• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.1
• /
• pp.25-33
• /
• 2008

Water waves are generated mainly by winds in open seas and large lakes. They carry a significant amount of energy from winds into near-shore region. Thereby they significantly contribute to the regional hydrodynamics and transport process, producing strong physical, geological and environmental impact on coastal environment and on human activities in the coastal area. Furthermore an accurate prediction of the hydrodynamic effects due to wave interaction with offshore structures is a necessary requirement in the design, protection and operation of such structures. In the present paper surface and internal waves scattering by thin surface-piercing and bottom-standing vertical barriers in a two-layer fluid is analyzed in two-dimensions within the context of linearized theory of water waves. The reflection coefficients for surface and internal waves are computed and analyzed in various cases. It is found that wave reflection is strongly dependent on the interface location and the fluid density ratio apart from the barrier geometry.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2B
• /
• pp.161-170
• /
• 2006

A tracer test technique using a radioisotope was proposed to investigate pollutant mixing characteristics in rivers. The main advantages of radioisotope as a tracer in field tests are that it can be detected easily, and that its detection range is quite large. Also, using the radioisotope, the amount sorbed by the bed material and the biota may be a minimum. Field tracer tests were conducted at seven different sites in natural rivers with various meandering pattern. Based on the acquired data, the behavior of the tracer cloud in the intermediate-field was examined two-dimensionally, and dispersion coefficients were calculated using several evaluation methods. Results revealed that the tracer cloud was transported skewed to the outer bank and dispersion coefficients in bends were larger than those in straight reaches.

• Korean Journal of Environment and Ecology
• /
• v.33 no.6
• /
• pp.636-644
• /
• 2019

The purpose of this study was to investigate the callings of nocturnal birds using bioacoustic recording technology to identify species and to analyze the ecological characteristics of each species. Three sites - Seoraksan National Park, National Institute of Ecology, and Mudeungsan National Park - were investigated. The investigation period was from the middle of April 2018 to early March 2019 for Seoraksan national park, from late February of 2018 to the middle of February 2019 for the National Institute of Ecology, and from the middle of February 2018 to the end of August 2018 for Mudeungsan National Park. The main research results are as follows. Firstly, nocturnal bird species identified by the survey included Caprimulgus indicus, Otus sunia, Zoothera aurea, Bubo bubo, and Strix uralensis, 5 species in total. Secondly, the breeding call period of each species was from early May to early August for C. indicus, from early April to the end of September for O. sunia, from early March to early October for Z. aurea, from late September to early February for B. bubo, and from mid-January to early March for S. uralensis. Thirdly, the mating call rhythm was between 16:00 and 10:00 on the following day for all the observed species in the three regions, and the peak time zone was from 20:00 to 06:00 on the following day. Fourthly, there was no correlation between the cumulative call frequency and the precipitation for each species. Fifthly, the mean temperature during the period when the specific calls of nocturnal birds were detected was -4.00 ℃ for S. uralensis, 2.58 ℃ for B. bubo, 13.66 ℃ for Z. aurea, 19.50 ℃ for O. sunia, and 20.77 ℃ for C. indicus. The ANOVA results showed that there was a significant difference in mean temperature for the calling by species and that the mean temperature was S. uralensis, B. bubo, Z. aurea, and O. sunia-C. indicus, in the ascending order, for 4 groups in total. The period of the specific mating calls confirmed by the study is a period in which the frequency of calls was the highest among the periods when the specific calls were detected. Since it is associated with the known mating period of each species, the period of the high frequency of calls confirmed by the bioacoustic monitoring can be regarded as the mating season. This study is meaningful in that it is the early research that has used the bioacoustic recording technology to identify species and ecological characteristics of species of nocturnal birds in Korea.

• The Korean Journal of Archival Studies
• /
• no.19
• /
• pp.3-55
• /
• 2009

Records of architectural cultural properties, in case of accidents, show who are to blame, present what evidences are to establish the cause, and also are used for checking if there were any problem in policies and regulations in preserving and caring architectural cultural properties. These records are of great importance in their roles and are of essential use regardless of time and space. Considering its significance, In that architectural cultural properties requires setting clear goals and directions and as well, criteria, for management, we need methods of systematical control and consideration for its characteristics. This research started with the sense of purpose that managing architectural cultural properties are in need of systematic and concrete control, based on the perception that they need protecting and transmitting. The goal of this thesis is to work on the current archiving status of architectural cultural properties by monitoring patterns and processes in archival administration, to diagnose problems by looking into the records creation and management, and to present the improvement plan which would lead to the architectural cultural properties' more efficient management and better use in the future. The management of architectural cultural properties begins with registering and assigning. Cultural Heritage Administration is in charge of control, supervision, and budget and local governments deal with direct management. Accordingly, records are by the hands of each local governmental body. Currently, each cultural property has its management depending on every different working environment in each governmental body. Architectural cultural properties needs managing in one body through the synthetic and unified, concrete and systematic manual and guide for management. Archiving architectural cultural properties have need of unitive management through a professional system, considering the physical characteristics and history of archiving. Unified management system will enhance efficiency and actual use of architectural cultural property records if one governmental body undertakes uniting records through standardization and professional supervision, and data-based unified search engine would enhance efficiency and actual use. Therefore, I suggest that Archives for Architectural Cultural Properties should be established as a professional Archives and wholly responsible body for the purpose of systematically and unifiedly managing architectural cultural property records with professional personnel and facility and transmitting their historical, cultural, and academic value. In Korea, studies up to the present have mainly focused on managing architectural records and records of drawing while few efforts were made to directly deal with managing architectural cultural properties themselves. The focus of this thesis is to study the current status and establish problems of the management of architectural cultural properties in administrative process, and as a result, to propose to establish Archives for Architectural Cultural Properties as a professional archives.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1383-1389
• /
• 2009

This paper describes an Energy Efficient Timetabling Problem(EETP). In these days, the researches on development of an energy efficient railway systems are highlighted over the world. The departures occurred in an electrical power feeding circuit at the same time are necessary to be reduced as far as possible, to minimize the energy consumption. The paper addresses the operational requirements and facility restrictions to construct a mathematical model for EETP. In addition, it suggests several types of objectives for the model.

• Tunnel and Underground Space
• /
• v.32 no.6
• /
• pp.464-477
• /
• 2022

DFN (discrete fracture network) models that take account of spatial variability and correlation between rock fractures have been demanded for analysis of fractured rock mass behavior for wide areas with high reliability, such as that of underground nuclear waste repositories. In this regard, this report describes the spatial distribution characteristics of fracture networks, and the DFN modeling methodologies that aim to represent such characteristics. DFN modeling methods have been proposed to represent the spatial variability of rock fractures by defining fracture domains (Darcel et al., 2013) and the spatial correlation among fractures by genetic modeling techniques that imitate fracture growth processes (Davy et al., 2013, Libby et al., 2019, Lavoine et al., 2020).These methods, however, require further research for their application to field surveys and for modeling in-situ rock fracture networks.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.10
• /
• pp.694-701
• /
• 2012

The main purpose of this study is to evaluate of backwash system of hydrodynamic separator filter (HSF) with solar powered submerged pumps. It consists of a photovoltaic solar array, control electronics, battery, and two submersible pump powered by a 12 voltage DC motor. The laboratory scale study on treatable potential of micro particles using backwash HSF that was a combined with perlite filter cartridge and backwash nozzles. Since it was not easy to use actual storm water in the scaled-down hydraulic model investigations, it was necessary to reproduce ranges of particle sizes with synthetic materials. The synthesized storm runoff was made with water and addition of particles; ion exchange resin partices, silica gel particles, and commercial area manhole sediment particles. HSF was made of acryl resin with 250 mm of diameter filter chamber and overall height of 800 mm. Four case test were performed with different backwashing conditions and determined the SS removal efficiency with various surface loading rates. The operated range of surface loading rate was about 308~$1,250m^3/m^2/day$. It was found that SS removal efficiency of HSF using two submersible pumps improved by about 18% compared with HSF without backwash. Nonpoint control devices with solar water pumping systems would be useful for backwashing the filter in areas with not suppling electricity and reduce filter media exchange cost.

• Water for future
• /
• v.29 no.5
• /
• pp.139-150
• /
• 1996

This paper presents the effect of numerical parameters, such as grid size and grid ratio, on the outflow hydrograph of a unit-width plane in the linear Muskingum-Cunge method. The numerical results depend on Courant number C and cell Reynolds number D, two physically and numerically meaningful parameters. As C approache 1 and D increases, the numerical dispersion-relating oscillations are difficult to occur. The numerical oscillations occur in the front of a propagating wave for C < 1, while smaller oscillations occur behind the wave for C > 1 due to the numerical diffusion effect. For a plane with a small value of characteristic reach length L (e.g., a steep plane), the numerical solution of the Muskingum-Cunge method is similar to that of the kinematic wave method, which shows no wave attenuation. However, for a plane with a large value of L (e.g., a mild plane), the Muskingum-Cunge method leads to the diffusion waves which are essentially independent of the Courant number. Accordingly, the Muskingum-Cunge method will be suited for the routing of the catchment with relatively mild slopes.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.200-200
• /
• 2021

하천은 용수공급, 관개, 친수활동, 산업활동 등 인간의 활동에 중요한 역할을 한다. 이에 따라 수질관리는 필수적이며 유기물, 중금속, 화학물질 등의 용존물질들은 수질문제에 직접적으로 영향을 미친다. 따라서 하천에서의 용존물질의 혼합 거동을 파악하기 위한 연구가 지난 수십년간 이루어지고 있다. 하천 흐름에 따른 오염물질의 이동 및 확산 거동을 예측하기 위하여 1차원 추적모형이 활용되는데, 그 중 하천저장대 모형(Transient Storage Model, TSM)은 자연하천의 복잡하고 불규칙한 수리·지형적인 특성을 단순하게 반영할 수 있다는 장점때문에 가장 많이 사용된다. 하지만 TSM은 매개변수에 대한 의존성과 불확도가 크며, TSM의 저장대에서의 농도분포에 대한 지수함수형태의 모델링이 하상간극수역(Hyporheic zone)에서의 저장대 특성을 반영하기에 구조적으로 부정확하다는 단점이 제기되고 있다. 최근 이러한 TSM의 단점을 보완하고 하천에서의 저장대 메커니즘을 보다 정확하게 구현하고자 체류시간분포(residence time distribution)를 이용한 확률론적 저장대 모델링 프레임워크가 등장하고 있다. 본 연구에서는 본류대와 저장대에서의 오염물질의 체류시간분포를 분리하여 해석하고 이를 전달함수(transfer function)를 이용한 합성곱으로 결합한 형태의 프레임워크를 적용하여 모델링하였다. 상기의 모형을 검증하기 위하여 2019년 감천의 4.85km 구간에서 추적자 실험을 실시하였다. 실험 당시 유량은 12.9 m³/s로 풍수기에 해당되며 평균 유속은 약 0.6 m/s로 측정되었다. 모형의 매개변수는 추적자 실험으로부터 최적화 기법을 통해 역모델링기법으로 결정하였다. 제안된 모형에 의한 모의 결과를 추적자 실험에서의 농도측정자료와 비교한 결과, 평균 0.988의 결정계수를 보여 매우 높은 정확도를 보이고 있음을 알 수 있었다. 저장대특성을 나타내는 농도곡선의 꼬리부에 대하여 같은 조건에서 1차원 이송-분산(ADE) 모형, TSM의 모의결과와도 비교한 결과 본 모형은 추적자 실험 농도측정 결과와 평균 0.195의 오차율을 보이며, 이는 ADE 모형과 TSM의 오차율인 14.03과 1.866에 비해 매우 정확한 것으로 나타났다.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.4
• /
• pp.293-300
• /
• 2016

Purpose: The purpose of this study is finding proper bonding agents to be used when adding bis-acryl composite provisional materials. Materials and Methods: Three bonding agents with different chemical compositions were included in this study. Forty disk shaped specimens of bis-acryl composite provisional material were prepared and divided into 4 groups according to the bonding agents. Control group didn't have bonding agent. Through the Teflon mould with 4.0 mm diameter hole with 4.0 mm thickness the same bis-acryl composite provisional material was added on the disks after the surface of each specimen was treated with designated bonding agent according to the manufacturer's instructions. Shear bond test was performed and the fractured surfaces were inspected with a microscope. One-way analysis of variance was conducted and the result was further analysed with Turkey post hoc test at the significance level of 0.05. Results: The highest strength was acquired from the specimens bonded with chemical cure system and it was statistically significant (P < 0.05). This group showed 100% cohesive failures. The lowest bonding strength was recorded from the specimens used conventional light cure bonding agent, and this group's result was similar with the control group. The group used a light cure bonding agent claiming improved compatibility revealed significantly higher bond strength to the traditional light cure bonding agent group in a statistically significant way (P = 0.043). Conclusion: According to the bonding agent used the shear bond strength was significantly affected. Therefore the choice of proper bonding agent is important when hiring a bonding agent to add bis-acryl composite provisional materials.