• Korean Chemical Engineering Research
• /
• v.52 no.6
• /
• pp.727-735
• /
• 2014

For improved sustainability of the biorefinery industry, biorefinery-byproduct glycerol is being investigated as an alternate source for hydrogen production. This research designs and optimizes a hydrogen-production process for small hydrogen stations using steam reforming of purified glycerol as the main reaction, replacing existing processes relying on steam methane reforming. Modeling, simulation and optimization using a commercial process simulator are performed for the proposed hydrogen production process from glycerol. The mixture of glycerol and steam are used for making syngas in the reforming process. Then hydrogen are produced from carbon monoxide and steam through the water-gas shift reaction. Finally, hydrogen is separated from carbon dioxide using PSA. This study shows higher yield than former U.S. DOE and Linde studies. Economic evaluations are performed for optimal planning of constructing domestic hydrogen energy infrastructure based on the proposed glycerol-based hydrogen station.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.375-378
• /
• 2002

Hydrogen producing bacterium, strain Ye13-6 was isolated from the sludge of the factory areas in Gunpo through the acclimation in basal salt medium(BSM) supplemented with 10g/ ${\ell}$ of sucrose. Isolated strain Ye13-6 was a facultative anaerobe which could grow in both aerobic and anaerobic environments. Effects of the concentrations of glucose and sucrose on the hydrogen production rate and the hydrogen production yield were investigated. When glucose in the range of 1${\sim}$12g/ ${\ell}$ was supplemented to the BSM, strain Ye13-6 could grow without lag phase. An increased glucose concentration increased the specific hydrogen production rate linearly to 60mmol-$H_2$ ${\cdot}$ mg-$DCW^{-1}$ ${\cdot}$ $h^{-1}$. The hydrogen production yield was maintained over a range from 2.6 to 3.1mol-$H_2$ ${\cdot}$ mol-$glucose^{-1}$. When sucrose in the range of 1${\sim}$12g/ ${\ell}$ was supplemented to the BSM, strain Ye13-6 could grow after ten hours. An increased sucrose concentration increased the specific hydrogen production rate and the hydrogen production yield to 163mmol-$H_2$ ${\cdot}$ mg-$DCW^{-1}$ ${\cdot}$ $h^{-1}$ and to 4.5mol-$H_2$ ${\cdot}$ mol-$sucrose^{-1}$, respectively.

• Microbiology and Biotechnology Letters
• /
• v.17 no.5
• /
• pp.421-428
• /
• 1989

A soil bacterium synthesizing an extremely viscous biopolymer was isolated and identified as Pseudomonas delafieldii. The optimal pH and temperature for the growth were 6.5 and 3$0^{\circ}C$, respectively. Maximum specific growth rate was 0.24 h$^{-1}$. The specific polysaccharide productivity, growth yield and product yield were 6.25 mg/g-cell/h, 54.5% and 38.39%, respectively. The polysaccharide was presumed to be $\beta$-glucan containing glucose and gluconolactone (1.9：1.0 in molar ratio) and 1.35 % acetyl group, Element analysis showed that it contained carbon (31.85%) and hydrogen (5.15%). The weight average molecular weight by GPC was 5.64$\times$10$^7$. The intrinsic viscosity was 42.84 dl/g.

• Transactions of the Korean hydrogen and new energy society
• /
• v.12 no.4
• /
• pp.293-305
• /
• 2001

최근 디젤 대체 연료 및 발전용 연료로서 그 가능성을 인정받고 있는 DME(dimethyl ether, $CH_{3}OCH_{3}$)를 이용하여 수소를 생산하는 방법으로 DME 수증기 개질반응의 기초 실험을 수행하였다. DME 개질 반응의 생성물의 평형 조성 분포를 온도, 압력, 원료의 공급비$(H_{2}O/DME)$를 변수로 하여 열역학적으로 해석하였고, DME, 에탄올, 또는 메탄올 수증기 개질 반응의 생성물의 분포를 비교하여 수소 생산을 위한 공급원료로의 가능성을 검토하였다. 여러 종류의 개질 촉매를 사용하여 DME 개질 반응을 수행해 본 결과, 반응온도 $300^{\circ}C$, 반응압력 1atm, 원료 공급비$(H_{2}O/DME)=3$인 반응조건에서 1.0wt% $Pd/{\gamma}$-alumina가 가장 좋은 활성 및 60% 이상의 수소 선택도를 보여주었으, 또한 원료의 공급비가 증가함에 따라 DME의 전환율 및 주 생성물인 수소의 수율이 현저하게 증가함을 보여주었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.264-267
• /
• 2005

수소의 소규모 분산 생산 기술은 본격적 인 수소 인프라가 도입되기 전에 연료전지 자동차의 수소 충 전용이나 분산 발전형 연료전지의 수소 공급을 위해 필요하다. 생산 용량은 수소 기준으로 $10\~100 Nm^3/hr$ 정도로 현재로선 천연가스의 수증기 개질법이 가장 경제적인 공정으로 알려져 있다. 소규모 생산에 따른 열효율 저하를 줄이 기 위해 단위 공정들이 통합된 컴팩트 개질 시스템의 개발이 필요하다. 핵심 기술인 컴팩트 리포머의 국산화 기술 확보를 위하여 $20 Nm^3/hr$용량의 동심관형 리포머를 설계, 제작하였다. 내부구조는 제작의 단순화를 고려하여 중첩된 동심관이 배열되었고 압력 손실과 열웅력 발생을 억제하도록 유로를 배치하였다. 수증기개질 반응에 필요한 반응열은 리포머 본체에 부착된 버너를 이용하여 공급하였다. 성능 측정을 위한 부속 기기로 상온 흡착식 탈황기, 폐열 회수형 수증기 발생기, 반응물 예열을 위한 열교환기, 생성 가스 응축기를 설계 제작하여 전체 리포밍 시스템을 구성하였다. 반응 온도 $680\~720^{\circ}C$, 탄소 대 수중기 비(S/C ratio) $2.7\~3.2$ 조건에서 수증기 개질 반응을 수행하였다. 해당 반응 조건에서 메탄 전환율 $89\%$ 이상, 저위 발열량 기준 개질 열효율 $70\%$ 이상을 달성하였고 개질 생성가스 내 수소의 최대 유량은 $23.4Nm^3/h$였다. 개발된 리포밍 시스템은 고순도 수소 생산이 필요한 경우, 수소 수율 향상을 위한 고온 수성 가스 전화 반응기를 통합 가능하도록 열교환기 구성을 조정할 수 있으며 용융 탄산염 연료전지와 같이 고온형 연료전지의 경우 $550^{\circ}C$ 이상으로 개질 생성 가스를 공급하도록 구성할 수도 있다. 향후 리포머 본체의 개질 효율 향상 및 장치 소형화, 부속 기기의 최적화를 통한 전체 리포밍 시스템 개선, 스케일 업 설계를 위한 엔지니어링 설계 패키지 구성을 계획하고 있다.

• Journal of agriculture & life science
• /
• v.53 no.4
• /
• pp.77-92
• /
• 2019

The purpose of this study was to investigate the carcass characteristics and the primal cut yields from carcasses according to the sex of Hanwoo. Experimental animals comprised of 80 cows, 29 bulls, and 71 steers. After slaughtering, they were evaluated to estimate the productivity of carcass components by market weight, and to predict the beef carcass yield. The average of fasting weight of cow, bull and steer were 634.75 kg, 721.86 kg, and 754.10 kg respectively. Market weight of Hanwoo at cold carcass weight, primal lean cut weight, sub-primal lean cut weight, bone weight and fat weight were 381.01~467.60 kg, 240.79~310.36 kg, 208.27~276.47 kg, 57.23~76.28 kg and 89.19~138.97 kg respectively. Body measurement traits had side length, hindquarter length, cervical vertebrae length, lumbar vertebrae length, sacral vertebrae length, 6th lumbar vertebrae~heel length, 5~6th thoracic vertebrae breadth, 4~5th lumbar vertebrae breadth, 5th sacral vertebrae breadth, 7~8th thoracic vertebrae girth and 7~8th thoracic vertebrae thick were highest length in steer. Carcass weight (CW) were significantly (p<0.05) affected by sex and live weight. The lean meat percentage, fat percentage and bone percentage based on the weight of cold carcasses were significantly different (p<0.05) between sex groups. The primal cuts rate for deungsim, moksim, abdari, udun, suldo, yangjee and satae were higher in bulls than those of the caws and steers. The carcass by-product weight rate in steer had lower oxtail and rib cartilage than cow and bull, while cow showed lower beef leg bones and jappyeo than bull steer (p<0.05). Body measurement traits was always important for primal cut weight estimates.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2010.04a
• /
• pp.188-188
• /
• 2010

수소 에너지는 화석연료의 한정된 매장량과 연소시 발생되는 환경문제를 해결하기 위해 가장 이상적인 대체에너지로서 주목을 받고 있다. 그러나 현재까지의 기술로는 경제성 있는 수소 제조가 쉽지 않다. 그 방법 중 바이오매스 및 유기성폐기물의 가스화를 통한 수소제조분야는 자원의 재순환, 페기물 처리, 열원의 이용, 직접적인 $CO_2$ 삭감 등의 부수적인 효과가 높아 경제성 있는 수소제조법으로 평가되고 있다. 이에 본 연구에서는 수소 생산을 목적으로 하는 가스화기와 초고온개질기로 구성된 Twin-Bed 가스화 시스템을 개발하고, 이를 이용한 Wood pellet(미송)의 가스화 특성 및 생성 가스의 초고온개질 특성을 고찰하는 것을 목적으로 한다. 가스화기의 시간변화에 따른 생성 가스 수율에 대한 결과, 생성 가스 수율은 약 20분경과 후 안정화되었으며, 실험 2시간 동안의 $H_2,\;CH_4,\;CO,\;CO_2$의 평균 수율은 각각 17.77, 11.94, 42.13, 28.16 Vol.%의 결과를 보였다. 가스화기로부터 생성된 가스는 down-draft 형태의 고온개질기로 도입시켜, $1100^{\circ}C$의 초고온에서 개질반응을 수행하였다. $CH_4$의 경우 11.95 Vol.%에서 0 Vol.%로 거의 대부분 분해되었으며, $H_2$는 17.77 Vol.%에서 25.46 Vol.%로 약 65.8% 증가하는 결과를 나타냈다. 또한 수소 생성량은 평균 5 L/min kg-Biomass이었다. 냉가스 효율은 72.1%로서 나타나, 일반적으로 폐기물의 냉가스 효율인 약 50% 전후의 결과에 비하여 높은 효율을 보였다.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.9
• /
• pp.911-916
• /
• 2006

The influence of substrate concentration and hydraulic retention time(HRT) on the hydrogen production by anaerobic microflora was investigated by conducting three series of continuous experiments the individual influences of substrate concentration and HRT. In series I, substrate concentration was increased from 3 to 27 g-glucose/L keeping HRT at 8 hr. Series II and III carried out same condition with series I at HRT of 16 hr and 24 hr, respectively. The effects of HRT and substrate concentration on the hydrogen production yield were analyzed by quadratic model. The maximum hydrogen production yield of 2.05 mol $H_2/mol$ glucose was found at the HRT of 9.6 hr and the substrate concentration of 15.4 g/L. The relationship between HRT and substrate concentration on hydrogen production yield as displayed a saddle shape in the response surface plot. Optimum HRT and substrate concentration are observed at in the range of 5 and 14 hr, at between 13 and 17 g/L, respectively, for the hydrogen production yield being 2 mol $H_2/mol$ glucose. The concentrations of organic acids increased with the increase of the amount of glucose consumption. Acetic acid and butyric acid were the main by-products from the glucose degradation.

• KSBB Journal
• /
• v.20 no.6
• /
• pp.401-407
• /
• 2005

Optimum culture conditions and medium composition for hydrogen production by Clostridium beijerinckii KCTC 1785 were investigated. Initial pH and temperature for growth were 7.0 and $35^{\circ}C$, respectively. Agitation accelerated the hydrogen production. Although C. beijerinckii KCTC 1785 could grow up to 6%(w/v) glucose in the medium, the optimum glucose concentration for hydrogen production was 4% and hydrogen content in the biogas was 37%(v/v). However, the economical glucose concentration for hydrogen production was 1% regarding to the residual glucose which was not used in the medium. During hydrogen fermentation, acetic and butyric acid were produced simultaneously. High concentrations of acetic(>5,000 mg/L) or butyric(>3,000 mg/L) acid inhibited hydrogen production. When pH was maintained at 5.5 in the batch fermentation, 1,728 mL of hydrogen was produced from 0.5% glucose within 15 hr. $H_2$ yield was estimated to be 1.23 mol $H_2/mol$ glucose. It was found that yeast extract or tryptose in the medium was essential for hydrogen production.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.12
• /
• pp.1239-1244
• /
• 2008

In this study, PCR-DGGE was conducted to investigate the variations of microbial community according to pH conditions from pH 3 to pH 10 during anaerobic fermentation process of hydrogen production. Maximum hydrogen yield was 1.8 mol $H_2$/mol substrate at pH 5. The microbial growth rate was not proportional to the hydrogen production rate at each pH. Variations of microbial community was observed at each condition from PCR-DGGE experiment of 16s rDNA. Klebsiella was main species of the microbial community. Streptococcus and Clostridium were mainly contributed for hydrogen production.