• Journal of the Korea Concrete Institute
• /
• v.13 no.2
• /
• pp.175-183
• /
• 2001

Immersion tests with artificial seawater were carried out to investigate the resistance to seawater attack of 5 types of cement matrices. From the results of compressive strength and length change, it was found that blended cement mortars due to mineral admixtures, were superior to portland cement mortars with respect to the resistance to seawater attack. Moreover, XRD analysis indicated that the peak intensity ratio of low heat portland cement(LHC) paste, in portland cement pastes, had better results, and so did that of blended cement Paste. Pore volume of pastes by mercury intrusion porosimetry method demonstrated that total pore volume of ordinary portland cement(OPC) paste had a remarkable increase comparing with that of other pastes. In case of immersion of artificial seawater, the use of ground granulated blast-furnace slag and fly ash, however, showed the beneficial effects of 56% and 32% in reduction of total pore volume, respectively.

• Analytical Science and Technology
• /
• v.7 no.4
• /
• pp.455-460
• /
• 1994

A selective extraction-spectrophotometric method for the determination of mercury(II) with nocotinaldehyde-4-phenyl-3-thiosemicarbazone(NPS) was described. The method is based on the formation of an insoluble mercury-NPS complex, which is extratable into chloroform from an aqueous solution at pH 3.5 by shaking for 3 min. The absorbance is measured at 365nm and the molar absorptivity is $2.45{\times}10^4L\;mol^{-1}\;cm^{-1}$. The complex system conforms to Beer's law for up to $18{\mu}g\;mL^{-1}$ of mercury(II). The proposed method is simple and selective and has been satisfactorily applied to the determination of mercury in standard human hair sample.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.28 no.1
• /
• pp.15-30
• /
• 2002

최근 화장품 사용인구의 증가와 안전성에 대한 관심 증대에 따라 화장품 중 유해성분 함유에 대한 논란이 종종 있어왔다. 화장품에 대한 전문적 지식이 없는 사람들에 의하여 진행된 잘못된 정보로 인하여 화장품 중에 포함된 모든 중금속이 인체에 심각한 영향을 초래한다는 등의 오해를 불러와 관련 업계에 적지 않은 피해를 주기도 하였다. 이에 본 자료에서는 구체적 근거자료와 연구 논문들을 기반으로 유해한 중금속, 안전하여 사용이 공인된 중금속 등을 조사하여 화장품에서의 중금속의 개념을 정립하고자 하였다. 국내에서는 식품의약품안전청 고시 제2000-27호에 화장품에 포함되었을 때 유해한 중금속으로 납, 비소 및 수은을 명시하고 그 규제농도를 규정하고 있다. 규제 중금속은 아니지만 피부에 알러지를 일으키는 중금속으로는 니켈이 있는데 화장품 중 몇몇 제품군에서 소량(수∼수십ppm) 이 검출되기도 한다. 그러나 이는 일상으로 사용하는 각종 귀금속, 시계, 안경테, 클립, 지퍼 등의 금속 용품에 포함된 니켈의 양(수∼수십%)에 비하여 매우 적은 양이며 정상적인 사람에게는 무해하다. 실제 대다수의 니켈 알러지는 화장품이 아닌 귀금속이나 시계 등의 금속류 제품 등에 의하여 유발된다. 또한 많은 종류의 중금속 화합물이 화장품 원료로 사용되고 있다. 전세계적으로 널리 사용되는 것으로 크롬, 망간, 비스머스, 구리, 철, 코발트, 티타늄, 아연 등의 화합물이 있으며 이들은 각종 화장품 공정서 및 원료집 등에 수재되어 사용되고 있다. 이들 중 코발트와 크롬이 피부에 유해하다는 몇몇 보고가 있지만, 이는 이들 원소의 수용성염형태의 특정 화합물인 cobalt chloride와 chromate 및 dichromate의 염에 관한 것으로 화장품에서 사용되는 불용성 산화물인 cobalt aluminum oxide, cobalt titanium oxide, cobalt blue, chromium oxde greens 및 chromium hydroide green 등, 국제적으로 널리 사용되는 안전한 중금속 화합물과는 그 특성 및 독성이 판이하게 다르다. 따라서 화장품에서는 매우 안전한 중금속 화합물만이 사용된다. 업계는 유해 중금속에 관해서는 규제에 입각한 엄격한 품질관리에 힘쓰고 중금속의 화학적 분자구조(수용성염 vs 불용성산화물)를 구별할 수 있는 분석방법 개발에 주력하여야 한다. 그리고 안전한 화장품을 사용하고자 하는 소비자의 욕구를 충족시키고 잘못된 인식과 보도로 인하여 안전한 화장품이 유해한 것으로 오도되는 것을 막아야 할 것이다.

• Journal of Environmental Science International
• /
• v.27 no.12
• /
• pp.1279-1290
• /
• 2018

Sea gulls are high trophic level consumers in the coastal environment, and thus, which have been widely used to monitor contamination biomagnified through a food web. However, such monitoring studies using sea gulls have been rare in the Korean literature. The National Environmental Specimen Bank chose eggs of a black-tailed gulls (Larus crassirostris) to serve as an environmental specimen for the long-term monitoring of the coastal ecosystem affected by terrestrial pollutants. Black-tailed gull eggs were collected from Baengnyeongdo, Hongdo and Uleungdo, and their DDTs and total mercury content were determined. The highest concentration of ${\Sigma}DDTs$ was $231.6{\pm}106.1{\mu}g/kg$ wet in Baengnyeongdo, followed by $230.0{\pm}123.8{\mu}g/kg$ wet in Ulleungdo, and $117.7{\pm}18.3{\mu}g/kg$ wet in Hongdo. In addition, total mercury was detected at $414.5{\pm}97.6{\mu}g/kg$ wet in Ulleungdo, $363.9{\pm}123.6{\mu}g/kg$ wet in Hongdo, and $237.5{\pm}42.3{\mu}g/kg$ wet in Baengnyeongdo. Relatively high concentrations of the target pollutants were recorded in specimens from Ulleungdo. Additional comprehensive and prolonged studies are required to elucidate spatial and temporal patterns of contamination in black-tailed gull eggs with regard to monitoring contaminant trends in eggs and prey.

• Journal of Korean Society of Forest Science
• /
• v.80 no.2
• /
• pp.177-186
• /
• 1991

The heavy metal contents accumulated in the birds organ were analyzed by use of 10 species of birds to investigate the environmental pollution of the birds inhabited in Mt. Chiri. Heavy metal concentrations in bird organs, e.g. muscle, liver, kidney, lung and heart were analyzed for 10 species of the birds. 1. Contents of some heavy metal elements such as Fe, Zn, Cu and Mn were similar level compared with any other district. But contents of some heavy metal elements shch as Pb, Cd and Hg were comparatively lower level than those in any other district. 2. The contents of heavy metal accumulation in the muscle of the bird organs were detected much more from the migrants than the resident birds ; the resident bird, Phasianus colchicus were detected to contain $0.01{\mu}g/g$ og Hg and $0.05{\mu}g/g$ of Cd, but in the migrant bird, Turdus dauma they were detected to contain $0.17{\mu}g/g$ of Hg and $0.08{\mu}g/g$ of Cd. 3. The contents of lead were scarcely detected in the muscle of 10 species of birds, but it was highly detected from the hunting (meat-eating) birds such as Phasianus colchicus ($0.17{\mu}g/g$) and Streptopelia orientalis ($0.11{\mu}g/g$). Generally, the concentration of heavy metals of the analyzed birds was more mercury than Cadmium.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2009.11a
• /
• pp.19-20
• /
• 2009

최근 화학, 물리, 생명과학, 전기, 전자등의 다양한 분야에 활발하게 연구가 이루어지고 있는 초분자 화학은 선택적 분자인지를 위한 효율적인 골격구조와 나아가 다양한 계에 응용할 수 있다. 초분자 화학의 분자인지 과정의 특징은 일반적으로 수용체 (receptor 혹은 host)가 목표가 되는 기질 (substrate, analyte, 혹은 guest)에 대하여 선택적으로 식별하고 반응하는 것이다. 비공유 결합성 상호작용에 의하여 이루어지는 초분자 화학의 분자 인지 과정의 특징은 일반적으로 수용체 (receptor 혹은 host)가 목표가 되는 기질 (substrate, analyte, 혹은 guest)에 대하여 선택적으로 식별하고 반응하는 것이다. 이는 공유결합을 이용하는 분자화학과는 차별화 된 것이다. 수용체는 간단한 구조의 화합물 및 금속 이온들과 같은 기질과 가역적으로 상호 작용할 수 있는 착물을 형성한다. 최근들어 급격한 산업화가 진행되어 환경문제가 심각하게 대두 되어져 왔고, 그 중에서 특히 수은이나 카드뮴에 의한 질병, 납에 의한 중독 등 중금속에 의한 오염이 크게 나타남에도 불구하고, 현재 그러한 중금속을 검출함에 있어 많은 비용과 시간이 드는 문제점이 있다. 또한 우리에게 이로운 금속은 효율적 분석을 통해 환경계와 의료계에 많은 도움을 줄 것으로 사례되므로 화학센서 기술의 개발은 절실히 요구되어지고 있다. 이에 새로운 1,3-bisdicyanovinylindane 을 통해 $Hg^{2+}$ 금속의 감지 여부 알아보고, 그 특성을 파악하고자 한다. 1,3-indandion (2.18g, 14.9mmol), malononitrile (2.95g, 44.7mmol), ethanol 50ml를 20분간 상온에서 용해시킨다. 후에 sodium trihydrate acetate(3.05g)을 첨가한 후 5시간 동안 환류반응 시킨다. 이 과정에서 얻어진 용액을 필터과정을 통하여 에서 합성 반응 중에 생성된 불순물(1,3-dicyanovinylindane-1-one, monocondensation)을 제거한다. 필터과정을 통해 걸러진 미 반응 물질을 제�G 용반응욕액을 증류수(100ml)를 이용하여 희석시키고 난 후 염산을 이용, 산성화 시켜 고체 생성물을 얻어낸다. 이렇게 생성된 고체 생성물은 다시 필터 및 건조를 통하여 회색의 고체 화합물을 얻어낸다. 1,3-bisdicyanovinylindane과 금속이온에 대한 감응도를 확인하기 위하여 metanol/water(1:2)을 용매로 하여 금속이온의 농도를 변화시켜 발색특성을 살펴보았다. 본 색소화합물과 Hg2+에 대한 UV 흡광도 변화 적정결과와 그 화합물의 상태 살펴본 결과 금속이온이 0.2ml씩 더 참가되면서 색의 변화를 뚜렷하게 나타내었다. 반면 그 밖에 이온($Fe^{3+}$, $Ag^{2+}$, $Pd^{2+}$, $Zn^2$, $Fe^{2+}$, $Cu^{2+}$, $Pb^{2+}$)은 UV 흡광도 변화가 적거나 변화 자체가 없었다. 하지만 과량의 $Fe^{3+}$, $Ag^{2+}$, $Pd^{2+}$는 색상 변화를 나타내었으며,이와 같은 흡광도 변화는 금속에 따라 약간의 차이가 있지만, 420nm를 등흡수점으로 하여, 580nm의 파장 영역에 있는 흡수 밴드의 세기는 감소하는 반면 400nm 파장 영역에 있는 흡수 밴드의 세기가 증가하였다. 1,3-bisdicyanovinylindane 화합물은 다양한 생물계 및 환경계에서 요구되는 micro mol에서 milli mol 농도 영역의 $Hg^{2+}$ 이온의 선택적이고 민감한 검출과 정량적인 분석에 유용하게 사용될 수 있을 것이다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.15 no.2
• /
• pp.144-147
• /
• 1986

This research is to investigate the changes in Mercury content of fishes, washed with times by the flowing water or immersed into the acetic acid solutions with different densities (1%, 3% and 5%), after contaminating them artificially on purpose, in the solutions with inorganic mercury. The results were summarized as follow: 1. Average values of mercury content in sand-fish and sardine, as a dried ones, which had not been treated by the mercurial solutions, were 0.027 ppm and 0.020 ppm, respectively. 2. According to the changes, with times, in contained by the flowing water, after immersed into 1 ppm $HgCl_2$ solution for 24 hours, The sand-fish washed for 9 minutes had the least of Mercury, which is about 25% of contained quantity of Mercury of those not cleansed. While the sardines cleansed for 3 minutes had the least of Mercury, which is about 77% of contained quantity of Mercury of those not cleansed. 3. According to the changes in contained quantity of the samples treated by the acetic acid solutions with different densities, the sand-fish treated by 3% acetic acid solution had the least value of remains, which was reduced by 64%, in comparision with that of fish cleansed for 1 minute, while the sardines, treated by 1% acetic acid solution had the least amount of remains, which was reduced by 16% in comparision with that of fish, cleansed for 1 minute.

• Clean Technology
• /
• v.28 no.4
• /
• pp.323-330
• /
• 2022

Microfluidic paper-based analytical devices (μPADs) have recently been in the spotlight for their applicability in point-of-care diagnostics and environmental material detection. This study presents a double-sided printing method for fabricating 3D-μPADs, providing simple and cost effective metal ion detection. The design of the 3D-μPAD was made into an acryl stamp by laser cutting and then coating it with a thin layer of PDMS using the spin-coating method. This fabricated stamp was used to form the 3D structure of the hydrophobic barrier through a double-sided contact printing method. The fabrication of the 3D hydrophobic barrier within a single sheet was optimized by controlling the spin-coating rate, reagent ratio and contacting time. The optimal conditions were found by analyzing the area change of the PDMS hydrophobic barrier and hydrophilic channel using ink with chromatography paper. Using the fabricated 3D-μPAD under optimized conditions, Ni²⁺, Cu²⁺, Hg²⁺, and pH were detected at different concentrations and displayed with color intensity in grayscale for quantitative analysis using ImageJ. This study demonstrated that a 3D-μPAD biosensor can be applied to detect metal ions without special analysis equipment. This 3D-μPAD provides a highly portable and rapid on-site monitoring platform for detecting multiple heavy metal ions with extremely high repeatability, which is useful for resource-limited areas and developing countries.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.4
• /
• pp.145-152
• /
• 2023

The average Nusselt numbers in the source and crystal region for the variation of thermal Grashof number (Gr_t) in the range of 2.31 × 10⁴ ≤ Gr_t ≤ 4.68 × 10⁴ are obtained through numerical simulations. It is shown the average Nusselt number in the crystal region is more than twice as large as the average Nusselt number in the source region. The average Nusselt number in the source region shows an increasing tendency with increasing the thermal Grashof number, Gr_t, while the average Nusselt number in the crystal region shows a decreasing tendency with increasing thermal Grashof number, Gr_t. For the variation of the solutal Grashof number (Gr_s) in the ran ge of 3.28 × 10⁵ ≤ Gr_s ≤ 4.43 × 10⁵, the average Sherwood number in the source region and crystal region tends to decrease as the solutal Grashof number, Gr_s increases. The average Sherwood number in the crystal region is about four times greater than the average Sherwood number in the source region.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.4
• /
• pp.510-520
• /
• 2021

To understand the status of organic matter and heavy metal pollution in surface sediment of a fish farming area, we have measured the concentrations of total organic carbon (TOC), total nitrogen (TN), and heavy metals (As, Cd, Cr, Cu, Fe, Hg, Mn, Pb, and Zn) in surface sediments of a fish farming area near Tongyoung-Geoje coast. The mean concentrations of TOC and TN were 22.7 mg/g and 3.4 mg/g, respectively, and were much higher than those in surface sediments of a semi-enclosed bay in the southern coast of Korea. The mean concentrations of As, Cd, Cr, Cu, Fe, Hg, Mn, Pb, and Zn were 10.5 mg/kg, 0.37 mg/kg, 82.9 mg/kg, 127 mg/kg, 4.19%, 0.041 mg/kg, 596 mg/kg, 39.5 mg/kg, and 175 mg/kg, respectively, and the mean concentrations of Cd and Cu were three times higher than those in surface sediments of shellfish farming area in the southeastern coast of Korea. In addition, the concentrations of TOC and corrected Cu exceeded the values of sediment quality guidelines applied in Korea, and pollution load index (PLI) and ecological risk index (ERI) showed that the metal concentrations in the sediments of some fish farming area have a strongly negative ecological impact on benthic organisms, although most metal concentrations did not exceed the sediment quality guidelines. Based on overall assessment results, the surface sediments of fish farming areas in the study region are polluted with organic matter and some heavy metals. Thus, a comprehensive management plan is necessary to improve the sedimentary environments, identify primary contamination sources, and reduce the input of pollution load for organic matter and heavy metals in the sediments of fish farming areas.