• Journal of Aquaculture
• /
• v.13 no.4
• /
• pp.317-323
• /
• 2000

Experimental cohorts of Mugil cephalus were divided into 5 groups : seawater~normal feed (SWN), acclimation to freshwater~normal feed (GFWN), acclimation to freshwater~salt feed (Gf\iVS), freshwater. normal feed (FWN) and freshwater-salt feed (f\iVS). Growth was faster in the SWN, Gf\iVS, and GFWN groups than in the f\iVS and FWN groups. Condition factor did not differ among the groups. Survival (92 %) of the juveniles was the highest in the Gf\iVS group; however, the others showed no significant difference. Moisture of FWN group was significantly higher than that of SWN group (P < 0.05). Potassium concentration was significantly higher in the SWN group than that of others (P < 0.05). It was highest (30 mmolfl) among the cohort of SWN.

• Korean Journal of Microbiology
• /
• v.37 no.1
• /
• pp.85-91
• /
• 2001

Biological treatment of benzene and toluene contaminated soil was investigated in laboratory microcosm of 16 different types for degrading benzene and toluene by indigenous bacteria. At the experimental conditions of the microcosms fast degrading benzene and toluene, moisture contents were 30% and 60% in a soil gap and content of powdered-activated carbon(PCA) for adhesion of benzene and toluene-degrading bacteria was 1% in total soil mass. At the conclusion of the shifted bacteria community, Case 6 and case 7 were operated until 10 days, and then the total cell number and the number of benzene and toluene degrading bacteria were investigated. The total cell number of Case 6 and Case 7 increased 488 fold and 308 fold of total indigenous cell, respectively. The number of benzene and toluene degrading bacteria increased and maintained the percentages occupied in pre-operating microcosm. Species of benzene and toluene degrading bacteria in microcosm changed from species of Gram negative bacteria to Gram positive bacterial species after soil exposed to benzene and toluene.

• Applied Chemistry for Engineering
• /
• v.24 no.6
• /
• pp.645-649
• /
• 2013

In this study, we investigated the $NH_3$ oxidation reaction characteristic over $W/TiO_2$ catalyst in order to control $NH_3$ generated from a thermoelectric power plant or incinerator. As a result, it was found that the optimal content of tungsten in $W/TiO_2$ catalyst is 10 wt% and $NH_3$ removal efficiency decreased due to decreasing specific surface areas of catalyst with increasing tungsten contents. When $NH_3$ was injected more than 420 ppm, $NH_3$ conversion decreased at the middle temperature range. In addition, $NH_3$ conversion decreased due to the competitive adsorption of moisture and with increasing oxygen concentration, the $NH_3$ conversion increased while the $N_2$ selectivity decreased.

• Polymer(Korea)
• /
• v.36 no.5
• /
• pp.622-627
• /
• 2012

This study focuses on mechanical property enhancement and volatile organic compounds (VOCs) reduction characteristic of environmentally-friendly waterborne coatings. We synthesized a series of organic-inorganic hybrid waterborne polyurethanes by using poly(tetramethylene glycol) 2000, polycarbonate diol 2000, isophorone diisocyanate, dimethylolpropionic acid and titanium dioxide. The study on the effects of the R ratio([NCO]/[OH]) and inorganic contents on environmentally-friendly waterborne coatings showed that the R ratio with more than 1.5 is appropriate due to arrangement of hardsegments. The applied $TiO_2$ on films reduced volatile organic compounds (VOCs).

• Korean Journal of Food Science and Technology
• /
• v.22 no.5
• /
• pp.549-554
• /
• 1990

Glycosidically bound fraction was separated from apricot by Amberlite XAD-2 adsorption and eluted with methanol. Aglycones were liberated from the bound fraction by enzymatic hydrolysis, acid hydrolysis or by means of simultaneous distillation-extraction at pH 3.0. A total of 40 components were identified in three bound volatile fractions. Besides linalool oxide, linalool. ${\alpha}-terpineol$, nerol, geraniol, benzyl alcohol and 2-phenylethyl alcohol, previously reported as glycosidically bound volatiles, the following components were identified for the first time as glycosidically bound volatiles in apricot: 2,6-dimethyl-3,7-octadiene-2,6-diol , 3.7-dimethyl-1,5-octadiene-3,7-diol, (E)- and (Z)-2.6-dimethyl-2,7-octadiene-1,6-diol, $3,4-didehydro-{\beta}-ionol,\;3-oxo-{\alpha}-ionol$, $3-hydroxy-7,8-dihydro-{\beta}-ionol,\;3-oxo-7,8-dihydro-{\alpha}-ionol ,\;3-hydroxy-{\beta}-ionone$, eugenol, 4-hydroxyethylphenyl acetate and 2,3-dihydrobenzofuran.

• Journal of Energy Engineering
• /
• v.23 no.2
• /
• pp.1-6
• /
• 2014

Upgrading technology has been studied for efficient utilization of low rank coal. Spray coating of heavy oil was applied on the upgrading process in order to stabilize low rank coal against spontaneous combustion. Low rank coal, which contains more than 30wt% of moisture, was upgraded to high calorific coal and stabilized by spray coating of heavy oil. It was identified that spray coating of heavy oil after drying coal is the optimum procedure of upgrading low rank coal. The experimental results show that more than 2wt% of heavy oil should be adsorbed on the coal in order to stabilize sufficiently for spontaneous combustion.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.4
• /
• pp.327-332
• /
• 1997

This study was conducted to find out the effect for removal of $NH_3$ gas, one of the offensive odor. The removal efficiencies of $NH_3$ gas through zeolie column increased with the decreased percolation velocity. The effect of zeolite colum in removing $NH_3$ gas was influenced by the water content of zeolite and the added amount of zeolite, but was not influenced by the setting method of zeolite. The $NH_3$ gas removing sequence of saturated cation species on zeolite was in order of Ca->Na->$NH_4$ ->Natural->K-zeolite. Consequently the effect of zeolite on $NH_3$ gas removal efficiency is consided by the water content, added amount and saturated cation of the zeolite.

• Journal of Adhesion and Interface
• /
• v.22 no.4
• /
• pp.153-157
• /
• 2021

Graphene, a two-dimensional carbon allotrope, has outstanding mechanical and electrical properties. In particular, the charge carrier mobility of graphene is known to be about 100 times higher than that of silicon, and it has received attention as a core material for next-generation electronic devices. However, graphene is very sensitive to environmental conditions, especially vulnerable to moisture or oxygen. It becomes a disadvantage in that the stability of the graphene-based electronic device, so various attempts are being made to solve this problem. In this work, we report a method to greatly improve the stability by controlling the surface energy of the polymer layer used for transferring the insulating layer of the graphene field-effect transistor. As the surface energy of the polymer used as the insulating layer was lowered, the stability could be improved by effectively controlling the adsorption of impurities in the atmosphere such as water molecules or oxygen.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.1
• /
• pp.122-134
• /
• 2015

This study was conducted to investigate the potential of torrefied larch wood as a raw material of pellets. First of all, larch chip was torrefied at the temperatures of 230, 250 and $270^{\circ}C$ for 30, 50 and 70 min. Secondly, moisture content, moisture absorption, higher heating value and ash content of the torrefied chip were measured to examine the effects of torrefaction conditions on the fuel characteristics of larch. Thirdly, surfaces of the torrefied chip were observed by light microscope (LM), field emission scanning microscope (FE-SEM) and SEM-energy dispersive spectroscopy (EDXS). With the increases of torrefied temperature and time, contents of lignin increased and those of hemicellulose reduced. Moisture content of torrefied larch chip was greatly lower than that of non-torrefied chip. Moisture absorption of the torrefied chip decreased as torrefaction temperature increased. As torrefaction temperature increased, higher heating value and ash content of larch chip increased. However, durability of torrefied-larch pellets was remarkably lower comparing to non-torrefied-larch pellets. When surface of larch chip was observed by LM and FE-SEM, surface color and cell wall of the chip was getting darker and more collapsed with the increases of torrefaction conditions. Through the analysis of SEM-EDXS, distribution and quantity of lignin existing on the surface of larch chip increased with the increases of torrefied conditions. In conclusion, $270^{\circ}C$/50 min might be an optimal condition for the torrefaction of larch with the aspect of fuel characteristics, but torrefaction condition of $230^{\circ}C$/30 min should be considered according to the durability of torrefied-larch pellets.

• Korean Chemical Engineering Research
• /
• v.51 no.5
• /
• pp.609-614
• /
• 2013

This study investigated the spontaneous combustion behavior of solvent-treated low rank coals. Indonesian lignite (a KBB and SM coal) and sub-bituminous (a Roto coal) were mixed with non-polar 1-methyl naphthalene (1MN) either by mechanical agitation or ultrasonication. The property change associated with 1MN treatment was then analyzed using proximate analysis, calorific value analysis, Fourier transform infrared (FT-IR), X-ray photoelectron spectroscopy and moisture re-adsorption test. Susceptibility to spontaneous combustion was evaluated using crossingpoint temperature (CPT) measurement along with gas analysis by GC. A FT-IR profile showed that oxygen functional groups and C-H bonding became weaker when treated by 1 MN. XPS results also indicated a decrease of the oxygen groups (C-O-, C=O and COO-). Increased hydrophobicity was found in the 1MN treated coals during moisture readsorption test. A CPT of the treated coals was ${\sim}20^{\circ}C$ higher than that of the corresponding raw coals and the ultrasonication was more effective way to enhance the stability against spontaneous combustion than the agitation. In the gas analysis less CO and $CO_2$ were emitted from 1MN treated coals, also indicating inhibition of pyrophoric behavior. The surface functional groups participating in the oxidation reaction seemed to be removed by the ultrasonication more effectively than by the simple mechanical agitation.