• 기계와재료
• /
• v.10 no.4 s.38
• /
• pp.6-17
• /
• 1998

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.1
• /
• pp.48-55
• /
• 2016

The assessment and prediction of service life of a structure are usually under uncertainty so that rational probabilistic concepts and methods have to be applied. Based on these rational assessment and prediction, optimum maintenance strategies to minimize the life-cycle cost and/or maximize the structural safety can be established. The service life assessment and prediction considering maintenance actions generally includes effects of maintenance types and times of the structural components on the service life extensions of structural system. Existing researches on the service life management have revealed the appropriate system modeling considering the correlation among the components is required for system reliability analysis and probabilistic service life estimation. However, the study on correlation among the maintenance actions is still required. This paper deals with such a study for more effective and efficient service life management. In this paper, both the preventive and essential maintenances are considered for the extended service life estimation and management.

• Analytical Science and Technology
• /
• v.13 no.2
• /
• pp.166-172
• /
• 2000

The life expectation of power transformers is basically dependent on the aging deterioration of insulating paper which can not be obtained from operating transformers. Therefore, it will be very useful if we can manage transformers by indirect analysis of degradation products. "Furan derivatives" are known the decomposition products which are generated by the degradation of cellulose in insulating paper. We proved that 2-furfural is the only measurable product from our transformers, and determined easily the concentration of 2-furfural by HPLC without any specific pretreatments, Compared to concentration of $CO_2$ and CO by GC, the concentration of 2-furfural by HPLC can estimate more accurately aging characteristics of transformers. We expect that these results can be utilized to predict the aging characteristics and life diagnosis of power transformers.

• Journal of the KSME
• /
• v.32 no.4
• /
• pp.351-357
• /
• 1992

고온 사용 설비의 잔여수명을 진단하는 비파괴적인 여러 가지 방법 중에서 현장에서 간단히 측 정을 함으로써 경년열화 정도를 비교적 쉽게 알아낼 수 있는 경도법에 대하여 살펴보았다. 이 방법은 크립손상 평가뿐만 아니라 피로 손상 평가에도 사용되고 있으며 외국의 경우 현장에서 많이 사용되고 있는, 가장 보편화된 방법 중의 하나이다. 국내의 경우에도 노후화된 고온 사용 설비가 상당수되기 때문에 설비의 안전성이나 경제적인 운용을 위해서 이들의 손상 정도를 정 기적으로 진단할 필요성이 매우 크나 이에 대한 연구 성과는 외국에 비하여 미미한 편이기 때 문에 앞으로 이에 대한 많은 노력이 이루어져야 한다고 생각되나. 특히 현장에서는 휴대용 시 험기를 사용하여야 하나 수명평가에는 비커스 경도값을 사용하고 있기 때문에 이들의 경도 환 산에 대한 D/B 확충이 시급한 실정이다. 또한 기존 기술의 습득 및 손상 평가의 정확도 향상, 새로운 방법들의 개발 그리고 이들의 현장 적용 등을 위해서는 실기 사용재의 입수, 정보교환, 전문가시스템(expert system) 개발을 위한 D/B 구축 등 산 . 학 . 연의 협동이 절실히 요구된다.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.572-574
• /
• 2005

전력용 변압기 내부의 주요 부품들은 권선과 코일 및 절연물로 크게 나눌 수 있는데, 이들 구성물질 중 권선과 코일은 $30\sim40$년 운전기간동안 별다른 문제를 야기하지 않아 일반적으로 변압기의 수명은 거의 절연물의 수명과 일치한다고 알려져 있다. 특히 절연지의 열화에 매우 의존적이다. 절연지의 인장강도나 중합도 분석 등은 상당량의 절연지를 필요로 하기 때문에 운전 중 변압기의 열화진단을 위해서는 부적절하다. 따라서 HPLC 에 의한 furfural 분석은 변압기의 절연지의 둔해 정도를 평가하는 좋은 방법이 되고 있다. 이 논문은 그동안 한전의 변압기들에 대한 furfural 분석결과와 경년열화실험을 통한 절연열화물들에 대한 분석결과를 토대로 변압기의 수명평가를 위한 기초를 마련하고자 하였다.

• KEPCO Journal on Electric Power and Energy
• /
• v.5 no.4
• /
• pp.263-273
• /
• 2019

South Korea's OF cable is reaching its expected design life of 30 years, and as a result, the risk of failure is increasing. Therefore, it is necessary to diagnose the long-term operating OF cables through accurate diagnosis at the right time to prevent the failure. Currently, the KEPCO periodically conducts DGA. However, the gas found in DGA is caused by oil deterioration as well as insulation paper. Therefore, the analysis of the degree of polymerization and furan compounds which is an evaluation of insulation paper considered to be the life of OF cables is required. In addition, the results of the evaluation of deterioration of insulation paper need to be checked for correlation with the results of DGA. In this study, DGA carried out through GC, the degree of polymerization was analyzed using an automatic viscometer, and HPLC was used to detect the furan compounds. In addition, the obtained results were applied to the SVM technique, which was recently introduced to determine abnormalities in OF cable. And the results which were accurate and reliable were obtained.

• Proceedings of the KIEE Conference
• /
• 2009.04a
• /
• pp.67-69
• /
• 2009

수십년 간 주요 운송 수단의 한가지로 사용되고 있는 도시철도는, 사고 발생 시 큰 경제적 손실과 사회적 손실을 야기할 수 있으나, 사고의 주 원인 중 한가지인 도시철도 전력설비 고장에 대한 감시 및 진단 시스템은 적용되고 있지 않은 실정이다. 최근 이러한 전력설비 상태 감시 및 진단에 대한 필요성이 점차 커지게 되어, 도시철도 전력설비 수명예측 시스템 설계에 관한 연구 과제가 제안되어 현재 국토해양부와 건설기술평가원, 그리고 한국철도기술연구원의 주도 하에 수행되고 있다. 본문에서는 수명예측 시스템 설계에 필요한 도시철도 전력 시스템의 특성과 고장 사례를 조사하였으며, 각 도시철도 운영기관의 사용자 요구사항 설문 결과, 그리고 수명예측 시스템의 일부인 전력설비 감시진단 시스템 기초 설계 결과를 나타내었다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.3
• /
• pp.48-55
• /
• 2013

In this study, fatigue tests were performed on longitudinal out-of-plane gusset fillet welded joints and transverse non-load-carrying cruciform rib fillet welded joints, and then applicability of hammer-peening treatment on improvement of fatigue life for fatigue damaged weld joints were investigated. Fatigue tests were carried out on three types of gusset and rib welded specimens: as-welded specimens, post-weld hammer peened specimens and hammer peened specimens at 50% of as-welded specimen's fatigue life. Before and after hammer peening treatment, the geometry of weld toes and surface stresses near weld toes were measured. As a result of hammer peening treatment, compressive residual stresses of 30-83MPa were introduced near weld toes of the gusset and rib welded joints, and 130% increase in fatigue life and fatigue limit of the welded joints could be realized by hammer peening treatment at 50% fatigue life of as-welded conditions.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.6
• /
• pp.45-52
• /
• 2019

Steel corrosion due to carbonation in RC (Reinforced Concrete) structures easily occurs in urban cities with high CO₂ concentration. RC structures are always subjected to external loading with various boundary conditions. The induced stress level causes changes in diffusion of harmful ion like CO₂. In this work, a quantification of carbonation progress with stress level is carried out and carbonation prediction is derived through the relations. Determining the design parameters like cover depth, CO₂ diffusion coefficient, carbonatable materials, and exterior CO₂ concentration as random variables, service lifes under carbonation with design parameter's variation are obtained through MCS(Monte Carlo Simulation). Additionally the service life with different stress level is derived and the results are compared with those from deterministic method. Cover depth and cement hydrates are evaluated to be very effective to resist carbonation, and the proposed method which can consider the effect of stress on service life can be applied to maintenance priority determination.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.1
• /
• pp.32-39
• /
• 2018

Repairing timing and the extended service life with repairing are very important for cost estimation during operation. Conventionally used model for repair cost shows a step-shaped cost elevation without consideration of variability of extended service life due to repairing. In the work, RC(Reinforced Concrete) Column is considered for probabilistic evaluation of repairing number and cost. Two mix proportions are prepared and chloride behavior is evaluated with quantitative exterior conditions. The repairing frequency and cost are investigated with varying service life and the extended service life with repairing which were derived from the chloride behavior analysis. The effect of COV(Coefficient of Variation) on repairing frequency is small but the 1st repairing timing is shown to be major parameter. The probabilistic model for repairing cost is capable of reducing the number of repairing with changing the intended service life unlike deterministic model of repairing cost since it can provide continuous repair cost with time.