• Current Research on Agriculture and Life Sciences
• /
• v.2
• /
• pp.115-121
• /
• 1984

Some investigations on chronic mastitis in dairy cattle in Taegu-Kyungpook Provinces from the beginning of October, 1984 till the end of August, 1985 were conducted with the particular regard to the causative agents and their drug susceptibility. Milk samples from 83 isolated cases of chronic mastitis cattle were investigated bacteriologically and the causative organisms recovered were examined for their antibiotic susceptibility by using disc diffusion susceptibility technique against the major antibiotics of current veterinary use. Major causative agents involved in chronic mastitis in Taegu-Kyungpook Provinces were in order of prevalence Staphylococcus spp. (48.2 %), Escherichia coli (18.1 %), Candida spp. (10.8 %) and Corynebacterium spp. (8.4 %), Streptococcus agalactiae (3.6 %), Bacillus cereus (3.6 %) and Pseudomonas aeruginosa (2.4 %) were found to be one of the minor agents. The majority of staphylococcal isolates and E. coli were highly resistant to the most antibiotics tested. The percentages of staphylococcal cultures resistant to penicillin, methicillin, lincomycin, novobiocin, ampicillin and tetracycline were 87.2 %, 78.7 %, 68.1 %, 61.7% and 57.4 %, respectively, while the majority of them were susceptible to gentamicin(78.7 %), cephalothin(76.6 %) and chloramphenicol (74.5%). E. coli isolates were found to be highly resistant to streptomycin, cephalothin, tetracycline and ampicillin while the majority of them were susceptible to colistin (83.3 %), gentamicin (77.8 %) and chloramphenicol (66.7 %). Corynebacterium spp. were susceptible to ampicillin, chloramphenicol, erythromycin, gentamicin, oleandomycin and tetracycline although they showed resistance to novobiocin and penicillin. Two cultures of Pseudomonas aeruginosa recovered from mastitis milk were highly resistant to the antibiotics employed in the present study.

• Current Research on Agriculture and Life Sciences
• /
• v.4
• /
• pp.77-86
• /
• 1986

The purpose of this study is to estimate an optimum formula of rainfall intensity on basis of the characteristics for short period of rainfall duration in Kyungpook province for the design of urban sewerage and small basin drain system. Results studied are as follows; 1. The optimum method for Taegu and Pohang, Iwai's and Gumbel-Chow's method are recommended respectively. 2. The opotimum type of rainfall intensity for these area, $I=\frac{a}{\sqrt{t}+b}$ (Japanese type), is confirmed with 2.52~4.17 and 1.86~4.54 as a standard deviation for Taegu and Pohang respectively. The optimum formula of rainfall intensity are as follows. Taegu : T : 200 year - $I=\frac{824}{\sqrt{t}+1.5414}$ T : 100 year - $I=\frac{751}{\sqrt{t}+1.4902}$ T : 50 year - $I=\frac{678}{\sqrt{t}+1.4437}$ T : 30 year - $I=\frac{623}{\sqrt{t}+1.4017}$ T : 20 year - $I=\frac{580}{\sqrt{t}+1.3721}$ T : 10 year - $I=\frac{502}{\sqrt{t}+1.3145}$ T : 5 year - $I=\frac{418}{\sqrt{t}+1.2515}$ Pohang : T : 200 year - $I=\frac{468}{\sqrt{t}+1.1468}$ T : 100 year - $I=\frac{429}{\sqrt{t}+1.1605}$ T : 50 year - $I=\frac{391}{\sqrt{t}+1.1852}$ T : 30 year - $I=\frac{362}{\sqrt{t}+1.2033}$ T : 20 year - $I=\frac{339}{\sqrt{t}+1.2229}$ T : 10 year - $I=\frac{299}{\sqrt{t}+1.2578}$ T : 5 year - $I=\frac{257}{\sqrt{t}+1.3026}$ 3. Significant I.D.F. curves derived should be applied to estimate a suitable rainfall intensity and rainfall duration.

• Current Research on Agriculture and Life Sciences
• /
• v.30 no.2
• /
• pp.68-75
• /
• 2012

This study was conducted to monitor the yields of useful substances extracted from Inonotus obliquus. Optimization of ultrasonic-assisted extraction process was carried out by using response surface methodology under different extraction conditions. A central composite design was applied to investigate the effects of independent variables such as extraction time ($X_1$), ethanol concentration ($X_2$) and extraction temperature ($X_3$) on dependent variables such as soluble solid yield ($Y_1$), total phenol contents ($Y_2$), total flavonoid contents ($Y_3$) and browning color($Y_4$). Soluble solid yield was affected by ethanol concentration and extraction temperature. The maximum soluble solid yield was 18.02% at 20.47 min ($X_1$), 42.85% ($X_2$) and $69.57^{\circ}C$ ($X_3$) in saddle point. Total phenol contents were highly affected by ethanol concentration and extraction temperature. The maximum total phenol contents were 71.57mg GAE/g at 21.60min ($X_1$), 45.19% ($X_2$), $69.68^{\circ}C$ ($X_3$). The electron donating ability was affected by extraction temperature and extraction time. Total flavonoid contents were affected by only extraction temperature. The maximum total flavonoid contents were 35.98 mg RE/g at 22.53min ($X_1$), 46.37% ($X_2$), $69.56^{\circ}C$ ($X_3$) in saddle point. The browning color was highly affected by extraction time, ethanol concentration and extraction temperature. The maximum browning color was at 22.00 min ($X_1$), 46.89% ($X_2$), $69.71^{\circ}C$ ($X_3$) in saddle point. As a result, the optimum extraction conditions were predicted; extraction time of 21.50 min, ethanol concentration of 44.87% and extraction temperature of $69.635^{\circ}C$.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.962-973
• /
• 2017

Concerns about an air pollution are gradually increasing at home and abroad. The automotive and fuel researchers are trying to reduce emissions and greenhouse gases of vehicles through a research on new engine designs and innovative after-treatment systems using clean fuels (eco-alternative fuel) and fuel quality improvements. In this paper, we stduy the emission characteristics of greenhouse gases on seven vehicles using gasoline, diesel, and LPG by legal test mode in domestic and abroad.(Urban mode, Highway mode, rapidly acceleration and deceleration, using air conditioner, low temperature condition) Regardless of fuels, most of the greenhouse gases tend to show the worst results in cold FTP-75 mode. In the case of A vehicles (2.0 MPI) and B vehicles (2.4 GDI) using a gasoline fuel, the factors that increase greenhouse gases are in order of a rapidly acceleration and deceleration, using air conditioner, low temperature condition. But G vehicles(LPLi) have different emission characteristics from another vehicles. In the case of A vehicles (2.0 w/o DPF) and B vehicles (2.2 with DPF) using a diesel fuel, the factors that increase greenhouse gases are in order of a rapidly acceleration and deceleration, using air conditioner, low temperature condition. However, the factor of F vehicles are in order of low temperature condition, using air conditioner, rapidly acceleration and deceleration. In conclusion, it will be an effective method to apply different technologies of emission reduction for each fuel.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.827-838
• /
• 2017

Twenty male soccer players volunteered as the experimental subjects. The subjects were randomly assigned to the "Winter training with Cornus officinalis extract intake group"(WCI; n=10) and "Winter training group"(WT; n=10). The variables of blood fatigue substance, muscle damage and liver function where measured in all the subjects before the start of the Cornus officinalis intake after at the end of the 4 weeks winter training. Winter training program was proceeded with 6 days a week for 4 weeks. Exercise intensity was measured using the HRR(70~95%). Changes in the heart rate were also measured with the Polar. WCI group were ingested 80 mL of Cornus officinalis extract after every breakfast and dinner for 4 weeks. The test data were analyzed by paired t-test, and independent t-test(%diff), and the alpha level of p<.05 was set for all tests of significance. Lactate in WCI group had significantly decreased, and the changes between the groups were significantly lower in the WCI group than in the WT group. Ammonia in WCI group had significantly increased. CK in WCI group had significantly decreased. LDH in both group had significantly decreased. AST in WCI group had significantly decreased, and the changes between the groups were significantly lower in the WCI group than in the WT group. ALT in WCI group had significantly decreased. In conclusion, the results of this study show that Cornus officinalis extract seem to have a positive influence on blood fatigue substance, muscle damage and liver function. Therefore Cornus officinalis extract is considered to be able to contribute an ergogenic aids.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.938-946
• /
• 2017

This study was conducted to examine the changes in serum lipid components and blood glucose by krill (Euphausia superba) meal and sodium fluoride (NaF) in rats fed on experimental diets and administered orally to NaF 10 mg for 5 weeks. Body weight of rats decreased as the amount of krill meal diet increased, it was observed the basal diet plus NaF group (BF group) compared to the lower basal diet group (BD group). The serum concentrations of total cholesterol, LDL (low-density lipoprotein) cholesterol, free cholesterol, triglyceride (TG), phospholipid (PL) and blood glucose in serum were higher in the BF group than the 10% krill meal group plus NaF 10 mg (KF10 group) or BD group, the 20% krill meal plus NaF 10 mg group (KF20 group), the 30% krill meal plus NaF 10 mg group (KF30 group). Conversely depending on the content of krill meal for the HDL (high-density lipoprotein) cholesterol level, it showed higher results. The concentration of total protein was no significant difference among the groups (p<0.05). The results indicate that a krill meal diet effectively inhibited increases in lipid elevation and blood glucose level in the sera of rats.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.874-882
• /
• 2017

As the interest on the air-pollution is gradually rising up at home and abroad, automotiv e and fuel researchers have been working on the exhaust emission reduction from vehicles through a lot of approaches, which consist of new engine design, innovative after-treatment systems, using clean (eco-friendly alternative) fuels and fuel quality improvement. This research has brought forward three main issues : evaporative, performance, air pollution. In addition, researcher studied the environment problems of the bio-ethanol, bio-butanol, bio-ETBE (Ethyl Tertiary Butyl Ether), MTBE (Methyl Tert iary Butyl Ether) fuel contained in the fuel as octane number improver. The researchers have many dat a about the health effects of ingestion of octane number improver. However, the data support the con clusion that octane number improver is a potential human carcinogen at high doses. Based on the bio-fuel and octane number improver types (bio-ethanol, bio-butanol, bio-ETBE, MTBE), this paper dis cussed the influence of gasoline fuel properties on the evaporative emission characteristics. Also, this p aper assessed the acceleration and power performance of gasoline vehicle for the bio-fuel property. As a result of the experiment, it was found that all the test fuels meet the domestic exhaust gas standards, and as a result of measurement of the vapor pressure of the test fuels, the bio - ethanol : 15 kPa and the biobutanol : 1.6 kPa. thus when manufacturing E3 fuel, Increasing the biobutanol content reduces evaporation gas and vapor pressure. In addition, Similar accelerating and powering performance was shown for the type of biofuel and when bio-butanol and bio-ethanol were compared accelerated perf ormance was improved by about 3.9% and vehicle power by 0.8%.

• Journal of Distribution Research
• /
• v.7 no.1
• /
• pp.41-59
• /
• 2002

Analysis about supply chain structure was achieved in product unit that is not 'business' dimension that is existent discussion target in surrounding and supply chain structure as that this study analyzes positively how supply chain structure according to business surroundings of product changes. This can do that analysis of product unit in synthetic supply chain management is essential when recognize the importance that supply chain management must consist by product special quality according to corporation's each product. Sort product environment and studied relation with supply chain structure to achieve study purpose hereupon. Structure variable of supply chain drew through existent literature study here. Executed question investigation for supply chain by product for study that is actual proof enemy, and figure method used analysis of variance (ANOVA) mainly. If summarize result of study, result that analyze relation between business environment of product and supply chain structure, according to business environment of product, showed that supply chain structure changes. Certified that relation of two group (environment group of uncertain product and environment group of stable product) of business environment of product and structure variable (that is number of participant of supply chain, lead time of supply chain, about administration's independence, response points of supply chain) of supply chain is significant relation all from all structure variables except number of participant of supply chain. Variable that express length of supply chain from structure Variable of supply chain is number of participant of supply chain and lead time of supply chain, and variable that display monitoring or trust aspect for supply chain is administration's independence degree and response points of supply chain. As analysis result, product that environment is uncertain is appearing more shortly than product that length of supply chain stabilizes, and also, monitoring or trust aspect for supply chain was proved that is consisting abuzzer than product that stabilize. Therefore, showed that put essential point in administration of 'hierarchy'putting first than 'market' when business environment designs supply chain structure in case of uncertain product, and proved that the other side business environment is focusing in administration way of 'market' putting first in case of stable product.

• Proceedings of the Korean DIstribution Association Conference
• /
• 2005.11a
• /
• pp.29-51
• /
• 2005

Brands are important in the consumer market. They are the interface between consumers and the company, consumers may develop loyalty to brands. also, The late development of industrial marketing explains the near absence of research on Brand Equity in business to business. With recent change, industrial companies have shifted from a production focus to a customer focus. industrial brand is fast developing. The basic purpose of this study is to investigate industrial brand trust and loyalty affecting the Result of business relationship between industrial buyers and suppliers. Factors hypothesized to influence trust in a brand include a number of brand characteristics, company characteristics and consumer-brand characteristics. This research presented a comprehensive constructive model consisting of components of industrial brand trust and loyalty, and then propose the research model base on prior researches and studies about relationships among components of industrial brand loyalty. Data were gathered from respondents who work in industrial buying center. For this study, Data were analyzed by SPSS 10.0 and AMOS 4.0. The results of this research analysis were as fallow. Industrial brand trust and loyalty were positively related with a number of industrial brand characteristics, supplier characteristics and buyer-brand characteristics. relationship commitment. This research newly proposed the concept of 'industrial brand trust and loyalty affecting the Result of business relationship between industrial buyers and suppliers'

• The Journal of the Korea Contents Association
• /
• v.9 no.6
• /
• pp.178-186
• /
• 2009

The quality control is needed to ensure the accuracy of medical information and achieved by evaluating the performance of and maintaining the system and practicing various measurements and evaluations. The Korean Institute for Accreditation of Medical Image, therefore, have held educational program for quality control of special medical equipments. The major of programs participants, however, are radiology specialists with only small number of radiological technologists from some hospitals, furthermore, the follow-up education and the share of information between participants and non-participants are insufficient in general, thus, the knowledge level of radiological technologists, regardless of their participation, is relatively low. This study carried out the questionnaire research for the 500 radiological technologists registered in Korean Society of MRI Technology, on the basis of 2008, and performed analysis for five months from May to Oct., 2008. The questionnaires were delivered by post to each radiological technologists and the response rate was 36%(n=180). The results of this revealed that the 86.7% of respondents felt the necessity of inspection on quality management, while only the 27.8% completed the educational program for manager of special medical equipment. and only the half(53.9%) had the knowledge about inspection on quality management. The completion of educational program had no correlations with sex, age, size of occupying hospital, the number of radiological technologists in occupying site and MRI laboratory, career year of general radiologist and in MRI laboratory, and the presence of biomedical engineering department in occupying hospital. The 78.0% of participants at the educational program for quality management held by the Korean Institute for Accreditation of Medical Image had the knowledge about inspection on quality management(p<.05) whereas the 43.9% of the hospitals held such program and the 54.4% of radiological technologists from those hospitals had related knowledge, which indicated that such programs held by hospitals had not effects on the knowledge level of radiological technologists. This indicates also that the contents, methods, and other conditional factors of educational programs are important for the outcome of them.