• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.90-98
• /
• 2018

An efficient R&D Methodology with minimized development period and cost needs to be developed due to advanced performance requirements of weapon systems. This will require the performance of logistics support analysis and design verification in the development stages of weapon systems through VR technology. VR technology has been applied to the Integrated Logistics Support (ILS) process as a part of collaborative system. In this study, we propose a development and application plan of ILS based on VR technology during the total life cycle of weapon systems. Moreover Digital Maintenance System (DMS) is introduced as a VR tool with key functions. finally, applications and improvement topics of DMS are suggested for use in ILS development.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.5
• /
• pp.815-825
• /
• 2017

Visibility of lane marking is impaired at night or in the rain, which thereby threatens traffic safety. Recently, various studies and technologies have been developed to improve lane marking visibility, such as the extension of lane marking life expectancy (up to 1.5 times), improvement of lane marking equipment productivity, improvement of lane marking visibility by applying phosphorescent material mixed paint. Cost-benefit analysis was performed with considering various benefit items that can be expected. About 45% of traffic accidents would be prevented by improving lane marking visibility. Additionally, accident reduction benefit and traffic congestion reduction benefit were calculated as much as 246 billion KRW per year and 12 billion KRW per year, respectively, by reducing repaint cycle due to enhanced durability. 45 billion KRW per year is expected to reduced with improved lane detection performance of autonomous vehicle. Meanwhile, total increased cost when introducing phosphorescent material mixed paint to 91,195km of nationwide road is identified as 1922 billion KRW per year. However, economic feasibility could not be secured with 0.16 of cost-benefit ratio when applied to the road network as a whole. In case of "Accident Hot Spot" analyzing section window (400m), one or more fatality or two or more injured (one or more injured in case of less than 2 lanes per direction) per year were caused by pavement marking related accident, economic feasibility was secured. In detail, 3.91 of cost-benefit ratio is estimated with comparison of the installation cost for 5,697 of accident hot spot and accident reduction benefit. Some limitations and future research agenda have also been discussed.

• Journal of the Korean Vacuum Society
• /
• v.20 no.3
• /
• pp.217-224
• /
• 2011

of materials and simplification of process. Micro-blasting is one of the promising method for recycling of waste wafer due to their simple and low cost process. Therefore, in this paper, we make recycling wafer through the micro-blaster. A surface etched by micro-blaster forms particles, cracks and pyramid structure. A pyramid structure formed by micro-blaster has a advantage of reflectivity decrease. However, lifetime of minority carrier is decreased by particles and cracks. In order to solve this problems, we carried out the DRE(Damage Romove Etching). There are two ways to DRE process ; wet etching, dry etching. After the DRE process, we measured reflectivity and lifetime of minority carrier. Through these results, we confirmed that a wafer recycled can be used in solar cell.

• Journal of the KSME
• /
• v.29 no.6
• /
• pp.573-580
• /
• 1989

현재 한국의 자동차 공업은 80년대 초반부터 급격한 발전으로 세계의 다른 자동차 생산국으로부 터 경계의 대상이 되고 있다. 그러나 그 내면을 살펴보면 아직도 중요한 기술은 거의 대부분 일 본이나 독일, 미국 등 자동차 선진국의 기술에 의존하고 있으며 특히 엔진 분야는 대부분 외국 기술에 의존하고 있다고 해도 과언이 아니다. 엔진은 자동차 생산원가의 약 30%를 차지하며 자동차의 성능을 좌우하는 경우 기술료 지급은 물론이며 부품구매 선택의 여지가 없어진다. 또한 요즈음과 같이 상품의 수명주기가 짧게 되어 가는 추세 하에서는 시장의 요구에 대처해나가는 엔지니어링 적응력이 부족하게 되면 결국 경쟁성을 상실하게 된다. 그러나 이러한 문제점을 인 식하면서도 80년대 초까지 독자적인 엔진개발을 하지 못했던 원인은 크게 2가지로 분석할 수 있다. 첫째는 한국의 자동차 회사들의 기술 축적의 미약과 둘째는 독자개발의 낮은 투자효율성 이다. 즉 엔진과 변속기를 기술 도입할 때 기술료 지급은 자동차 생산댓수당 5-6만원에 달하지만 엔진과 변속기를 독자개발시의 투자비는 약 300-500억원에 달하므로 간단한 산술적 계산으로는 모델당 100만대를 생산하여야만 투자의 가치가 있는 것으로 보여진다. 물론 위에서 언급한 바와 같은 여러 가지 요인에 의하면 이 숫자보다 훨씬 적은 생산량으로도 경쟁성이 확보될 것으로 예상된다. 이제 한국의 자동차 생산량도 연간 백만 대를 상회하는 수준이며 앞으로도 급격한 양과 질적인 팽창이 기대되고 있는 시점에 자동차 메이커들은 각사 모두 독자적인 고유 엔진 개발을 착수하였으며 일부 회사는 이미 성공을 거두어 양산 준비를 하고 있는 것으로 알고 있다. 그러나 아직도 엔진의 설계부터 양산까지 걸리는 기간이 타 선진 메이커에 비하면 상당히 길며 이로 인해 신제품의 경쟁력 저하가 우려되고 있는 상태이다. 이러한 문제점 해결에 도움을 주기 위해서 학계는 기업체의 기술 개발방향과 전략을 이해하는 것이 필요하다.grightarrow$cn-semistratifiable over$\longrightarrow$semistratifiable over $\alpha$ 2, 어떤 공간이 cn-Semistratifiable over $\alpha$이기 위한 필요충분 조건은 그것이 linearly cushioned cn-pairnet를 갖는 것이다. 3. cn-semistratifiable over $\alpha$의 부분공간 역시 cn-semistratifiabie over $\alpha$ 하다. 4. on-semistratifiable over $\alpha$의 유한개의 적공간 역시 cn-semistratifiabie over $\alpha$한다. 5. 폐 cn-semistratifiable over $\alpha$ 부분공간들의 합공간 역시 on-semistrbtifiable over $\alpha$ 하다. 6. 폐연속 net-cevering 함수에 의하여 cn-semistratifiable over $\alpha$ 성질이 보존된다. 보잘것이 없었고, 현재에도 각 시도별 또는 대학주관의 경시대회가 있으나 거국적인 호응을 받지 못했다. 물론 국제 대회에 참석시키는 것은 엄두도 내지 않았다.로 나타났다. 4. 코코넛과 소나무수피의 경우 암모니아 가스에 대한 흡착 능력은 거의 비슷한 것으로 사료되며, 코코넛의 경우 전량을 수입에 의존하고 있다는 점에서 국내 조달이 용이하며, 구입 비용도 적게 소요되는 소나무수피를 사용하는 것이 경제적이라고 사료된다. 5. 마지막으로 악취제거 미생물균주를 접종한 소나무수피 50%와 펄라이트 30%의 혼합재료를 24시간 동안 장기간 운전 실험을 수행한 결과 암모니아 99.06%, 황화수소 96.61%의 제거

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.759-767
• /
• 2021

Most weapons systems that are Force Integration are expensive equipment that reflects the latest technology, and the operation and maintenance cost is increasing continuously. Factors that efficiently operate and maintain these weapon systems include maintenance plans, economic costs, and repair part requirements. Among them, predicting the repair parts requirements during the life cycle in advance is an important way to increase operation and maintenance cost efficiency and operating availability. The start of requirement analysis for repair parts is a calculation of the CSP (CSP: Concurrent Spare parts, CSP hereafter) that is distributed when the weapon system is deployed. The CSP is an essential component of achieving the operating availability during this period because the weapon system aims to successfully perform a given operation mission without resupply for an initial set period. In the present study, the CSP calculation method was analyzed, reflecting the failure rate and operating time of items, but the analyzed CSP was aimed at preparing for technical failure, but in the initial operating environment, it is limited in coping with unexpected failures caused by human error. The failure is not included in the scope of free maintenance and is a serious factor in making the weapon system inoperable during the initial operation period. To prevent the inoperable status of a weapon system, CSP that considers human error is required in the initial operating environment, and the calculation criteria and measures are proposed.

• Radiation Oncology Journal
• /
• v.23 no.3
• /
• pp.186-193
• /
• 2005

Purpose: To improve the management of a medical linear accelerator, the records of operational failures of a Varian CL2l00C over a ten year period were retrospectively analyzed. Materials and Methods: The failures were classified according to the involved functional subunits, with each class rated Into one of three levels depending on the operational conditions. The relationships between the failure rate and working ratio and between the failure rate and outside temperature were investigated. In addition, the average life time of the main part and the operating efficiency over the last 4 years were analyzed. Results: Among the recorded failures (total 587 failures), the most frequent failure was observed in the parts related with the collimation system, including the monitor chamber, which accounted for $20\%$ of all failures. With regard to the operational conditions, 2nd level of failures, which temporally interrupted treatments, were the most frequent. Third level of failures, which interrupted treatment for more than several hours, were mostly caused by the accelerating subunit. The number of failures was increased with number of treatments and operating time. The average life-times of the Klystron and Thyratron became shorter as the working ratio increased, and were 42 and $83\%$ of the expected values, respectively. The operating efficiency was maintained at $95\%$ or higher, but this value slightly decreased. There was no significant correlation between the number of failures and the outside temperature. Conclusion: The maintenance of detailed equipment problems and failures records over a long period of time can provide good knowledge of equipment function as well as the capability of predicting future failure. Wore rigorous equipment maintenance Is required for old medical linear accelerators for the advanced avoidance of serious failure and to improve the qualify of patient treatment.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.4
• /
• pp.35-45
• /
• 2013

Facility Management is the longest in the building of life cycle. Because it occupies more than 80% of cost, the phase of Facility Management has to be managed and has to be perceived as important as design and construction phase. The method to manage building more efficiently is the introduction of Facility Management System used by CAD and database. But information Requirement is now input by hand in the most Facility Management System. This study aims to analyze the example of applying BIM in the Korea or abroad and the errors of this were deducted by many phase. Lastly, the possible solution is suggested in order to be used in the Facility Management System. This study's benchmarking is COBIE which is developed by the COE(Corps of Engineers) and now popular in the world. The suggestion in this study is the method that I have already mentioned is helpful for a designer to do modeling when a designer uses BIM S/W(software). To be more specific, the method plays a side role in helping data input considering the phase of Facility Management.

• Journal of the Korean Data and Information Science Society
• /
• v.28 no.4
• /
• pp.811-818
• /
• 2017

Environmental tests are used to verify a equipment that can withstand the rigors of harsh environments. In case of military products for export, the tests have to be based on the climatic data of the world. However, if the climatic data of the world is used for domestic military products, it may cause an increase in manufacture price. There is currently no climatic data that can be used as criteria for the tests in the Korean peninsula and coastal seas. Therefore, this paper suggests a water temperature and a salinity guidelines of salt fog tests for military products used in the area. As a result, we present water temperature and salinity information that is extreme and FOO of the Korean coastal seas.

• Convergence Security Journal
• /
• v.21 no.1
• /
• pp.177-189
• /
• 2021

Defense R&D is a key process for securing weapons systems determined by mid- and long-term needs to cope with changing future battlefield environments. In particular, the test and evaluation provides information necessary to determine whether or not to switch to mass production as the last gateway to research and development of weapons systems and plays an important role in ensuring performance linked to the life cycle of weapons systems. Meanwhile, if you look at the recent changes in the operational environment of the Korean Peninsula and the defense acquisition environment, you can see three main characteristics. First of all, continuous safety accidents occurred during the operation of the weapon system, which increased social interest in the safety of combatants, and the efficient execution of the limited defense budget is required as acquisition costs increase. In addition, strategic approaches are needed to respond to future battlefield environments such as robots, autonomous weapons systems (RAS), and cyber security test and evaluation. Therefore, in this study, we would like to present strategies for improving the testing and evaluation of weapons systems by considering the characteristics of the security environment that has changed recently. To this end, the improvement strategy was derived by analyzing the complementary elements of the current weapon system operational test and evaluation system in a multi-dimensional model and prioritized through the hierarchical analysis method (AHP).

• Journal of the Korea Convergence Society
• /
• v.6 no.6
• /
• pp.285-291
• /
• 2015

FTMS, TCS, ITS equipment such as high-pass highway are just a situation that does not lack traceability and passive surveillance is related to fault DB has so far consisted of an integrated operations management to maximize utilization of the facility. In addition, there is no replacement parts are replaced when a failure occurs, increasing the number of parts and repair time I have trouble growing, and becoming a service interruption whenever you replace each time. In this study, proactively manage the failure history of a highway facility ITS tries to preventive maintenance. Therefore, the error history is based on the reliability of the high-pass facilities theory to calculate the reliability of the system through a systematic statistical analysis Operational Availability. The fault number and the time the replacement period through the estimate decreases and can reduce the budget expenses by securing the spare parts quantity, establish a management plan in part by improving the quality of the system through constant preventive maintenance, quality of service at all times It may direct the non-stop operation state of the available state.