• Journal of the Korean Wood Science and Technology
• /
• v.37 no.3
• /
• pp.255-264
• /
• 2009

To evaluate the effects of chemical pretreatments of lignocellulosic biomass on enzymatic hydrolysis process, Populus euramericana was pretreated for 1 hr with 1% sulfuric acid ($H_2SO_4$) at $150^{\circ}C$ and 1% sodium hydroxide (NaOH) at $160^{\circ}C$, respectively. Before the enzymatic hydrolysis, each pretreated sample was subjected to drying process and thus finally divided into four subgroups; dried or non-dried acid pretreated samples and dried or non-dried alkali pretreated samples and chemical and physical properties of them were analyzed. Biomass degradation by acid pretreatment was determined to 6% higher compared to alkali pretreatment. By the action of acid ca. 24.5% of biomass was dissolved into solution, while alkali degraded ca. 18.6% of biomass. However, reverse results were observed in delignification rates, in which alkali pretreatment released 2% more lignin fragment from biomass to the solution than acid pretreatment. Unexpectedly, samples after both pretreatments were determined to somewhat higher crystallinity than untreated samples. This result may be explained by selective disrupture of amorphous region in cellulose during pretreatments, thus the cellulose crystallinity seems to be accumulated in the pretreated samples. SEM images revealed that pretreated samples showed relative rough and partly cracked surfaces due to the decomposition of components, but the image of acid pretreated samples which were dried was similar to that of the control. In pore size distribution, dried acid pretreated samples were similar to the control, while that in alkali pretreated samples was gradually increased as pore diameter increased. The pore volume which increased by acid pretreatment rapidly decreased by drying process. Alkali pretreatment was much more effective on enzymatic digestibility than acid pretreatment. The sample after alkali pretreatment was enzymatically hydrolyzed up to 45.8%, while only 26.9% of acid pretreated sample was digested at the same condition. The high digestibility of the sample was also influenced to the yields of monomeric sugars during enzymatic hydrolysis. In addition, drying process of pretreated samples affected detrimentally not only to digestibility but also to the yields of monomeric sugars.

• Korean journal of food and cookery science
• /
• v.27 no.5
• /
• pp.557-565
• /
• 2011

The objectives of this study were to investigate the physicochemical characteristics of soybean leaves in different cultivars and to develop a soybean curd prepared with soybean leave powder as a functional food. Four cultivars (Daewonkong leaf, Daepungkong leaf, Hwangguemkong leaf, and Seoritae leaf) were selected for this experiment. A significant difference was observed in the proximate composition of soybeans leaves (p<0.05). Soybean leaves had the highest content of carbohydrates. The mineral composition and isoflavone content in soybean leaves were significantly different among the cultivars (p<0.05). In particular, Daepongkong leaf had the highest content of genistein, daidzein, and total isoflavones. This study was also conducted to determine the quality characteristics of a soybean curd developed from daepongkong leaf with various concentrations (0, 0.1, 0.2, and 0.3%) of soybean leaf powder (SLP). The soybean curd yield rate increased according to the level of SLP added, whereas the L and a color values decreased. In the sensory evaluation, intensity scores for color, after taste, leafy taste, and chewiness were highest for the 0.3% soybean curd. The soybean curd with 0.2% SLP soybean milk attained the highest overall acceptability score. These results showed that soybean leaf was preferred over soybean curd containing 0.2% soybean leaf powder.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.18 no.4
• /
• pp.357-365
• /
• 2016

The effects of elevated atmospheric $CO_2$ on photosynthesis and growth of Chinese cabbage (Brassica campestris subsp. napus var. pekinensis) were investigated to predict productivity in highland cropping in an environment where $CO_2$ levels are increasing. Vegetative growth, based on fresh weight of the aerial part, and leaf characteristics (number, area, length, and width) of Chinese cabbage grown for 5 weeks, increased significantly under elevated $CO_2$ ($800{\mu}mol{\cdot}mol^{-1}$) compared to ambient $CO_2$ ($400{\mu}mol{\cdot}mol^{-1}$). The photosynthetic rate (A), stomatal conductance ($g_s$), and water use efficiency (WUE) increased, although the transpiration rate (E) decreased, under elevated atmospheric $CO_2$. The photosynthetic light-response parameters, the maximum photosynthetic rate ($A_{max}$) and apparent quantum yield (${\varphi}$), were higher at elevated $CO_2$ than at ambient $CO_2$, while the light compensation point ($Q_{comp}$) was lower at elevated $CO_2$. In particular, the maximum photosynthetic rate ($A_{max}$) was higher at elevated $CO_2$ by 2.2-fold than at ambient $CO_2$. However, the photosynthetic $CO_2$-response parameters such as light respiration rate ($R_p$), maximum Rubisco carboxylation efficiency ($V_{cmax}$), and $CO_2$ compensation point (CCP) were less responsive to elevated $CO_2$ relative to the light-response parameters. The photochemical efficiency parameters ($F_v/F_m$, $F_v/F_o$) of PSII were not significantly affected by elevated $CO_2$, suggesting that elevated atmospheric $CO_2$ will not reduce the photosynthetic efficiency of Chinese cabbage in highland cropping. The optimal temperature for photosynthesis shifted significantly by about $2^{\circ}C$ under elevated $CO_2$. Above the optimal temperature, the photosynthetic rate (A) decreased and the dark respiration rate ($R_d$) increased as the temperature increased. These findings indicate that future increases in $CO_2$ will favor the growth of Chinese cabbage on highland cropping, and its productivity will increase due to the increase in photosynthetic affinity for light rather than $CO_2$.

• Journal of Dairy Science and Biotechnology
• /
• v.14 no.2
• /
• pp.157-164
• /
• 1996

This study aimed increase the quality during ripening of Cheddar cheese made with proteinase-negative mutant of Streptococcus lactis KCTC 1913 selected by curing. The degradation of protein during cheese ripening were investigated by electrophoresis and chromatography. The results were summarized as follow ; 1. The number of lactic acid bacteria decreased with the ripening stage, and that of the control cheese decreased faster than that of the cheese made with mutant. 2. Polyacrylamide gel electrophoretic analysis of cheese caseins revealed no difference between the cheese made with mutant and the control cheese, but differences along with the ripening stage were evident. 3. On Sephadex G-25 column chromatography, the extracts of bitter components from the green cheese and 3 month ripended cheese were fractionated into 3 fractions. With the progress of ripening, bitter peptides were degraded to rather small peptides or free amino acids. 4. Sensory evaluation of the 3 month ripended Cheddar cheese found no significant differences in color but the cheese made with mutant evidenced higher palatability in flavor and better texture than the control cheese. 5. The yields of the cheddar cheese made with mutant was 0.14% higher than that of the control cheese.

• Proceedings of the Korean Society of Life Science Conference
• /
• 2002.05a
• /
• pp.17-22
• /
• 2002

지구상에는 수천종의 버섯류가 자생하고 있어 유전자원으로서의 중요성이 지대할 뿐만 아니라 기능성 식품소재 및 각종 약리 활성을 나타내는 신약개발 소재로도 크게 주목을 받고 있다. 이들 버섯은 균사체의 영양대사로 얻어지는 대사산물이 축적된 자실체의 형태로 나타나는데, 최근에 와서 자실체 및 균사체의 추출물이나 균사체 배양물이 체질개선이나 각종 병의 예방과 치료에 효과가 있는 것으로 밝혀져 건강식품이나 의약품으로서의 용도가 크게 증가하고 있는 실정이다. 특히, 담자균이 생산하는 특정 구조를 갖는 다당류는 오래전부터 종래의 화학요법제와는 달리 숙주내의 면역 기능을 부활하여 소위 면역요법제로서의 항암효과를 나타냄이 알려져왔었다. 현재까지 제약 및 의학적인 방법이 질병의 주된 치료방법으로 이용되어 왔지만 최근에 특정식품의 섭취가 만성질환의 발생을 억제 또는 지연시킨다는 연구 보고가 나오면서부터 만성질환의 치료방법으로서 식이요법을 중요하게 생각하게 되었다. 따라서 새로운 식품소재 및 가공식품의 개발을 통한 성인병 등의 각종 질병예방이 국민보건문제 해결에 필수적이다. 현재 일본 등에서는 표고버섯, 구름버섯 및 치마버섯 유래의 다당체 또는 단백다당체인 lentinan, krestin 또는 PS-K, schizophyllan 및 PSP 등이 실용화되어 높은 가격에 판매되고 있다. 국내에서도 야생 구름버섯 자실체로부터 추출한 단백 다당체인 Copolang(광동제약)이 개발되어 PS-K와 유사하게 암의 치료에 병행 사용되고 있고, 또 강력한 항암활성이 보고된 상황버섯의 균사체 추출물인 단백 다당체가 Mesima-Ex FK(한국신약)라는 상품명으로 암의 치료에 병행 사용되고 있는 것으로 알려지고 있다. 담자균류와 아울러 미생물 유래 다당체는 그 구조와 특성에 있어서 매우 다양함을 지니고 있다. 이러한 미생물 유래 다당류의 공업적 생산과 이용에 대한 연구로서는 Leuconostoc mesenteroides가 생산하는 dextran이 혈장증량제로 개발된 이래 Xanthomonas campestris가 생산하는 pullulan, Zoogloea rgmigera가 생산하는zooglan둥이 대표적인 예로 보고되고 있다. 한편, 미생물 유래 다당류는 구성당, 분자량, 화학적 구조 등과 같은 특성의 차이에 의해 많은 종류가 존재하고 있으며, 다양한 물성 및 유화제, 응고제, gel 형성제, 필름 형성제, 흡착제, 안정제, 접착제 등과 같은 용도로 광범위하게 이용되고 있다. 또한 근래에 들어서는 미생물 유래 다당체가 지니는 항암활성이 확인되어 새로운 의약품으로서의 개발 가능성이 기대된다. 그 밖에도 기존에 알려져 있는 식물 및 해조류 유래의 다당체와는 달리, 발효조를 이용한 연속배양에 의해 공업적 대량 생산이 가능하며, 더욱이 생산된 다당체의 분리 및 회수가 용이하다는 이점을 지니고 있다. 최근에 들어서는 유전공학적 기법을이용한 고생산성 변이균주 및 새로운 기능을 지닌 다당체의 개발에 관한 연구가 보고되고 있는 등 고부가가치를 지닌 새로운 바이오 소재로서의 기능 및 용도 개발에 관한 연구가 활발히 진행되고 있다. 이러한 항암 활성을 나타내는 여러 가지 담자균류중 Agaricus blazei로부터 생산되는 다당체는 고형암 이외에 S형 결장암, 난소암, 유방암, 폐암, 간암 등에 효과가 입증되었고, 천연물질에 의한 암 면역요법으로 각광을 받고 있으며, 항암 및 항virus의 완치율과 저지율에서 현재 여러가지 약효가 있는 버섯중에서도 탁원한 효과가 있는 것으로 증명되고 있다. 이들 다당체는 사이토카인을 생산시켜서 T임파구와 B임파구의 항원 특이적인 면역반응을 활성화시키고, 세포장해성 T세포와 활성화 대식세포의 세포장해 기능을 충진시켜서 암세포를 파괴시킨다. 또한 콜로니 자극인자인 사이토카인을 생산시켜서 면역담당세포의 신생을 촉진시키기도 하며, 암의 화학요법과 방사선 요법으로 저하된 백혈구를 회복시키는 역할을 한다. 따라서 최근의 연구동향은 생산된 다당체의 항암활성을 향상시키고자 하여 배양기간중에 interleukin을 의도적으로 첨가하는 경향이 있다. 이러한 항암 활성을 나타내는 담자균체 유래 다당체는 버섯의 기원에 따라 그 형태에 약간의 차이를 나타내기는 하나 그 기본 형태는 ${\beta}-(1,6)-glucosyl$ 분지를 가진 ${\beta}-(1,3)-glucan$이며, 평균 분자량은 50 ${\sim}$ 200만 정도이다. Agaricus blazei의 원산지인 브라질의 피에다데(Piedade) 지방의 환경조건(산지의 습도는 80%, 낮 기온 $35^{\circ)C$, 밤 기온 $20{\sim}25^{\circ}C$로 대단히 높으며, 정기적으로 열대지방 특유의 소나기가 내리는 지역)에서 볼 수 있듯이 Agaricus blazei의 성장 환경은 매우 까다로운 편이며, 날것으로는 보관이 잘 안되기 때문에 그 재배에 큰 어려움이 있다. 또한, 고체배양에 의해 생산된 버섯 자실체로부터 유기용매 및 열수추출 방법으로 다당체를 생산하는 방법은 균일한 형태의 버섯 자실체를 공급받기가 어렵기 때문에 다당체의 생산 수율이 낮고, 많은 노동력이 요구되는 어려움이 있다. 그러나 액체배양에 의한 다당체 생산의 경우는 고체배양에 의한 다당체 생산에 비해 일정한 조건하에서 배양이 가능하다는 장점이 있으며, 항상 균일한 균사체 및 배양액을 얻을 수 있다. 따라서 원하는 유용물질을 쉽게 획득할 수 있는 장점이 있다.

• Clean Technology
• /
• v.28 no.4
• /
• pp.269-277
• /
• 2022

With the recent development of the biological enzymatic reaction industry, lactic acid (LA) can be mass-produced from biomass sources. In particular, a catalytic process that converts LA into acrylic acid (AA) is receiving much attention because AA is used widely in the petrochemical industry as a monomer for superabsorbent polymers (SAP) and as an adhesive for displays. In the LA conversion process, NaY zeolites have been previously shown to be a high-activity catalyst, which improves AA selectivity and long-term stability. However, NaY zeolites suffer from fast deactivation due to severe coking. Therefore, the aim of this study is to modify the acid-base properties of the NaY zeolite to address this shortcoming. First, base promoters, Ca ions, were introduced to the NaY zeolites to tune their acidity and basicity via ion exchange (IE) and incipient wetness impregnation (IWI). The IWI method showed superior catalyst selectivity and stability compared to the IE method, maintaining a high AA yield of approximately 40% during the 16 h reaction. Based on the NH₃- and CO₂-TPD results, the calcium salts that impregnated into the NaY zeolites were proposed to exit as an oxide form mainly at the exterior surface of NaY and act as additional base sites to promote the dehydration of LA to AA. The NaY zeolites were further treated with KOH before calcium impregnation to reduce the total acidity and improve the dispersion of calcium through the mesopores formed by KOH-induced desilication. However, this KOH treatment did not lead to enhanced AA selectivity. Finally, calcium loading was increased from 1wt% to 5wt% to maximize the amount of base sites. The increased basicity improved the AA selectivity substantially to 65% at 100% conversion while maintaining high activity during a 24 h reaction. Our results suggest that controlling the basicity of the catalyst is key to obtaining high AA selectivity and high catalyst stability.

• Resources Recycling
• /
• v.32 no.1
• /
• pp.50-59
• /
• 2023

The amount of dust generated during the dissolution of scrap in an electric arc furnace is approximately 1.5% of the scrap metal input, and it is primarily collected in a bag filter. Electric arc furnace dust primarily consists of zinc and ion. The processing of zinc starts with its conversion into pellet form by the addition of a carbon-based reducing agent(coke, anthracite) and limestone (C/S control). These pellets then undergo reduction, volatilization, and re-oxidation in rotary kiln or RHF reactor to recover crude zinc oxide (60%w/w). Next, iron is discharged from the electric arc furnace dust as a solid called Fe clinker (secondary by-product of the Fe-base). Several methods are then used to treat the Fe clinker, which vary depending on the country, including landfilling and recycling (e.g., subbase course material, aggregate for concrete, Fe-source for cement manufacturing). However, landfilling has several drawbacks, including environmental pollution due to leaching, high landfill costs, and wastage of iron resources. To improve Fe recovery in the clinker, we pulverized it into optimal -sized particles and employed specific gravity and magnetic force selection methods to isolate this metal. A carbon-based reducing agent and a binding material were added to the separated coarse powder (>10㎛) to prepare briquette clinker. A small amount (1-3%w/w) of the briquette clinker was charged with the scrap in an electric arc furnace to evaluate its feasibility as an additives (carbonaceous material, heat-generating material, and Fe source).

• Journal of Food Hygiene and Safety
• /
• v.38 no.6
• /
• pp.517-527
• /
• 2023

This study aimed to examine the possibility of upcycling extracts of Angelica keiskei and Oenanthe javanica juice by-products through comparing enzyme extraction (EE) and complex extraction (CE) methods to increase the extraction yield and flavor of materials. A higher extraction yield was obtained for free amino acid content with EE and CE for A. keiskei and O. javanica juice by-products, respectively, and a higher extraction efficiency was achieved with juice by-products than with extracts prepared from raw materials before juice production. The content of major amino acids varied depending on the extraction method used. When used according to the characteristics of the extract, their use as a functional material was confirmed along with improvement in the flavor of the food. Consistently high extraction yields for organic acid and sugar levels were obtained with CE in A. keiskei and O. javanica juice by-products. The DPPH radical scavenging ability and TPC were consistently high with CE in A. keiskei and O. javanica juice by-products; the increase in extracted content was likely because of the reaction between the ethanol used for CE and the phenolic compounds. However, because the antioxidant capacity of the juice by-product extracts was somewhat lower than that of the extracts from raw materials before juice production, the amount used should be reviewed. The TFC was found to be higher in extracts obtained with EE than with CE for A. keiskei juice by-products; however, no significant difference was observed between EE and CE in the O. javanica juice by-products. Through this study, the taste compounds and antioxidant properties of extracts obtained from juice by-products produced after the production of A. keiskei and O. javanica green juice were analyzed, and the availability of high value-added materials was confirmed. Based on these research results, expanding specific R&D for practical use should be explored.

• Korean Journal of Poultry Science
• /
• v.51 no.1
• /
• pp.11-19
• /
• 2024

This study was conducted to evaluate the potential of using laying hens as meat type chickens. Male broiler (Ross 308, R3), laying hens (Hy-Line Brown, HL), and Korean native chickens (Hanhyup-3, H3) were used, and 100 heads of each were prepared. Carcass characteristics, meat quality, and sensory quality characteristics were compared as analysis items. The rearing environment and feed for all treatments were identical to the broiler rearing manual, and the lighting system was maintained at 23L:1D. Feed and water were provided ad libitum. The test ended when the average weight of each treatment group reached 1.5 kg, and individuals of similar weight were randomly selected and compared. As a result of this study, the live weight of the selected individuals was approximately 1.5 kg, which was similar for all treatments (P>0.05). However, carcass weight and ratio and breast meat production were highest in R3, while HL had higher ratios of legs, wings, and neck (P<0.05). The H3 group showed high pH and WHC levels and low cooking loss, and R3 improved chicken meat color (P<0.05). In particular, the fat content in meat was lowest in HL (P<0.01). Nucleic acid substances ATP, Hx, ADP, AMP, and INO were abundant in R3, and IMP content was highest in HL (P<0.05). In sensory evaluation, all treatments showed similar characteristics and overall preferences (P>0.05). Based on the findings, it appears that HL, a male laying hen, produces meat with unique characteristics such as low fat content and high IMP content.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.22 no.2
• /
• pp.67-73
• /
• 2018

$[^{11}C]PIB$ synthesis has been performed by a loop-methylation and HPLC purification in our lab. However, this method is time-consuming and requires complicated systems. Thus, we developed an on-cartridge method which simplified the synthetic procedure and reduced time greatly by removing HPLC purification step. We compared 6 different cartridges and evaluated the $[^{11}C]PIB$ production yields and specific activities. $[^{11}C]MeOTf$ was synthesized by using TRACERlab FXC Pro and was transferred into the cartridge by blowing with helium gas for 3 min. To remove byproducts and impurities, cartridges were washed out by 20 mL of 30% EtOH in 0.5 M $NaH_2PO_4$ solution (pH 5.1) and 10 mL of distilled water. And then, $[^{11}C]PIB$ was eluted by 5 mL of 30% EtOH in 0.5 M $NaH_2PO_4$ into the collecting vial containing 10 mL saline. Among the 6 cartridges, only tC18 environmental cartridge could remove impurities and byproducts from $[^{11}C]PIB$ completely and showed higher specific activity than traditional HPLC purification method. This method took only 8 ~ 9 min from methylation to formulation. For the tC18 environmental cartridge and conventional HPLC loop methods, the radiochemical yields were $12.3{\pm}2.2%$ and $13.9{\pm}4.4%$, respectively, and the molar activities were $420.6{\pm}20.4GBq/{\mu}mol$ (n=3) and $78.7{\pm}39.7GBq/{\mu}mol$ (n=41), respectively. We successfully developed a facile on-cartridge methylation method for $[^{11}C]PIB$ synthesis which enabled the procedure more simple and rapid, and showed higher molar radio-activity than HPLC purification method.