• Tunnel and Underground Space
• /
• v.30 no.4
• /
• pp.306-319
• /
• 2020

Characterizations of Excavation Damage Zone (EDZ), which is hydro-mechanical degrading the host rock, are the important issues on the geological repository for the spent nuclear fuel. In the DECOVALEX 2019 project, Task G aimed to model the fractured rock numerically, describe the hydro-mechanical behavior of EDZ, and predict the change of the hydraulic factor during the lifetime of the geological repository. Task G prepared two-dimensional fractured rock model to compare the characteristics of each simulation tools in Work Package 1, validated the extended three-dimensional model using the TAS04 in-situ interference tests from Äspö Hard Rock Laboratory in Work Package 2, and applied the thermal and glacial loads to monitor the long-term hydro-mechanical response on the fractured rock in Work Package 3. Each modelling team adopted both Finite Element Method (FEM) and Discrete Element Method (DEM) to simulate the hydro-mechanical behavior of the fracture rock, and added the various approaches to describe the EDZ and fracture geometry which are appropriate to each simulation method. Therefore, this research can introduce a variety of numerical approaches and considerations to model the geological repository for the spent nuclear fuel in the crystalline fractured rock.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1489-1498
• /
• 2013

The monolithically coupled finite element analysis for a deformable unsaturated soil slope is performed to investigate the effect of antecedent rainfall which is assumed by initial conditions varying degree of saturation (36, 51, 77%) in finite element analysis. The distributions of matric suction and deformation on slope surface obtained from numerical simulation show the instability of antecedent rainfall-induced unsaturated soil slope. Moreover, the numerical analysis using Drucker-Prager model can be checked if a soil slope has reached failure (trial failure criterion $f^{tr}$ >0, plastic behavior) or not (trial failure criterion $f^{tr}$ < 0, elastic behavior). It is found that displacement of slope surface layer increases and the matric suction on soil slope decreases with an increase of initial degree of saturation by antecedent rainfall. Especially, the matric suction of the soil slope in dry condition (S=36%) rapidly decreases rather than that in wet condition (S=51%) at the same rainfall duration. The results of the trial failure criterion ($f^{tr}$ > 0) show slope instability in the toe region and surface of the slopes.

• Journal of Korea Water Resources Association
• /
• v.31 no.1
• /
• pp.85-93
• /
• 1998

This study is to analyze and predict the contaminant transport based on the hydrauli characteristics using 2-dimensional finite element model. The dynamic wate quality model. RMA-4. is used to predict the contaminant transport using the hydrulic characteristics obtained from RMA-2v model. The study region is from downstream of Cham-sil weir to upstream of Shin-Kok weir. From the results of contaminant transport analysis. it is shown that the variations of discharge and velocity give quite large effect to the transport and dispersion of contaminant material. and that the water qualities of Joong-Rang and Tan streams play an important role to the downstream also. when the incidental contaminant accident occurs and contaminant material moves to the downstream. it is resulted the decreasing of the maximum COD and the increasing of the duration time to be affected by contaminant. Finally. 2-dimensional analysis is required in the case of large river like Han River. since the large difference of contaminant concentration has been investigated in the left and right bank.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.11
• /
• pp.45-57
• /
• 2017

Temperature change affects consolidation behavior of soft clays. The increase of temperature in soft clays induces the increase of pore water pressure. The dissipation of the excess pore water pressure decreases volume and void ratio. Also, the consolidation rate is accelerated by high temperature which induces the decrease of viscosity of pore fluid. The effects of temperature on the consolidation behavior such as consolidation settlement, consolidation time, and pore water pressure were investigated in this study. A numerical analysis of hydro-mechanical (HM) and thermo-hydro-mechanical (THM) behavior was performed. The combination of heat injection and sand drain for consolidating the soft ground, with varying temperature (40 and $60^{\circ}C$) and sand drain diameter (40, 60, and 80 mm), was considered. The results show that the temperature inside soil specimen increases with the increase of the temperature of heating source and the diameter of sand drain. Moreover, the heat injection increases the excess pore water pressure and, accordingly, induces additional settlement in overconsolidated (OC) state and reduces the consolidation time in normally consolidated (NC) state.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.148-148
• /
• 2020

산업의 고도화가 진행됨에 따라 화학원료의 사용이 증가하고 있고 독성을 가진 화학물질이 하천으로 유입되는 사고가 빈번하게 발생하고 있다. 수환경으로 유입되는 유해화학물질은 주로 무색무취의 물질들로 사고가 발생하더라도 초기 발견이 어려워 어류폐사를 유발하거나 취수시설에서 용수로 취수되는 경우가 발생하기 때문에 이에 대한 대응책 마련이 필수적이다. 하천에 유입된 오염물질의 거동을 신속하게 예측하기 위해 1차원 오염물질 추적 모형이 활용되는데, Fickian 이송-분산 모형(Fickian Advection-dispersion equation model; FADE)이 주로 사용되고 있다. 하지만 FADE는 오염물질이 하천 저장대에서 지체되는 현상을 반영하지 못하기 때문에 농도곡선의 왜곡도를 구현하지 못하는 단점을 가지고 있다. 따라서 본 연구에서는 하천저장대모형(River Storage Model; RSM)을 개발하고 이를 국가하천인 감천에 적용하였다. 본 연구에서 개발한 RSM은 분산계수, 본류대 면적, 저장대 면적, 저장대 교환계수의 네 가지 매개변수를 통해서 하천의 물질 저장 및 교환 특성를 구현한 non-Fickian 모형으로서, 생화학반응, 휘발, 흡·탈착항을 추가하여 유해화학물질의 혼합 거동을 정확하게 모의할 수 있도록 개발하였다. 저장대 모형의 매개변수를 산정하기 위해서 하천 유량과 지형자료를 기반으로 HEC-RAS를 모의하여 계산된 수리특성을 입력변수로 사용하였다. 저수기, 평수기, 풍수기 유량을 기준으로 세 경우의 시나리오 모의를 수행하였는데, 5ton의 톨루엔이 김천산업단지에서 감천으로 유입된 경우 약 20km 하류에 위치한 취수장에서 톨루엔의 농도변화를 예측했다. 보존성 물질에 대한 모의 결과, 풍수기의 경우 저수기에 비해 유속이 크기 때문에 취수장에서 20.56시간 먼저 기준농도에 도달하고, 7.21시간 더 짧게 머무는 것으로 나타났다. 유해화학물질의 반응특성에 대한 민감도 분석을 시행한 결과, 생화학적 반감기가 18.98시간보다 길고, 옥탄올-물 분배계수가 2.267 이하인 물질은 생분해 및 흡·탈착 반응에 둔감한 것으로 나타났다. 1m 수심 기준 0.114m/s 이하 유속에서의 하천 수리조건에서는 화학물질의 휘발성을 무시할 수 있는 것으로 밝혀졌다.

• Clean Technology
• /
• v.25 no.3
• /
• pp.206-222
• /
• 2019

Recently, various multiphase flows have been developed, and among them some models have been commercialized. However, most of them have been developed based on a pressure-based approach; therefore, various numerical difficulties were involved inherently. Accordingly, in order to overcome these numerical difficulties, a multiphase flow model, MultiPhaSe flow (MPS), following a fractional-flow based approach was developed. In this study, by combining a contaminant transport module describing an enhanced dissolution effect of a surfactant with MPS, a MultiPhaSe flow and TranSport (MPSTS) model was developed. The developed model was verified using the analytical solution of Clement. The MPSTS model can simulate the process of surfactant enhanced aquifer remediation including interphase mass transfer and contaminant transport in multiphase flow by using the coupled particle tracking method and Lagrangian-Eulerian method. In this study, a surfactant was used in a non aqueous phase liquid (NAPL) contaminated area, and the effect of hydro-geological heterogeneity in the layered media on remediation efficiency was studied using the developed model. According to the numerical simulation, when hydraulic conductivity in a lower layer is 10 times, 20 times, and 50 times larger than that in an upper layer, the concentration of dissolved diesel in the lower layer is much higher than that in the upper layer because the surfactant moves faster along the lower layer owing to preferential flow; thus, the surfactant enhances dissolution of residual non aqueous phase liquid in the lower layer.

• Tunnel and Underground Space
• /
• v.28 no.6
• /
• pp.670-691
• /
• 2018

This study presents the research results of the BMT(Benchmark Model Test) simulations of the DECOVALEX-2019 project Task B. Task B named 'Fault slip modelling' is aiming at developing a numerical method to predict fault reactivation and the coupled hydro-mechanical behavior of fault. BMT scenario simulations of Task B were conducted to improve each numerical model of participating group by demonstrating the feasibility of reproducing the fault behavior induced by water injection. The BMT simulations consist of seven different conditions depending on injection pressure, fault properties and the hydro-mechanical coupling relations. TOUGH-FLAC simulator was used to reproduce the coupled hydro-mechanical process of fault slip. A coupling module to update the changes in hydrological properties and geometric features of the numerical mesh in the present study. We made modifications to the numerical model developed in Task B Step 1 to consider the changes in compressibility, Permeability and geometric features with hydraulic aperture of fault due to mechanical deformation. The effects of the storativity and transmissivity of the fault on the hydro-mechanical behavior such as the pressure distribution, injection rate, displacement and stress of the fault were examined, and the results of the previous step 1 simulation were updated using the modified numerical model. The simulation results indicate that the developed model can provide a reasonable prediction of the hydro-mechanical behavior related to fault reactivation. The numerical model will be enhanced by continuing interaction and collaboration with other research teams of DECOVALEX-2019 Task B and validated using the field experiment data in a further study.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.9
• /
• pp.5-15
• /
• 2015

In this study, rainfall-induced slope stability and coupling effect are investigated using hydro-mechanical finite element model. This model is developed by formulating constitutive and coupled balance equations and is verified by comparing the numerical results with field matric suction. The homogeneous soil layer (soil column) and soil slope are modeled by this model, and the results of variation in matric suction, mean effective stress, porosity, displacement, factor of safety are compared with those of staggered analysis. It is found that the vertical and horizontal displacement from coupling analysis considering change in porosity is larger than that of staggered analysis. The displacement and matric suction from coupling analysis by rainfall infiltration can affect slope instability, which shows a progressive failure behavior. The lowest factor of safety is observed under short-term rainfall. This results confirm the fact that coupling analysis is needed to design soil slope under severe rain condition.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.908-908
• /
• 2012

국내 기후 특성상 하절기에 집중되는 강우로 인해 댐의 건설을 홍수조절, 용수확보 및 전력생산 등의 목적에 있어서 불가피하다. 이와 같은 저수지와 하류하천은 댐 수문 개폐에 따라 흐름변화로 인하여 수체의 거동 및 수질 변화가 발생하며, 일반적인 하천과는 다른 특성을 지니게 된다. 또한 수심이 깊은 저수지의 경우에는 흐름방향과 더불어 수심 방향의 특성도 중요하며, 수리 및 수질 모형의 연계를 통한 3차원적인 해석을 필요로 한다. 유역 내 지상 또는 대기에서 발생한 모든 오염물질은 강우에 의해 하천과 호수와 같은 수체로 유입되며, 강우가 발생했을 때 유역의 토지피복 상태와 수리, 지형, 강우강도, 토양의 특성에 의해 하천으로 유입되는 오염물질의 농도와 부하특성이 달라진다. 비점오염물질의 축적이 가능한 호수나 저수지에서는 비점오염원의 유입이 더 큰 문제가 되며, 유량이 극히 미미한 하천의 경우에는 강우초기에 일시에 집중적으로 유입되는 초기 오염 부하량이 문제가 된다. 강우유출수의 하천 유입은 강우 현상과 밀접한 관계를 맺고 있으므로 그 제어가 쉽지 않다. 이러므로 이를 총괄하는 유역통합관리기술이 필요로 하며, 기존의 유역통합관리기술은 댐 상류유역을 중심으로 개발되고 있으며, 댐 상류유역과 저수지, 하류하천으로 구분되어 연구되어 왔다. 또한 각각의 모형이 개별적으로 적용되어 통합적인 평가시스템이 표준화되지 않은 관계로 댐 상하류 모니터링 자료가 연계된 실무 적용이 이루어지지 않고 있다. 따라서 하천 수리 수문학적 역학구조를 이해하고 그 특성에 적합하게 평가할 수 있는 표준화된 시스템이 구축되어야 한다. 또한 효과적인 유역통합관리를 위해서는 하천의 현재 뿐만 아니라 장래에 대한 예측부분도 포함되어야 한다. 본 연구에서는 댐 유역에서의 유출과 수질 변화를 모의하고 이를 이용하여 저수지 내에서의 오염물질 거동에 대해서 해석하였다. 또한 기후변화에 따른 유역, 저수지 및 하천에 미치는 영향을 고려하기 위하여 고해상도 지역기후전망 모의자료를 이용하여 수문학적 스케일로 통계적 상세화한 후 지역별 상세수문시나리오를 생산하여 미래 예측에 활용하였다. 기후변화 시나리오의 상세화를 통한 상세지역의 기후를 예측하고, 예측된 기상자료를 이용하여 유역모델을 모의하여 미래의 유출 및 수질 변화를 파악할 수 있는 기술 개발로 인해 저수지의 운영에 도움을 주고, 주수지의 치수증대 사업 등 유출의 변화에 따른 하류하천 변화를 파악할 수 있고, 기후변화에 따른 하류하천에 대한 홍수기 때 치수, 이수 및 방재에 대하여 기초자료를 제공할 수 있을 것으로 판단된다.

• Journal of Industrial Technology
• /
• v.25 no.B
• /
• pp.19-25
• /
• 2005

To use land more efficiently under urbanization trend, Kangwon Province often covers open channels of creeks and uses them as parking lots or roads. A covered open channel section tends to form a rectangular culvert. Therefore, a creek with covered open channels can function as a storm drain. At the time of light rainfall, there are no significant differences except water flowing pattern between a creek with a covered open channel and a creek without it. Recently, however, the frequent occurrence of heavy rainfalls limited at a small, definite area has become problematic. When the heavy rainfall causes the carrying capacity of a creek to be exceeded,the creek with covered open channel has a more serious problem than the creek without it has. Therefore, we made an interpretation of data and conducted hydraulic model experiment to come up with economical solution to this problem.