• Economic and Environmental Geology
• /
• v.36 no.3
• /
• pp.149-157
• /
• 2003

Deep sea core samples were taken in the southwestern part of the Ulleung Basin in order to characterize the properties of shallow gases in the sediment. Amount of shallow gases in the sediments were calculated by head space techniques, and chemical and isotopic compositions of hydrocarbon gases were analyzed. Geochemical analyses were carried out on the gas bearing sediments to find out relationship between natural gas contents and organic characteristics of the sediments. Seismic characteristics of shallow gases in the sediments were also examined in this study. The amount of the hydrocarbon gases in the sediments range from 0.01% to 11.25%. Calculation of volume of gas per volume of wet sediment varies from 0.1 to 82.0 ml HC/L wet sediment. Methane consists 98% of the total hydrocarbon gases except for two samples. Based on the methane content and isotopic composition$(\delta^{13}c)$: -94.31$\textperthousand$~-55.5$\textperthousand$), the hydrocarbon gases from the sediments are generated from bacterial activities of methanogenic microbes. Contents of hydrocarbon gases are variable from site to site. Volume of shallow gases in the sediments shows no apparent trends vs. either characteristics of organic matter or particle sizes of the sediments. Gas concentration is high in the area of seismic anomalies such as blanking zone or chimney structures in the section. Physicochemically the pore water and the formation water systems are saturated with gases in these areas. Concentration of hydrocarbon gases in the sediments in these area shows favorable condition for generation of gas hydrate, as far as the other conditions are satisfied.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.141-141
• /
• 2011

DLC(Diamond Like Carbon) 박막은 높은 경도, 낮은 마찰계수, 내화학성 등의 우수한 트라이볼로지적 특성을 가지고 있기 때문에 다양한 산업분야에서 적용되고 있다. 이러한 DLC 박막은 합성기구나 구조의 관점에서 몇 가지 다른 이름으로 불려지기도 한다. 밀도와 경도가 높기 때문에 경질탄소(Hard Carbon)라고도 불려지며, 수소를 함유한 경우에는 수소함유 비정질 탄소(Hydrogenated Amorphous Carbon)이라는 이름이 사용되며, 고밀도 탄소(Dense Carbon) 또는 고밀도 탄화수소(Dense Hydrocarbon)라고 불리기도 한다. 이렇듯 DLC 박막은 합성방법에 따라 함유된 수소와 탄소의 결합구조의 차이가 있다. 수소 함유한 DLC 박막은 20~50%까지 수소를 함유하며, DLC막의 기계적, 광학적, 전기적 특성들이 수소함량과 밀접한 관계를 가지고 있는 것으로 알려져 있다. 그러나 함유된 수소가 $300^{\circ}C$ 이상의 온도에서는 쉽게 결합에서 이탈되면서 흑연화와 더불어 마찰마모시 코팅층의 파손이 발생한다고 보고되고 있고, 또한 수소량이 증가함에 따라 DLC 박막의 경도는 감소하게 되는데, 이는 수소에 의해 dangling bond가 Passivation되면 탄화수소의 3차원적인 Crosslinking은 그만큼 감소하게 되기 때문이라고 알려져 있다. 본 연구에서는 PECVD를 이용하여 여러 가지 공정에 따른 DLC 박막을 증착시켰으며, 수소함유량에 따른 DLC막의 구조와 그에 따른 경도 변화를 살펴보았다. FTIR(Furier Transform Infrared Spectroscopy)과 Raman Spectroscopy을 이용하여 DLC막의 수소의 결합상태를 관찰하였으며, Nano Indentation을 사용하여 미소경도를 측정하였고, FE-SEM을 이용하여 표면과 단면을 관찰하였다. 막의 두께 측정에는 ${\alpha}$-Step을 사용하였으며, Ball-on-Disk 타입의 Tribo-meter을 이용하여, 모재의 경도에 따른 마찰계수 변화를 관찰하였다.

• Membrane Journal
• /
• v.23 no.4
• /
• pp.290-296
• /
• 2013

Poly(vinylidenefluoride-co-chlorotrifluoroethylene) P(VDF-co-CTFE) polymer was attached to methacrylic acid (MAA) in the presence of 1,8-diazabicyclo[5,4,0]undec-7-ene(DBU) catalyst to prepare P(VDF-co-CTFE)-MAA copolymer. The modified P(VDF-co-CTFE)-MAA was polymerized with 2-sulfoethyl methacrylate (SEMA) monomer in the presence of 4',4'-azobis(4-cyanovaleric acid(ACVA) initiator by free radical polymerization to form the proton conducting membrane. The ratio of the SEMA was increased in the membrane to increase the presence of the acidic group. The maximum IEC value that was observed at 50% SEMA was around 0.82 meq/g, which is consistent with the water uptake value. The highest proton conductivity achieved by P(VDF-co-CTFE)-MAA/SEMA membrane with 50% SEMA was approximately 0.041 S/cm. This indicates that the available ionic group for the proton conduction increases with the increase in the SEMA in the membrane.

• KSBB Journal
• /
• v.20 no.6
• /
• pp.393-400
• /
• 2005

Hydrogen($H_2$) as a clean, and renewable energy carrier will be served an important role in the future energy economy. Several biological $H_2$ production processes are known and currently under development, ranging from direct bio-photolysis of water by green algae, indirect bio-photolysis by cyanobacteria including the separated two stage photolysis using the combination of green algae and photosynthetic microorganisms or green algae alone, dark anaerobic fermentation by fermentative bacteria, photo-fermentation by purple bacteria, and water gas shift reaction by photosynthetic or fermentative bacteria. In this paper, biological $H_2$ production processes, that are being explored in fundamental and applied research, are reviewed.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.10
• /
• pp.672-678
• /
• 2014

In this study, variations of fermentative hydrogen production and microbial community were investigated with different nitrogen concentration of food waste. Optimum hydrogen production rate was acquired at 200 mg/L nitrogen concentration of the food waste. Which was eqivalent to 83.43 mL/g dry biomass/hr. However, bio-hydrogen production was inhibitedly reduced at over 600 mg/L of nitrogen concentration whereas proportional relation between hydrogen production and B/A ratio were not observed. Most dominant specie of the microbial community analyzed was Clostridium sp. throughout PCR-DGGE analysis of 16S rDNA. It revealed that most contributing microorganism producing hydrogen were Enterococcus faecium partial, Klebsiella pneumoniae strain ND6, Enterobacter sp. NCCP-231, and Clostridium algidicarnis strain E107 in this experiment.

• Research in Plant Disease
• /
• v.16 no.1
• /
• pp.81-85
• /
• 2010

Arabidopsis seedlings subjected to low pH stress in the range of pH 5.6-4.0 did not show significant retardations in root and shoot growths. Treatment of pH 3.5-2.5 resulted in significant reductions in root and shoot length, especially in roots. Chlorophyll contents in seedlings increased during acid treatment of pH 5.6-4.0, but decreased by stronger acid treatment of pH 4.0 and lower pHs. Total carotenoid contents showed similar trend to chlorophyll contents by increasing during pH 5.6-3.5 treatments and decreasing by pH 3.0-2.5. Anthocyanin contents increased under acid stress of pH 5.6-3.0 and showed great reduction at pH 2.5. The ratios of carotenoids/chlorophylls and anthocyanins/chlorophylls increased by acid stress treatments. That indicates plants try to adjust physiologically to acid stress and protect chlorophylls by increasing carotenoid and anthocyanin contents. However, different responses of chlorophylls and anthocyanins to acid stress indicate both pigments play different roles in protecting plant from acid stress.

• Journal of Bio-Environment Control
• /
• v.17 no.4
• /
• pp.273-282
• /
• 2008

The relationship between water deficit stress and monodehydroascorbate reductase (MDHAR) activity was determined in lettuce (Lactuca sativa L.) leaves under water stress condition imposed by with-holding water for 72 hrs. Relative water content determined in water deficit stressed lettuce leaves gradually reduced from 91.29% to 74.58%, and water content of medium drastically decreased 4.73% after quitting of irrigation. Hydrogen peroxide content in leaves subjected to water deficit stress rapidly increased, but soluble protein content rapidly decreased when those were compared to control plant. The relationship between relative water content and hydrogen peroxide content in stressed leaves positively correlated with $R^2$=0.8851, but soluble protein content reversely correlated with $R^2$=0.9826. Total chlorophyll content in stressed plant leaves was higher than that of control plant, and increased rapidly in early stage of treatment of both stressed and control plants. Carotenoid content was higher than that of control plant, and the ratio of carotenoid to total chlorophyll in stressed plant was higher as compared to control plant. As water deficit stress continued progressively, total ascorbate content in stressed plant leaves was a little higher than that of control plant. But dehydroascorbate (DHA) content within 6 hr of water deficit stress was higher than that of control plant, and then, content of control plant in 12 hr of stress treatment higher than that of stressed leaves. The activity of monodehydroascorbate reductase of cytosolic and chloroplastic tractions increased dramatically, and mRNA of MDHAR was highly detected by probing $^{32}P$-labeled single stranded MDHAR RNA of lettuce plant leaves subjected to water deficit stress. Relationship between MDHAR activity and relative water content and hydrogen peroxide highly correlated with $R^2$=0.9937 and 0.8645, respectively.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11a
• /
• pp.151-156
• /
• 1996

수소동위원소 교환반응에 이용되는 스티렌-디비닐벤젠 고분자 촉매 담체를 제조하였다. 중합반응시 일정한 용매계에서 용매/모노머 함량비와 팽윤제/침전제 함량비를 변화시켜 담체의 표면특성에 미치는 영향을 확인하였다. 가교도가 33%일 경우 용매/모노머가 2.0 이하에서 팽윤제/침전제의 함량비가 증가할수록 10~30$\AA$의 반경을 갖는 기공의 분포가 증가하였다. 담체의 열적안정성을 확인하기 위한 열 중량 분석에서는 온도를 일정한 비율로 단시간에 증가시킬 경우에는 담체의 가교도에 관계없이 35$0^{\circ}C$ 근처에서 거의 유사한 degradation을 보였지만 온도를 매우 천천히 증가시켜 장시간 노출시킬 경우 가교도에 따라서 degradation의 정도와 경향이 다르게 나타남을 확인하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.188-188
• /
• 2016

GZO 박막은 상업적으로 사용되는 ITO를 경제적으로 대체할 수 있는 유망한 투명 전도 물질이며, 인체에 무해하고, 공급이 쉬우며, 화학적으로 안정하다. 특히, CIGS와 같은 광전변환 소자 전극에서는 부식 저항이 매우 중요한데, 습한 환경에서 견뎌낼 수 있다는 장점이 있다. GZO는 3가 갈륨이 2가 아연에 도핑된 n타입의 반도체 물질이다. 그리고 육각형의 황화아연 물질의 전기 전도도는 산소 결핍에 매우 의존한다. GZO의 수소는 산소 결핍 집중에 영향을 끼친다. 따라서 이 연구에서는 RF 마그네트론 스퍼터링 실험 동안 수소 함유량을 다양화 시키고, 면 저항, 광 투과도, 부식저항의 효과를 조사한다. 수소량이 증가할수록, 면 저항은 향상되어지고, 특정 지점을 넘으면 감소한다. 분극 실험에 의해 측정되어진 부식 저항은 박막의 미세조직과 결정립계의 특성에 더 의존되어진다. 훨씬 더 많은 수소를 함량한 비정질이 부식 저항성에 있어서 유효한 차이를 나타내지 못하는 동안 결정 내에서 많은 수소를 지닌 작은 결정의 결정립계는 낮은 분극저항, 즉 낮은 부식 저항성의 결과를 도출한다.

• Journal of Korean Ophthalmic Optics Society
• /
• v.3 no.1
• /
• pp.1-8
• /
• 1998

The a-C:H films have been grown on the glass substrate by PECVD mathod, where plasma was generated with a 60Hz line power source. The carbonization is checked from peak intensities of D($sp^3$) and G($sp^2$) peaks in Raman spectra. The hydronization and C-H bonding status in films can also be determined from FTIR results. Both the bonding strength of C-H and the ratio of $sp^3$ to $sp^2$ in bonding are found to be slightly dependent of partial pressure of $C_2H_2$. Judging from above results, we can conclude that the best value for partial pressure of $C_2H_2$ in growing process of thick films is about 15%.