• Journal of the Korean Institute of Landscape Architecture
• /
• v.41 no.6
• /
• pp.107-116
• /
• 2013

This study was undertaken to investigate the characteristics of retention and evapotranspiration in the extensive greening module of sloped and flat rooftops for stormwater management and urban heat island mitigation. A series of 100mm depth's weighing lysimeters planted with Sedum kamtschaticum. were constructed on a 50% slope facing four orientations(north, east, south and west) and a flat rooftop. Thereafter the retention and evapotranspiration from the greening module and the surface temperature of nongreening and greening rooftop were recorded beginning in September 2012 for a period of 1 year. The characteristics of retention and evapotranspiration in the greening module were as follows. The water storage of the sloped and flat greening modules increased to 8.7~28.4mm and 10.6~31.8mm after rainfall except in the winter season, in which it decreased to 3.3mm and 3.9mm in the longer dry period. The maximum stormwater retention of the sloped and flat greening modules was 22.2mm and 23.1mm except in the winter season. Fitted stormwater retention function was [Stormwater Retention Ratio(%)=-18.42 ln(Precipitation)+107.9, $R^2$=0.80] for sloped greening modules, and that was [Stormwater Retention Ratio(%)=-22.64 ln(X)+130.8, $R^2$=0.81] for flat greening modules. The daily evapotranspiration(mm/day) from the greening modules after rainfall decreased rapidly with a power function type in summer, and with a log function type in spring and autumn. The daily evapotranspiration(mm/day) from the greening modules after rainfall was greater in summer > spring > autumn > winter by season. This may be due to the differences in water storage, solar radiation and air temperature. The daily evapotranspiration from the greening modules decreased rapidly from 2~7mm/day to less than 1mm/day for 3~5 days after rainfall, and that decreased slowly after 3~5 days. This indicates that Sedum kamtschaticum used water rapidly when it was available and conserved water when it was not. The albedo of the concrete rooftop and greening rooftop was 0.151 and 0.137 in summer, and 0.165 and 0.165 in winter respectively. The albedo of the concrete rooftop and greening rooftop was similar. The effect of the daily mean and highest surface temperature decrease by greening during the summer season showed $1.6{\sim}13.8^{\circ}C$(mean $9.7^{\circ}C$) and $6.2{\sim}17.6^{\circ}C$(mean $11.2^{\circ}C$). The difference of the daily mean and highest surface temperature between the greening rooftop and concrete rooftop during the winter season were small, measuring $-2.4{\sim}1.3^{\circ}C$(mean $-0.4^{\circ}C$) and $-4.2{\sim}2.6^{\circ}C$(mean $0.0^{\circ}C$). The difference in the highest daily surface temperature between the greening rooftop and concrete rooftop during the summer season increased with an evapotranspiration rate increase by a linear function type. The fitted function of the highest daily surface temperature decrease was [Temperature Decrease($^{\circ}C$)=$1.4361{\times}$(Evapotranspiration rate(mm/day))+8.83, $R^2$=0.59]. The decrease of the surface temperature by greening in the longer dry period was due to sun protection by the sedum canopy. The results of this study indicate that the extensive rooftop greening will assist in managing stormwater runoff and urban heat island through retention and evapotranspiration. Sedum kamtschaticum would be the ideal plant for a non-irrigated extensive green roof. The shading effects of Sedum kamtschaticum would be important as well as the evapotranspiration effects of that for the long-term mitigation effects of an urban heat island.

• Journal of Korean Society of Forest Science
• /
• v.99 no.1
• /
• pp.131-135
• /
• 2010

This study was carried out to establish a proper cultivation condition and diagnose the drought-tolerance of three wild edible greens belonging to genus of Ligularia by using pressure-volume curves methods. The result of the original bulk osmotic pressure at maximum turgor ${\Psi}_{\circ}{^{sat}}$ was -0.8 MPa in Ligularia fischeri and L. stenocephala, which was somewhat lower than the value, -0.7 MPa, in L. fischeri var. spiciformis. In addition, the values of the osmotic pressure at incipient plasmolysis ${\Psi}_{\circ}{^{tlp}}$ in L. fischeri and L. stenocephala, both of which were -0.9 MPa, These were slightly lower than that of -0.8 MPa in L. fischeri var. spiciformis. On the other hand, it appeared that the values of maximum bulk modulus of elasticity $E_{max}$ of L. fischeri and L. stenocephala were approximately two times higher than that of L. fischeri var. spiciformis. However, There was a distinct difference between the values of the relative water contents in these three species. Therefore, Ligularia spp, occurring incipient plasmolysis in the high water contents, have a relatively low property of drought-tolerance, suggesting that growth of those Ligularia spp. are appropriate for relative moisture forest.

• Korean Journal of Food Science and Technology
• /
• v.29 no.2
• /
• pp.292-301
• /
• 1997

In drying process, to minimize the quality degradation by improved drying process and pretreatment methods, carrots, cabbages and radishes were dried and rehydrated. Physico-chemical properties of product were analyzed to determine the optimum pretreatment method and drying models were applied to explain drying mechanisms. Microwave, steam and water were used prior to drying as blanching method. In consideration of physical properties, optimum treatment time was decided that microwave was 1 min, steam and water were each 10 min. Control, steam, water, microwave and osmotic dehydration were treated prior to drying as pretreatment individually, osmotic dehydration was lower than the other treatmemt in drying efficiency, but carotene content was higher than the others. The effect continued after rehydration. Ten panelists tested dried and rehydrated carrots. After rehydration, the quality of air dried product with osmotic dehydration was superior to freeze dried without treatment. The fittness of drying models were conducted in order to explain the mechanism of drying each process. Quadratic model was most fittable to explain during drying. However, in rehydration process, no fittable model was found.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.20 no.3
• /
• pp.202-207
• /
• 1987

Esterifying conditions to produce propylene glycol alginate (PGA) with alginic acid and propylene oxide were determined, and physico-chemical properties of the PGA were also determined. The rate of esterification increased with the content of propylene oxide up to 4 mole. Alginic acid containing $30\%$ of water shelved maximum esterification, however, it was dificult to remove the surplus moisture in the alginic acid when it cotained the moisture above $70\%$. Maximum esterification was taken place when alginic acid with $44.15\%$ water was reacted with 4mole of propylene oxide at $70^{\circ}C$. The rate of esterification of alginic acid with $50.05\%$ of water increased up to 1 hour at $70^{\circ}C$, followed by no significant increase with reaction time. No significant decrease in the viscosity of $2-3\%$ PGA solution occurred, up to pH 3.0. Pseudoplastic characteristics were kept in case of $1\%,\;2\%\;3\%$ and $5\%$ of PGA solution in the pH of 1.0-5.0.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.9
• /
• pp.1064-1069
• /
• 2014

The use of emulsified fuel and EGR (Exhaust gas recirculation) system are effective methods to reduce NOx emission from diesel engines. In general, it is considered that EGR method influences diesel engine combustion in three different ways: thermal, chemical and dilution effect. Among others, the thermal effect is related to the increase of specific heat capacity due to the presence of $CO_2$ and $H_2O$ in inlet air. Meanwhile, emulsified fuel method of utilizing latent heat of vaporization and miro-explosion has been recognized as an effective technique for reducing diesel engine emissions. In this paper, an author studied on combustion and emission characteristics by using emulsified fuel (EF, Light oil : 80% + Water : 20%) and EGR (30% EGR ratio) system. And the effect of fuel injection pattern control was investigated.

• Journal of Animal Environmental Science
• /
• v.8 no.3
• /
• pp.191-198
• /
• 2002

This study was conducted to determine changes in internal temperature and chemical composition during the composting of broiler litter(BL) and to evaluate the feasibility of use of a small-scale pelletizer for the pelleting of composted BL. BL was composted for 4 weeks in an wooden cell with a size of 1 m length $\times$ 1 m width $\times$ 1.2 m height. Internal temperature reached to peak(68$^{\circ}C$) at the fourth day and thereafter gradually reduced. Among chemical components in BL, composting reduced organic matter content and increased dry matter and indigestible protein(ADF-CP) contents. When BL was pelleted using an economical small-scale pelletizer, the proper die diameter was 8~18 mm and the proper moisture content of composted BL was 20~25%. Beyond these proper conditions, addition of heat and pressure or pellet aids may be necessary. Pelleting of BL resulted in nearly threefold increase of bulk density, significant moisture evaporation, and little change in chemical components except for increased indigestible protein. In conclusion, BL may be converted into a feed with low to medium nutrition by the composting and pelleting process.

• Journal of Animal Environmental Science
• /
• v.9 no.2
• /
• pp.113-122
• /
• 2003

This on­farm study was conducted to evaluate the effect of feeding deepstacked broiler excreta­saw dust­rice hulls(DBSR) pellets on feed intake, production and economy of growing Hanwoo steers and Holstein bulls. Formulated mix and rice straw were replaced at 16％ and 48％ levels for growing Hanwoo steers(6 wk of feeding period) and at 4％ and 18％ levels for Holstein bulls(12 wk) with DBSR pellets. Control and treated diets were formulated to be isoenergetic and DBSR pellets were fed ad libitum. Palatability of DBSR pellets turned out to be favorable. Compared with the control group, feeding DBSR pellets did not affect body weight gain, average daily gain and feed efficiency(P＞0.05). Feed cost per gain was reduced by 18.5％ for Hanwoo steers and 3.5％ for Holstein bulls. Feeding DBSR pellets to Holstein bulls did not affect carcass weight and grades of meat yield and quality. These results indicate that deepstacked cage broiler excreta mixture may be effectively used as a feed ingredient for growing ruminants.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.12
• /
• pp.960-966
• /
• 2013

In this study, operation data from an actual plant in M city were analyzed to evaluate effects of water supply into sewage sludge on the co-incineration of municipal solid waste (MSW) and sewage sludge. Design capacity of the stoker incinerator is 50 m3/day. Maximum portion of sewage sludge in the total waste input was 20%. According to this research, moisture content increase up to 85% of sewage sludge could be possible by water supply on MSW input to the incinerator. Therefore, stable operation of incinerator could be achieved. As water was added into sewage sludge up to 85%, input quantity of sewage sludge to frequency (Hz) was similar to theoretical input. Also, it is concluded that stable management of incinerator without leachate combustion and damages of refractory bricks and castable could be achieved by the reduction of low heating value.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.4
• /
• pp.41-50
• /
• 1987

The present study was conducted to measure and predict the leachate generation and to establish the methods of leachate control and handling by both field and lab-lysimeter studies. The change of biodegradable matter, field capacity, dry density, quantity and quality of leachate as a function of time of landilling were measured. The model based on the theory of unsaturated flow and contaminant transport in porous media was developed and simulation model was used for the prediction of movement of landfill moisture and for the strength in leachate in terms of organic and inorganic contaminant. The model constructed from the present study in terms of unsaturated decomposition and transport combined with the evapotranspiration and surface runoff showed good agreement with the results obtained by lysimeter studies.

• Membrane Journal
• /
• v.25 no.5
• /
• pp.456-463
• /
• 2015

In this study, we synthesize novel silane based inorganics for preparation of the polymer electrolyte membrane with high proton conductivity under high temperature condition and developed membranes are characterized. SPAES, hydrocarbon based polymer are synthesized and used as main polymeric material. We used sol-gel method to prepare inorganic material with high performance using silica, phosphate and zirconium. Three types of inorganics were prepared by control of the mole ration of each component. As a result of EDX analysis, the inorganic materials are well dispersed in the polymer membrane. The water uptake of the composite membrane is increased by introduction of the hydrophilic inorganic material in the membrane. When the content of the zirconium in the membrane is increased, the proton conductivity of the composite membrane shows the higher value than pure SPAES membrane at the high temperature. And the silica based inorganics effect to increase the proton conductivity under low temperature condition.