 10-15 tournaments each year. However, supply of 17 ft bass boats, which are preferred in leagues, depends 100 % on imports. In this study, we have derived the main specifications to develop the initial hull forms of a 18.5ft bass boat through statistical analysis based on mothership data. In addition, CFD numerical analysis was carried out according to deadrise angle and longitudinal center of gravity, which strongly influenced the resistance and planing performance. For numerical analysis, design speed was set to $Fn=3.284 (Re=9.858{\times}10^7)$, the deadrise angle was set from 12 to $20^{\circ}$, and the longitudinal center of gravity was set in the range of 0 to $8%L_{wL}$ from the center of buoyancy to the stern. Based on the numerical results, we first set the range of these factors by resistance performance and immersion keel length. Furthermore, using a correlation graph of Savitsky's Drag-Lift ratio, we derived the deadrise angle ($14-16^{\circ}$) and longitudinal center of gravity ($4-6%L_{wL}$).